Commit Graph
465 Commits
Author SHA1 Message Date
eugene caa0f5da6a multi: move and export funding-related vars to funding package
Also moves the lnd global MaxFundingAmount to server.go
2020-12-17 09:36:34 -05:00
Johan T. Halseth 413ece2ccc itest: account for capped anchor commit fee rate in balance calc 2020-12-15 19:54:50 +01:00
Conner Fromknecht 4af24158c4 Merge pull request #4779 from halseth/anchor-htlc-aggregation
[anchors] HTLC second level aggregation in the sweeper
2020-12-11 16:22:17 -08:00
Oliver Gugger 094545a300 itest: add neutrino errors to whitelist 2020-12-11 08:55:45 +01:00
Johan T. Halseth 1627310fb0 itest: add HTLC aggregation test 2020-12-10 14:24:21 +01:00
Johan T. Halseth 42c51b662a itest/channel_force_close test: handle HTLCs going through sweeper
Now that the HTLC second-level transactions are going through the
sweeper instead of the nursery, there are a few things we must account
for.
1. The sweeper sweeps the CSV locked HTLC output one block earlier than
   the nursery.
2. The sweeper aggregates several HTLC second levels into one
   transaction. This also means it is not enough to check txids of the
   transactions spent by the final sweep, but we must use the actual
   outpoint to distinguish.
2020-12-10 14:24:21 +01:00
Johan T. Halseth 4b9fbe2146 itest/local_chain_claim test: mine one less blocks for anchor sweeps
In case of anchor channel types, we mine one less block before we expect
the second level sweep to appear in the mempool, since the sweeper
sweeps one block earlier than the nursery.
2020-12-10 14:24:21 +01:00
Johan T. Halseth 241e21a0d1 itest: use hex encoded hash in error message 2020-12-10 14:24:18 +01:00
Johan T. Halseth 09f2307d14 itest: increase htlc amt for local force close tests
Since the tests set a quite high fee rate before the node goes to chain,
the HTLCs wouldn't be economical to sweep at this fee rate.

Pre sweeper handling of the second-level transactions this was not a
problem, since the fees were set when the second-levels were created,
before the fee estimate was increased.
2020-12-10 14:24:18 +01:00
Oliver Gugger a08d6c469f itest: update and sort error whitelist 2020-12-09 09:06:14 +01:00
Oliver Gugger af0f39f4a6 itest: fix log whitelist check
Because a previous PR changed the location of the itest log files, we
also need to update the script that looks for non-whitelisted errors.
2020-12-09 08:06:16 +01:00
Conner Fromknecht 2f38a7ce9c itest: increase recovery payment amount so htlc isn't dust 2020-12-08 14:55:40 -08:00
Oliver Gugger 9de659ea4f itest: use require.Eventually where tick speed matters
To not waste a lot of time with the adjusted longer tick interval, we
use a short interval with require.Eventually where we can save some
time.
2020-12-08 21:40:37 +01:00
Oliver Gugger a436618e43 lntest: fix linter errors for changed code 2020-12-08 21:40:36 +01:00
Oliver Gugger 809d238364 itest: wait for server to start when restoring
To avoid running into the "server is still starting" error when trying
to close a channel, we first wait for the error to disappear before we
try closing the actual channel.
2020-12-08 21:40:31 +01:00
Oliver Gugger cdcbc0376d lntest: replace hard coded timeouts
This commit replaces most of the hard coded 10, 15, 20 and 30 second
timeouts with the default timeout. This should allow darwin users to
successfully run the parallel itests locally as well.
2020-12-08 21:37:12 +01:00
Oliver Gugger 3823315820 lntest: go easy on goroutines when polling
In high CPU usage scenarios such as our parallel itests, it seems that
some goroutines just don't get any CPU time before our test timeouts
expire. By polling 10 times less frequently, we hope to reduce the
overall number of goroutines that are spawned because of the RPC
requests within the polling code.
2020-12-08 21:37:11 +01:00
Oliver Gugger 4d2a12e552 itest: fix incorrect error message 2020-12-08 21:37:10 +01:00
Conner Fromknecht 123c3a2530 itest: defer shutdown of nodes in main test method
This ensures that the nodes will properly be shutdown even if one fails
to start or any of them fail to connect. Previously the shutdown is
defered only in the event that the setup was successful.
2020-12-03 23:06:32 -08:00
Conner Fromknecht 374725842e itest: use fresh alice and bob for fwd interceptor tests 2020-12-03 23:06:32 -08:00
Conner Fromknecht 92b820a6d1 itest: move to require in forward_interceptor_test
Certain checks were implemented with Errorf, which only logs the
failure. This results in the test harness panicking further down. We go
further ahead and convert all calls in this file to use require.
2020-12-03 23:06:29 -08:00
Oliver Gugger 36756c012d lntest: use nextAvailablePort for miner and btcd backend
With the new btcd version we can specify our own listen address
generator function for any btcd nodes. This should reduce flakiness as
the previous way of getting a free port was based on just picking a
random number which lead to conflicts.
We also double the default values for connection retries and timeouts,
effectively waiting up to 4 seconds in total now.
2020-12-03 11:30:23 +01:00
Oliver Gugger 2edc3cf98f multi: update to latest btcd version
With this commit we update btcd to the latest version which allows us to
specify the btcd binary we want to use when spinning up a new node.
2020-12-03 11:30:22 +01:00
Oliver Gugger 0a4962a18e itest: run sub itests correctly
To avoid the "Error outside of test" log and to properly terminate the
test if a sub test fails, we need to correctly invoke them using the
RunTestCase method.
