Merge pull request #4926 from guggero/doc-code-blocks

docs: unify code block formatting
2021-01-22 09:39:02 +01:00 · 2021-01-22 09:39:02 +01:00 · 39f51b5568
commit 39f51b5568
parent b20afc0679 9642012643
32 changed files with 426 additions and 453 deletions
--- a/aezeed/README.md
+++ b/aezeed/README.md
@ -13,8 +13,8 @@ user addresses. Additionally, BIP39 use a very weak [KDF](https://en.wikipedia.o
 scrypt with modern parameters (n=32768, r=8, p=1). A set of benchmarks has
 been added, on my laptop I get about 100ms per attempt):

-```bash
-⛰ go test -run=XXX -bench=.
+```shell
+⛰  go test -run=XXX -bench=.

 goos: linux
 goarch: amd64
--- a/brontide/README.md
+++ b/brontide/README.md
@ -23,6 +23,6 @@ between network enabled programs.

 ## Installation and Updating

-```bash
-$ go get -u github.com/lightningnetwork/lnd/brontide
+```shell
+⛰  go get -u github.com/lightningnetwork/lnd/brontide
 ```
--- a/chainntnfs/README.md
+++ b/chainntnfs/README.md
@ -25,6 +25,6 @@ implementation of the `ChainNotifier` interface depends on `btcd`.

 ## Installation and Updating

-```bash
-$ go get -u github.com/lightningnetwork/lnd/chainntnfs
+```shell
+⛰  go get -u github.com/lightningnetwork/lnd/chainntnfs
 ```
--- a/channeldb/README.md
+++ b/channeldb/README.md
@ -19,6 +19,6 @@ node and channel announcements, outgoing payments, and invoices

 ## Installation and Updating

-```bash
-$ go get -u github.com/lightningnetwork/lnd/channeldb
+```shell
+⛰  go get -u github.com/lightningnetwork/lnd/channeldb
 ```
--- a/docker/README.md
+++ b/docker/README.md
@ -31,7 +31,7 @@ next versions will use the started `btcd` bitcoin node in `testnet` and

 In the workflow below, we describe the steps required to recreate the following
 topology, and send a payment from `Alice` to `Bob`.
-```
+```text
 + ----- +                   + --- +
 | Alice | <--- channel ---> | Bob |  <---   Bob and Alice are the lightning network daemons which 
 + ----- +                   + --- +         create channels and interact with each other using the   
@ -59,47 +59,46 @@ topology, and send a payment from `Alice` to `Bob`.

 Start `btcd`, and then create an address for `Alice` that we'll directly mine
 bitcoin into.
-```bash
+```shell
 # Init bitcoin network env variable:
-$ export NETWORK="simnet" 
+⛰  export NETWORK="simnet" 

 # Create persistent volumes for alice and bob.
-$ docker volume create simnet_lnd_alice
-$ docker volume create simnet_lnd_bob
+⛰  docker volume create simnet_lnd_alice
+⛰  docker volume create simnet_lnd_bob

 # Run the "Alice" container and log into it:
-$ docker-compose run -d --name alice --volume simnet_lnd_alice:/root/.lnd lnd
-$ docker exec -i -t alice bash
+⛰  docker-compose run -d --name alice --volume simnet_lnd_alice:/root/.lnd lnd
+⛰  docker exec -i -t alice bash

 # Generate a new backward compatible nested p2sh address for Alice:
-alice$ lncli --network=simnet newaddress np2wkh 
+alice ⛰  lncli --network=simnet newaddress np2wkh 

 # Recreate "btcd" node and set Alice's address as mining address:
-$ MINING_ADDRESS=<alice_address> docker-compose up -d btcd
+⛰  MINING_ADDRESS=<alice_address> docker-compose up -d btcd

 # Generate 400 blocks (we need at least "100 >=" blocks because of coinbase 
 # block maturity and "300 ~=" in order to activate segwit):
-$ docker exec -it btcd /start-btcctl.sh generate 400
+⛰  docker exec -it btcd /start-btcctl.sh generate 400

 # Check that segwit is active:
-$ docker exec -it btcd /start-btcctl.sh getblockchaininfo | grep -A 1 segwit
+⛰  docker exec -it btcd /start-btcctl.sh getblockchaininfo | grep -A 1 segwit
 ```

 Check `Alice` balance:
-```
-alice$ lncli --network=simnet walletbalance
+```shell
+alice ⛰  lncli --network=simnet walletbalance
 ```

 Connect `Bob` node to `Alice` node.

-```bash
+```shell
 # Run "Bob" node and log into it:
-$ docker-compose run -d --name bob --volume simnet_lnd_bob:/root/.lnd lnd
-$ docker exec -i -t bob bash
+⛰  docker-compose run -d --name bob --volume simnet_lnd_bob:/root/.lnd lnd
+⛰  docker exec -i -t bob bash

 # Get the identity pubkey of "Bob" node:
-bob$ lncli --network=simnet getinfo
-
+bob ⛰  lncli --network=simnet getinfo
 {
    ----->"identity_pubkey": "0343bc80b914aebf8e50eb0b8e445fc79b9e6e8e5e018fa8c5f85c7d429c117b38",
    "alias": "",
@ -117,13 +116,13 @@ bob$ lncli --network=simnet getinfo
 }

 # Get the IP address of "Bob" node:
-$ docker inspect bob | grep IPAddress
+⛰  docker inspect bob | grep IPAddress

 # Connect "Alice" to the "Bob" node:
-alice$ lncli --network=simnet connect <bob_pubkey>@<bob_host>
+alice ⛰  lncli --network=simnet connect <bob_pubkey>@<bob_host>

 # Check list of peers on "Alice" side:
-alice$ lncli --network=simnet listpeers
+alice ⛰  lncli --network=simnet listpeers
 {
    "peers": [
        {
@ -140,7 +139,7 @@ alice$ lncli --network=simnet listpeers
 }

 # Check list of peers on "Bob" side:
-bob$ lncli --network=simnet listpeers
+bob ⛰  lncli --network=simnet listpeers
 {
    "peers": [
        {
@ -158,15 +157,15 @@ bob$ lncli --network=simnet listpeers
 ```

 Create the `Alice<->Bob` channel.
-```bash
+```shell
 # Open the channel with "Bob":
-alice$ lncli --network=simnet openchannel --node_key=<bob_identity_pubkey> --local_amt=1000000
+alice ⛰  lncli --network=simnet openchannel --node_key=<bob_identity_pubkey> --local_amt=1000000

 # Include funding transaction in block thereby opening the channel:
-$ docker exec -it btcd /start-btcctl.sh generate 3
+⛰  docker exec -it btcd /start-btcctl.sh generate 3

 # Check that channel with "Bob" was opened:
-alice$ lncli --network=simnet listchannels
+alice ⛰  lncli --network=simnet listchannels
 {
    "channels": [
        {
@ -193,31 +192,31 @@ alice$ lncli --network=simnet listchannels
 ```

 Send the payment from `Alice` to `Bob`.
-```bash
+```shell
 # Add invoice on "Bob" side:
-bob$ lncli --network=simnet addinvoice --amt=10000
+bob ⛰  lncli --network=simnet addinvoice --amt=10000
 {
        "r_hash": "<your_random_rhash_here>", 
        "pay_req": "<encoded_invoice>", 
 }

 # Send payment from "Alice" to "Bob":
-alice$ lncli --network=simnet sendpayment --pay_req=<encoded_invoice>
+alice ⛰  lncli --network=simnet sendpayment --pay_req=<encoded_invoice>

 # Check "Alice"'s channel balance
-alice$ lncli --network=simnet channelbalance
+alice ⛰  lncli --network=simnet channelbalance

 # Check "Bob"'s channel balance
-bob$ lncli --network=simnet channelbalance
+bob ⛰  lncli --network=simnet channelbalance
 ```

 Now we have open channel in which we sent only one payment, let's imagine
 that we sent lots of them and we'd now like to close the channel. Let's do
 it!
-```bash
+```shell
 # List the "Alice" channel and retrieve "channel_point" which represents
 # the opened channel:
-alice$ lncli --network=simnet listchannels
+alice ⛰  lncli --network=simnet listchannels
 {
    "channels": [
        {
@ -244,17 +243,17 @@ alice$ lncli --network=simnet listchannels

 # Channel point consists of two numbers separated by a colon. The first one 
 # is "funding_txid" and the second one is "output_index":
-alice$ lncli --network=simnet closechannel --funding_txid=<funding_txid> --output_index=<output_index>
+alice ⛰  lncli --network=simnet closechannel --funding_txid=<funding_txid> --output_index=<output_index>

 # Include close transaction in a block thereby closing the channel:
-$ docker exec -it btcd /start-btcctl.sh generate 3
+⛰  docker exec -it btcd /start-btcctl.sh generate 3

 # Check "Alice" on-chain balance was credited by her settled amount in the channel:
-alice$ lncli --network=simnet walletbalance
+alice ⛰  lncli --network=simnet walletbalance

 # Check "Bob" on-chain balance was credited with the funds he received in the
 # channel:
-bob$ lncli --network=simnet walletbalance
+bob ⛰  lncli --network=simnet walletbalance
 {
    "total_balance": "10000",
    "confirmed_balance": "10000",
@ -270,7 +269,7 @@ In this section we will try to connect our node to the faucet/hub node
 which we will create a channel with and send some amount of 
 bitcoins. The schema will be following:

-```
+```text
 + ----- +                   + ------ +         (1)        + --- +
 | Alice | <--- channel ---> | Faucet |  <--- channel ---> | Bob |    
 + ----- +                   + ------ +                    + --- +        
@ -297,21 +296,21 @@ bitcoins. The schema will be following:

 First of all you need to run `btcd` node in `testnet` and wait for it to be 
 synced with test network (`May the Force and Patience be with you`).
-```bash 
+```shell
 # Init bitcoin network env variable:
-$ NETWORK="testnet" docker-compose up
+⛰  NETWORK="testnet" docker-compose up
 ```

 After `btcd` synced, connect `Alice` to the `Faucet` node.

 The `Faucet` node address can be found at the [Faucet Lightning Community webpage](https://faucet.lightning.community).

-```bash 
+```shell
 # Run "Alice" container and log into it:
-$ docker-compose run -d --name alice lnd_btc; docker exec -i -t "alice" bash
+⛰  docker-compose run -d --name alice lnd_btc; docker exec -i -t "alice" bash

 # Connect "Alice" to the "Faucet" node:
-alice$ lncli --network=testnet connect <faucet_identity_address>@<faucet_host>
+alice ⛰  lncli --network=testnet connect <faucet_identity_address>@<faucet_host>
 ```