2020-12-01 22:24:03 +01:00
Johan T. Halseth 8ec4697fe3 Merge pull request #4810 from Roasbeef/gossip-throttle-config
multi: add new config option to toggle gossip rate limiting
2020-12-01 13:32:52 +01:00
Olaoluwa Osuntokun 94f8311667 Merge pull request #4782 from cfromknecht/anchor-wtserver
watchtower: anchor channel support
2020-11-30 17:49:32 -08:00
Olaoluwa Osuntokun 447c9f2c0b lntest: always turn off gossip throttling for nodes created in itests 2020-11-30 16:39:06 -08:00
Olaoluwa Osuntokun 7e298f1434 Merge pull request #3367 from cfromknecht/batched-graph-updates
Batched graph updates
2020-11-25 18:40:40 -08:00
Conner Fromknecht 82a238317c lncfg+itest: expose configurable batch-commit-interval
This will permit a greater degree of tuning or customization depending
on various hardware/environmental factors.
2020-11-25 16:45:25 -08:00
Olaoluwa Osuntokun 4e079d1d20 lntest/itest: fix SendToRoute in UpdateChanPolicy test
It needs to include the MPP payload  now.
2020-11-25 16:32:15 -08:00
Olaoluwa Osuntokun 7fdf46ea4e lntest/itest: update SendToRoute tests to include payment addr 2020-11-25 16:32:09 -08:00
Olaoluwa Osuntokun d996607470 routing+lnrpc: extend BuildRoute to accept raw payAddr
In this commit, we extend the `BuildRoute` method and RPC on the router
sub-server to accept a raw payment address which will be included as
part of an MPP payload for the finla hop. This change actually also
allows users to craft their own MPP paths using BuildRoute+SendToRoute.
Our primary goal however, was to fix some broken itests since we now
require the payAddr to be present for ALL payments other than key send
payments.
2020-11-25 16:32:02 -08:00
Conner Fromknecht b28bbc3223 wtclinet+itest: expose anchor client via rpc + add itest 2020-11-25 16:16:47 -08:00
Conner Fromknecht f86c26878a lntest/timeouts: fix darwin+kvdb_etcd build
Currently trying to run etcd tests on darwin will cause the timeouts to
improperly select timeouts_darwin.go which are stricter than
timeouts_etcd.go. We fix this by always defaulting to timeouts_etcd.go
no matter the platform, and only falling back to timeouts_darwin.go if
the kvdb_etcd tag is not present.
2020-11-18 15:28:39 -08:00
Conner Fromknecht b70b6d9a6e lntest/timeouts: remove spaces from build predicates
Otherwise this breaks various conditional compilation targets and the
linter.
2020-11-18 15:16:25 -08:00
Andras Banki-Horvath 5f3b800630 lint: fix error reported by the linter 2020-11-18 15:34:46 +01:00
Andras Banki-Horvath efedb5547c itest: timeouts for itets with etcd 2020-11-18 15:34:45 +01:00
Andras Banki-Horvath 369ae5e372 itest: move all test db files when using both etcd and bbolt
In some tests we moved channeld.db to a temp location in order to
"time travel". This commit extends the existing semantics by moving all
files, including embedded etcd db too besides the channeld.db file.
2020-11-18 15:34:45 +01:00
Andras Banki-Horvath 98342433ab itest: add etcd flag to control if new lnd nodes should run on etcd 2020-11-18 15:34:44 +01:00
carla 887ff442db multi: fix verbose output for listsweeps and check all against wallet
Previously, the verbose output of listsweeps would fail if we did not
find some sweeps in our wallet's listtransactions output. This could be
the case for sweeps that were rbf-ed, so the endpoint would fail. This
commit also updates the listsweeps endpoint to always check against the
wallet, so that we do not return these discarded sweeps that never
confirmed.
2020-11-13 13:59:52 +02:00
Andras Banki-Horvath 38e8184926 itest: update error log whitelist 2020-11-12 09:17:53 +01:00
Andras Banki-Horvath 9eac0dd3c9 itest: fix crash in parallel macaroon tests 2020-11-12 09:17:52 +01:00
Andras Banki-Horvath 979c8497b2 itest: add icase to node log filename + restart nodes before each icase
This commit adds the icase name to the log filename, to make it simpler
to find problematic tests. Additionally after this commit we'll restart
Alice and Bob (the base harness nodes) before each icase to start with a
clean state.
2020-11-12 09:17:52 +01:00
Andras Banki-Horvath d6c2ee1bbf itest: use require.NoError in TestLightningNetworkDaemon 2020-11-12 09:17:47 +01:00
Olaoluwa Osuntokun 99b0913562 Merge pull request #3672 from breez/invoice-hints
Allow user specify routing hints in private invoice.
2020-11-11 19:57:49 -08:00
Oliver Gugger 47e8882480 make+itest: allow the same test to be run in parallel 2020-11-10 13:57:31 +01:00
Oliver Gugger 24adf475ce lnd_test: add integration tests for stateless init 2020-11-07 11:24:35 +01:00
Roei Erez 4463a4ce17 invoicerpc: Allow user specify routing hints. 2020-11-06 17:54:20 +02:00
Oliver Gugger a606f462bc itest: move longest test to beginning
To make sure the test that takes the longest overall time is always
started first, independent of the number of test tranches we run, we
move it to the beginning of the list. Because that test involves a lot
of waiting, it allows us to play around with the number of tranches more
efficiently.
2020-11-04 11:03:37 +01:00
Oliver Gugger e6c47294fb itest: fix typo and formatting 2020-11-04 11:03:36 +01:00