 After a connection is achieved, the `Faucet` node should create the channel
@ -332,6 +331,6 @@ production), outside of `docker-compose`, see the
 [![Irc](https://img.shields.io/badge/chat-on%20freenode-brightgreen.svg)](https://webchat.freenode.net/?channels=lnd)

 * How to see `alice` | `bob` | `btcd` logs?
-```bash
-docker-compose logs <alice|bob|btcd>
+```shell
+⛰  docker-compose logs <alice|bob|btcd>
 ```
--- a/docs/DOCKER.md
+++ b/docs/DOCKER.md
@ -12,8 +12,8 @@ There are two flavors of Dockerfiles available:
 To build a standalone development image from the local source directory, use the
 following command:

-```
-$ docker build --tag=myrepository/lnd-dev -f dev.Dockerfile .
+```shell
+⛰  docker build --tag=myrepository/lnd-dev -f dev.Dockerfile .
 ```

 There is also a `docker-compose` setup available for development or testing that
@ -28,16 +28,16 @@ Docker container, adding the appropriate command-line options as parameters.

 You first need to build the `lnd` docker image:

-```
-$ docker build --tag=myrepository/lnd --build-arg checkout=v0.11.1-beta .
+```shell
+⛰  docker build --tag=myrepository/lnd --build-arg checkout=v0.11.1-beta .
 ```

 It is recommended that you checkout the latest released tag.

 You can continue by creating and running the container:

-```
-$ docker run myrepository/lnd [command-line options]
+```shell
+⛰  docker run myrepository/lnd [command-line options]
 ```

 ## Production (official images)
@ -49,8 +49,8 @@ images of `lnd` available in the
 You can just pull those images by specifying a release tag:

 ```shell
-$ docker pull lightninglabs/lnd:v0.12.0-beta
-$ docker run lightninglabs/lnd [command-line options]
+⛰  docker pull lightninglabs/lnd:v0.12.0-beta
+⛰  docker run lightninglabs/lnd [command-line options]
 ```

 ### Verifying docker images
@ -61,11 +61,11 @@ script in the image that can be called (before starting the container for
 example):

 ```shell
-$ docker pull lightninglabs/lnd:v0.12.0-beta
-$ docker run --rm --entrypoint="" lightninglabs/lnd:v0.12.0-beta /verify-install.sh
-$ OK=$?
-$ if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
-$ docker run lightninglabs/lnd [command-line options]
+⛰  docker pull lightninglabs/lnd:v0.12.0-beta
+⛰  docker run --rm --entrypoint="" lightninglabs/lnd:v0.12.0-beta /verify-install.sh
+⛰  OK=$?
+⛰  if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
+⛰  docker run lightninglabs/lnd [command-line options]
 ```

 ## Volumes
@ -75,28 +75,28 @@ persist through container restarts.

 You can also optionally manually specify a local folder to be used as a volume:

-```
-$ docker create --name=mylndcontainer -v /media/lnd-docker/:/root/.lnd myrepository/lnd [command-line options]
+```shell
+⛰  docker create --name=mylndcontainer -v /media/lnd-docker/:/root/.lnd myrepository/lnd [command-line options]
 ```

 ## Example

 Here is an example testnet `lnd` that uses Neutrino:

-```
-$ docker run --name lnd-testnet myrepository/lnd --bitcoin.active --bitcoin.testnet --bitcoin.node=neutrino --neutrino.connect=faucet.lightning.community
+```shell
+⛰  docker run --name lnd-testnet myrepository/lnd --bitcoin.active --bitcoin.testnet --bitcoin.node=neutrino --neutrino.connect=faucet.lightning.community
 ```

 Create a wallet (and write down the seed):

-```
-$ docker exec -it lnd-testnet lncli create
+```shell
+⛰  docker exec -it lnd-testnet lncli create
 ```

 Confirm `lnd` has begun to synchronize:

-```
-$ docker logs lnd-testnet
+```shell
+⛰  docker logs lnd-testnet
 [snipped]
 2018-05-01 02:28:01.201 [INF] RPCS: RPC server listening on 127.0.0.1:10009
 2018-05-01 02:28:01.201 [INF] LTND: Waiting for chain backend to finish sync, start_height=2546
@ -113,24 +113,24 @@ to expose RPC ports, use `btcd` or `bitcoind`, or add additional chains.
 To test the Docker production image locally, run the following from
 the project root:

-```
-$ docker build . -t myrepository/lnd:master
+```shell
+⛰  docker build . -t myrepository/lnd:master
 ```

 To choose a specific branch or tag instead, use the "checkout" build-arg.  For example, to build the latest commits in master:

-```
-$ docker build . --build-arg checkout=v0.8.0-beta -t myrepository/lnd:v0.8.0-beta
+```shell
+⛰  docker build . --build-arg checkout=v0.8.0-beta -t myrepository/lnd:v0.8.0-beta
 ```

 To build the image using the most current tag:

-```
-$ docker build . --build-arg checkout=$(git describe --tags `git rev-list --tags --max-count=1`) -t myrepository/lnd:latest-tag
+```shell
+⛰  docker build . --build-arg checkout=$(git describe --tags `git rev-list --tags --max-count=1`) -t myrepository/lnd:latest-tag
 ```

 Once the image has been built and tagged locally, start the container:

-```
-docker run --name=lnd-testnet -it myrepository/lnd:latest-tag --bitcoin.active --bitcoin.testnet --bitcoin.node=neutrino --neutrino.connect=faucet.lightning.community
+```shell
+⛰  docker run --name=lnd-testnet -it myrepository/lnd:latest-tag --bitcoin.active --bitcoin.testnet --bitcoin.node=neutrino --neutrino.connect=faucet.lightning.community
 ```
--- a/docs/INSTALL.md
+++ b/docs/INSTALL.md
@ -67,10 +67,10 @@ To build a specific git tag of `lnd`, simply run the following steps (assuming
 `v0.x.y-beta` is the tagged version to build):

 ```shell
-git clone https://github.com/lightningnetwork/lnd
-cd lnd
-git checkout v0.x.y-beta
-make docker-release tag=v0.x.y-beta
+⛰  git clone https://github.com/lightningnetwork/lnd
+⛰  cd lnd
+⛰  git checkout v0.x.y-beta
+⛰  make docker-release tag=v0.x.y-beta
 ```

 This will create a directory called `lnd-v0.x.y-beta` that contains the release
@ -150,9 +150,9 @@ version if there are database migrations present.
    `~/go`. You will also need to add `$GOPATH/bin` to your `PATH`. This ensures
    that your shell will be able to detect the binaries you install.

-    ```bash
-    export GOPATH=~/gocode
-    export PATH=$PATH:$GOPATH/bin
+    ```shell
+    ⛰  export GOPATH=~/gocode
+    ⛰  export PATH=$PATH:$GOPATH/bin
    ```

    We recommend placing the above in your .bashrc or in a setup script so that
@ -169,10 +169,10 @@ version if there are database migrations present.

 With the preliminary steps completed, to install `lnd`, `lncli`, and all
 related dependencies run the following commands:
-```
-git clone https://github.com/lightningnetwork/lnd
-cd lnd
-make install
+```shell
+⛰  git clone https://github.com/lightningnetwork/lnd
+⛰  cd lnd
+⛰  make install
 ```

 The command above will install the current _master_ branch of `lnd`. If you
@ -181,11 +181,11 @@ unstable), then [visit then release page to locate the latest
 release](https://github.com/lightningnetwork/lnd/releases). Assuming the name
 of the release is `v0.x.x`, then you can compile this release from source with
 a small modification to the above command: 
-```
-git clone https://github.com/lightningnetwork/lnd
-cd lnd
-git checkout v0.x.x
-make install
+```shell
+⛰  git clone https://github.com/lightningnetwork/lnd
+⛰  cd lnd
+⛰  git checkout v0.x.x
+⛰  make install
 ```


@ -197,35 +197,35 @@ For Windows WSL users, make will need to be referenced directly via
 /usr/bin/make/, or alternatively by wrapping quotation marks around make,
 like so:

-```
-/usr/bin/make && /usr/bin/make install
+```shell
+⛰  /usr/bin/make && /usr/bin/make install

-"make" && "make" install
+⛰  "make" && "make" install
 ```

 On FreeBSD, use gmake instead of make.

 Alternatively, if one doesn't wish to use `make`, then the `go` commands can be
 used directly:
-```
-GO111MODULE=on go install -v ./...
+```shell
+⛰  GO111MODULE=on go install -v ./...
 ```

 **Updating**

 To update your version of `lnd` to the latest version run the following
 commands:
-```
-cd $GOPATH/src/github.com/lightningnetwork/lnd
-git pull
-make clean && make && make install
+```shell
+⛰  cd $GOPATH/src/github.com/lightningnetwork/lnd
+⛰  git pull
+⛰  make clean && make && make install
 ```

 On FreeBSD, use gmake instead of make.

 Alternatively, if one doesn't wish to use `make`, then the `go` commands can be
 used directly:
-```
+```shell
 cd $GOPATH/src/github.com/lightningnetwork/lnd
 git pull
 GO111MODULE=on go install -v ./...
--- a/docs/MAKEFILE.md
+++ b/docs/MAKEFILE.md
@ -3,10 +3,10 @@ Makefile

 To build, verify, and install `lnd` from source, use the following
 commands:
-```
-make
-make check
-make install
+```shell
+⛰  make
+⛰  make check
+⛰  make install
 ```

 The command `make check` requires `bitcoind` (almost any version should do) to
@ -144,7 +144,7 @@ until an error occurs. Useful for hunting flakes.

 Example:
 ```shell
-$ make flakehunter-parallel icase='(data_loss_protection|channel_backup)' backend=neutrino
+⛰  make flakehunter-parallel icase='(data_loss_protection|channel_backup)' backend=neutrino
 ```

 `lint`
--- a/docs/code_contribution_guidelines.md
+++ b/docs/code_contribution_guidelines.md
@ -1,29 +1,27 @@
-### Table of Contents
-1. [Overview](#Overview)<br />
-2. [Minimum Recommended Skillset](#MinSkillset)<br />
-3. [Required Reading](#ReqReading)<br />
-4. [Development Practices](#DevelopmentPractices)<br />
-4.1. [Share Early, Share Often](#ShareEarly)<br />
-4.2. [Testing](#Testing)<br />
-4.3. [Code Documentation and Commenting](#CodeDocumentation)<br />
-4.4. [Model Git Commit Messages](#ModelGitCommitMessages)<br />
-4.5. [Ideal Git Commit Structure](#IdealGitCommitStructure)<br />
-4.6. [Code Spacing](#CodeSpacing)<br />
-4.7. [Protobuf Compilation](#Protobuf)<br />
-4.8. [Additional Style Constraints On Top of gofmt](ExtraGoFmtStyle)<br />
-4.9. [Pointing to Remote Dependant Branches in Go Modules](ModulesReplace)<br />
-4.10. [Use of Log Levels](#LogLevels)<br />
-5. [Code Approval Process](#CodeApproval)<br />
-5.1. [Code Review](#CodeReview)<br />
-5.2. [Rework Code (if needed)](#CodeRework)<br />
-5.3. [Acceptance](#CodeAcceptance)<br />
-6. [Contribution Standards](#Standards)<br />
-6.1. [Contribution Checklist](#Checklist)<br />
-6.2. [Licensing of Contributions](#Licensing)<br />
+# Table of Contents
+1. [Overview](#overview)
+2. [Minimum Recommended Skillset](#minimum-recommended-skillset)
+3. [Required Reading](#required-reading)
+4. [Development Practices](#development-practices)
+   1. [Share Early, Share Often](#share-early-share-often)
+   1. [Testing](#testing)
+   1. [Code Documentation and Commenting](#code-documentation-and-commenting)
+   1. [Model Git Commit Messages](#model-git-commit-messages)
+   1. [Ideal Git Commit Structure](#ideal-git-commit-structure)
+   1. [Code Spacing](#code-spacing)
+   1. [Protobuf Compilation](#protobuf-compilation)
+   1. [Additional Style Constraints On Top of gofmt](#additional-style-constraints-on-top-of-gofmt)
+   1. [Pointing to Remote Dependant Branches in Go Modules](#pointing-to-remote-dependant-branches-in-go-modules)
+   1. [Use of Log Levels](#use-of-log-levels)
+5. [Code Approval Process](#code-approval-process)
+   1. [Code Review](#code-review)
+   1. [Rework Code (if needed)](#rework-code-if-needed)
+   1. [Acceptance](#acceptance)
+6. [Contribution Standards](#contribution-standards)
+   1. [Contribution Checklist](#contribution-checklist)
+   1. [Licensing of Contributions](#licensing-of-contributions)

-<a name="Overview" />
-
-### 1. Overview
+# Overview

 Developing cryptocurrencies is an exciting endeavor that touches a wide variety
 of areas such as wire protocols, peer-to-peer networking, databases,
@ -49,9 +47,7 @@ development process (heavily inspired by
 We highly encourage code contributions, however it is imperative that you adhere
 to the guidelines established on this page.

-<a name="MinSkillset" />
-
-### 2. Minimum Recommended Skillset
+# Minimum Recommended Skillset

 The following list is a set of core competencies that we recommend you possess
 before you really start attempting to contribute code to the project.  These are
@ -63,7 +59,7 @@ of low hanging fruit which can be tackled without having full competency in the
 areas mentioned below. 

 - A reasonable understanding of bitcoin at a high level (see the
-  [Required Reading](#ReqReading) section for the original white paper)
+  [Required Reading](#required-reading) section for the original white paper)
 - A reasonable understanding of the Lightning Network at a high level
 - Experience in some type of C-like language
 - An understanding of data structures and their performance implications
@ -78,9 +74,7 @@ if you wish to contribute to the cryptography code, you should have a good
 understanding of the various aspects involved with cryptography such as the
 security and performance implications.

-<a name="ReqReading" />
-
-### 3. Required Reading
+# Required Reading

 - [Effective Go](http://golang.org/doc/effective_go.html) - The entire `lnd` 
  project follows the guidelines in this document.  For your code to be accepted,
@ -103,17 +97,13 @@ Once the specification is finalized, it will be the most up-to-date
 comprehensive document explaining the Lightning Network. As a result, it will
 be recommended for newcomers to read first in order to get up to speed. 

-<a name="DevelopmentPractices" />
-
-### 4. Development Practices
+# Development Practices

 Developers are expected to work in their own trees and submit pull requests when
 they feel their feature or bug fix is ready for integration into the  master
 branch.

-<a name="ShareEarly" />
-
-#### 4.1. Share Early, Share Often
+## Share Early, Share Often

 We firmly believe in the share early, share often approach.  The basic premise
 of the approach is to announce your plans **before** you start work, and once
@ -132,9 +122,7 @@ This approach has several benefits:
 - The quicker your changes are merged to master, the less time you will need to
  spend rebasing and otherwise trying to keep up with the main code base

-<a name="Testing" />
-
-#### 4.2. Testing
+## Testing

 One of the major design goals of all of `lnd`'s packages and the daemon itself is
 to aim for a high degree of test coverage.  This is financial software so bugs
@ -168,15 +156,13 @@ A quick summary of test practices follows:
  contained within `lnd`. For example integration tests, see
  [`lnd_test.go`](https://github.com/lightningnetwork/lnd/blob/master/lnd_test.go#L181). 
 - The itest log files are automatically scanned for `[ERR]` lines. There
-  shouldn't be any of those in the logs, see [Use of Log Levels](#LogLevels).
+  shouldn't be any of those in the logs, see [Use of Log Levels](#use-of-log-levels).

 Throughout the process of contributing to `lnd`, you'll likely also be
 extensively using the commands within our `Makefile`. As a result, we recommend
 [perusing the make file documentation](https://github.com/lightningnetwork/lnd/blob/master/docs/MAKEFILE.md).

-<a name="CodeDocumentation" />
-
-#### 4.3. Code Documentation and Commenting
+## Code Documentation and Commenting

 - At a minimum every function must be commented with its intended purpose and
  any assumptions that it makes
@ -226,7 +212,7 @@ func DeriveRevocationPubkey(commitPubKey *btcec.PublicKey,
  obvious<br /><br />

 **WRONG**
-```Go
+```go
 // return err if amt is less than 546
 if amt < 546 {
 	return err
@ -244,9 +230,7 @@ if amt < 546 {
 but it was left as a magic number to show how much of a difference a good
 comment can make.

-<a name="ModelGitCommitMessages" />
-
-#### 4.4. Model Git Commit Messages
+## Model Git Commit Messages

 This project prefers to keep a clean commit history with well-formed commit
 messages.  This section illustrates a model commit message and provides a bit
@ -256,7 +240,7 @@ being provided here.

 Here’s a model Git commit message:

-```
+```text
 Short (50 chars or less) summary of changes

 More detailed explanatory text, if necessary.  Wrap it to about 72
@ -300,9 +284,7 @@ either a '+' or a ','. This prefix seems minor but can be extremely helpful in
 determining the scope of a commit at a glance, or when bug hunting to find a
 commit which introduced a bug or regression. 

-<a name="IdealGitCommitStructure" />
-
-#### 4.5. Ideal Git Commit Structure
+## Ideal Git Commit Structure

 Within the project we prefer small, contained commits for a pull request over a
 single giant commit that touches several files/packages. Ideal commits build on
@ -335,9 +317,7 @@ Examples of common patterns w.r.t commit structures within the project:
    induvidual commits that begin to intergrate the functionality within the
    codebase.

-<a name="CodeSpacing" />
-
-#### 4.6. Code Spacing 
+## Code Spacing 

 Blocks of code within `lnd` should be segmented into logical stanzas of
 operation. Such spacing makes the code easier to follow at a skim, and reduces
@ -444,9 +424,7 @@ the comment body.
   }
 ```

-<a name="Protobuf" />
-
-#### 4.7. Protobuf Compilation
+## Protobuf Compilation

 The `lnd` project uses `protobuf`, and its extension [`gRPC`](www.grpc.io) in
 several areas and as the primary RPC interface. In order to ensure uniformity
@ -464,9 +442,7 @@ otherwise the CI pipeline on Travis will fail:
 For detailed instructions on how to compile modifications to `lnd`'s `protobuf`
 definitions, check out the [lnrpc README](https://github.com/lightningnetwork/lnd/blob/master/lnrpc/README.md).

-<a name="ExtraGoFmtStyle" />
-
-#### 4.8. Additional Style Constraints On Top of `gofmt`
+## Additional Style Constraints On Top of `gofmt`

 Before a PR is submitted, the proposer should ensure that the file passes the
 set of linting scripts run by `make lint`. These include `gofmt`. In addition
@ -496,9 +472,7 @@ Note that the above guidelines don't apply to log messages. For log messages,
 committers should attempt to minimize the of number lines utilized, while still
 adhering to the 80-character column limit.

-<a name="ModulesReplace" />
-
-#### 4.9 Pointing to Remote Dependant Branches in Go Modules
+## Pointing to Remote Dependant Branches in Go Modules

 It's common that a developer may need to make a change in a dependent project
 of `lnd` such as `btcd`, `neutrino`, `btcwallet`, etc. In order to test changes
@ -506,18 +480,16 @@ with out testing infrastructure, or simply make a PR into `lnd` that will build
 without any further work, the `go.mod` and `go.sum` files will need to be
 updated. Luckily, the `go mod` command has a handy tool to do this
 automatically so developers don't need to manually edit the `go.mod` file:
-```
- go mod edit -replace=IMPORT-PATH-IN-LND@LND-VERSION=DEV-FORK-IMPORT-PATH@DEV-FORK-VERSION
+```shell
+⛰  go mod edit -replace=IMPORT-PATH-IN-LND@LND-VERSION=DEV-FORK-IMPORT-PATH@DEV-FORK-VERSION
 ```

 Here's an example replacing the `lightning-onion` version checked into `lnd` with a version in roasbeef's fork:
-```
- go mod edit -replace=github.com/lightningnetwork/lightning-onion@v0.0.0-20180605012408-ac4d9da8f1d6=github.com/roasbeef/lightning-onion@2e5ae87696046298365ab43bcd1cf3a7a1d69695
+```shell
+⛰  go mod edit -replace=github.com/lightningnetwork/lightning-onion@v0.0.0-20180605012408-ac4d9da8f1d6=github.com/roasbeef/lightning-onion@2e5ae87696046298365ab43bcd1cf3a7a1d69695
 ```

-<a name="LogLevels" />
-
-#### 4.10 Use of Log Levels
+## Use of Log Levels

 There are six log levels available: `trace`, `debug`, `info`, `warn`, `error` and `critical`.

@ -525,22 +497,18 @@ Only use `error` for internal errors that are never expected to happen during
 normal operation. No event triggered by external sources (rpc, chain backend,
 etc) should lead to an `error` log.

-<a name="CodeApproval" />
-
-### 5. Code Approval Process
+# Code Approval Process

 This section describes the code approval process that is used for code
 contributions.  This is how to get your changes into `lnd`.

-<a name="CodeReview" />
-
-#### 5.1. Code Review
+## Code Review

 All code which is submitted will need to be reviewed before inclusion into the
 master branch.  This process is performed by the project maintainers and usually
 other committers who are interested in the area you are working in as well.

-##### Code Review Timeframe
+### Code Review Timeframe

 The timeframe for a code review will vary greatly depending on factors such as
 the number of other pull requests which need to be reviewed, the size and
@ -553,14 +521,15 @@ manageable, commits.

 Keeping the above in mind, most small changes will be reviewed within a few
 days, while large or far reaching changes may take weeks.  This is a good reason
-to stick with the [Share Early, Share Often](#ShareEarly) development practice
-outlined above.
+to stick with the [Share Early, Share Often](#share-early-share-often)
+development practice outlined above.

-##### What is the review looking for?
+### What is the review looking for?

-The review is mainly ensuring the code follows the [Development Practices](#DevelopmentPractices)
-and [Code Contribution Standards](#Standards).  However, there are a few other
-checks which are generally performed as follows:
+The review is mainly ensuring the code follows the
+[Development Practices](#development-practices) and
+[Code Contribution Standards](#contribution-standards). However, there are a few
+other checks which are generally performed as follows:

 - The code is stable and has no stability or security concerns
 - The code is properly using existing APIs and generally fits well into the
@ -568,9 +537,7 @@ checks which are generally performed as follows:
 - The change is not something which is deemed inappropriate by community
  consensus

-<a name="CodeRework" />
-
-#### 5.2. Rework Code (if needed)
+## Rework Code (if needed)

 After the code review, the change will be accepted immediately if no issues are
 found.  If there are any concerns or questions, you will be provided with
@ -588,9 +555,7 @@ can set it to auto squash the fix up commits on rebase.

 This process will continue until the code is finally accepted.

-<a name="CodeAcceptance" />
-
-#### 5.3. Acceptance
+## Acceptance

 Once your code is accepted, it will be integrated with the master branch. After
 2+ (sometimes 1) LGTM's (approvals) are given on a PR, it's eligible to land in
@ -603,16 +568,13 @@ these signatures intact, we prefer using merge commits. PR proposers can use

 Rejoice as you will now be listed as a [contributor](https://github.com/lightningnetwork/lnd/graphs/contributors)!

-<a name="Standards" />
+# Contribution Standards

-### 6. Contribution Standards
-
-<a name="Checklist" />
-
-#### 6.1. Contribution Checklist
+## Contribution Checklist

 - [&nbsp;&nbsp;] All changes are Go version 1.12 compliant
- [&nbsp;&nbsp;] The code being submitted is commented according to [Code Documentation and Commenting](#CodeDocumentation)
+- [&nbsp;&nbsp;] The code being submitted is commented according to
+  [Code Documentation and Commenting](#code-documentation-and-commenting)
 - [&nbsp;&nbsp;] For new code: Code is accompanied by tests which exercise both
  the positive and negative (error paths) conditions (if applicable)
 - [&nbsp;&nbsp;] For bug fixes: Code is accompanied by new tests which trigger
@ -630,18 +592,17 @@ Rejoice as you will now be listed as a [contributor](https://github.com/lightnin
 - [&nbsp;&nbsp;] All commits build properly and pass tests. Only in exceptional
  cases it can be justifiable to violate this condition. In that case, the
  reason should be stated in the commit message.
- [&nbsp;&nbsp;] Commits have a logical structure according to [Ideal Git Commit Structure](#IdealGitCommitStructure).
+- [&nbsp;&nbsp;] Commits have a logical structure according to
+  [Ideal Git Commit Structure](#ideal-git-commit-structure).

-<a name="Licensing" />
-
-#### 6.2. Licensing of Contributions
+## Licensing of Contributions
 ****
 All contributions must be licensed with the
 [MIT license](https://github.com/lightningnetwork/lnd/blob/master/LICENSE).  This is
 the same license as all of the code found within lnd.


-## Acknowledgements
+# Acknowledgements
 This document was heavily inspired by a [similar document outlining the code
 contribution](https://github.com/btcsuite/btcd/blob/master/docs/code_contribution_guidelines.md)
 guidelines for btcd. 
--- a/docs/configuring_tor.md
+++ b/docs/configuring_tor.md
@ -37,7 +37,7 @@ First, you'll want to run `tor` locally before starting up `lnd`. Depending on
 how you installed Tor, you'll find the configuration file at
 `/usr/local/etc/tor/torrc`. Here's an example configuration file that we'll be
 using for the remainder of the tutorial:
-```
+```text
 SOCKSPort 9050
 Log notice stdout
 ControlPort 9051
@ -45,7 +45,7 @@ CookieAuthentication 1
 ```

 With the configuration file created, you'll then want to start the Tor daemon:
-```
+```shell
 ⛰  tor
 Feb 05 17:02:06.501 [notice] Tor 0.3.1.8 (git-ad5027f7dc790624) running on Darwin with Libevent 2.1.8-stable, OpenSSL 1.0.2l, Zlib 1.2.8, Liblzma N/A, and Libzstd N/A.
 Feb 05 17:02:06.502 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning
@ -55,7 +55,7 @@ Feb 05 17:02:06.506 [notice] Opening Control listener on 127.0.0.1:9051
 ```

 Once the `tor` daemon has started and it has finished bootstrapping, you'll see this in the logs:
-```
+```text
 Feb 05 17:02:06.000 [notice] Bootstrapped 0%: Starting
 Feb 05 17:02:07.000 [notice] Starting with guard context "default"
 Feb 05 17:02:07.000 [notice] Bootstrapped 80%: Connecting to the Tor network
@ -68,7 +68,7 @@ Feb 05 17:02:11.000 [notice] Bootstrapped 100%: Done
 This indicates the daemon is fully bootstrapped and ready to proxy connections.
 At this point, we can now start `lnd` with the relevant arguments:

-```
+```shell
 ⛰  ./lnd -h

 <snip>
@ -132,7 +132,7 @@ circuit.

 Activating stream isolation is very straightforward, we only require the
 specification of an additional argument:
-```
+```shell
 ⛰  ./lnd --tor.active --tor.streamisolation
 ```

@ -170,7 +170,7 @@ To prevent unintentional leaking of identifying information, it is also necessar
 to add the flag `listen=localhost`.  

 For example, v3 onion services can be used with the following flags:
-```
+```shell
 ⛰  ./lnd --tor.active --tor.v3 --listen=localhost
 ```

--- a/docs/debugging_lnd.md
+++ b/docs/debugging_lnd.md
@ -15,14 +15,14 @@ data ahead of time.
 You can enable debug logging in `lnd` by passing the `--debuglevel` flag. For
 example, to increase the log level from `info` to `debug`:

-```
-$ lnd --debuglevel=debug
+```shell
+⛰  lnd --debuglevel=debug
 ```

 You may also specify logging per-subsystem, like this:

-```
-$ lnd --debuglevel=<subsystem>=<level>,<subsystem2>=<level>,...
+```shell
+⛰  lnd --debuglevel=<subsystem>=<level>,<subsystem2>=<level>,...
 ```

 ## Capturing pprof data with `lnd`
@ -34,14 +34,14 @@ Go. The profiler has negligible performance overhead during normal operations

 To enable this ability, start `lnd` with the `--profile` option using a free port.

-```
-$ lnd --profile=9736
+```shell
+⛰  lnd --profile=9736
 ```

 Now, with `lnd` running, you can use the pprof endpoint on port 9736 to collect
 runtime profiling data. You can fetch this data using `curl` like so:

-```
-$ curl http://localhost:9736/debug/pprof/goroutine?debug=1
+```shell
+⛰  curl http://localhost:9736/debug/pprof/goroutine?debug=1
 ...
 ```
--- a/docs/etcd.md
+++ b/docs/etcd.md
@ -14,8 +14,8 @@ on bitcoin mainnet.

 To create a dev build of LND with etcd support use the following command:

-```
-make tags="kvdb_etcd"
+```shell
+⛰  make tags="kvdb_etcd"
 ```

 The important tag is the `kvdb_etcd`, without which the binary is built without
@ -29,8 +29,8 @@ directory.

 To start your local etcd instance for testing run:

-```
-./etcd \
+```shell
+⛰  ./etcd \
    --auto-tls \
    --advertise-client-urls=https://127.0.0.1:2379 \
    --listen-client-urls=https://0.0.0.0:2379 \
@ -51,8 +51,8 @@ through command line flags or in `lnd.conf`.

 Sample command line:

-```
-./lnd-debug \
+```shell
+⛰  ./lnd-debug \
    --db.backend=etcd \
    --db.etcd.host=127.0.0.1:2379 \
    --db.etcd.certfile=/home/user/etcd/bin/default.etcd/fixtures/client/cert.pem \
@ -62,7 +62,7 @@ Sample command line:

 Sample `lnd.conf` (with other setting omitted):

-```
+```text
 [db]
 backend=etcd
 etcd.host=127.0.0.1:2379
--- a/docs/fuzz.md
+++ b/docs/fuzz.md
@ -6,24 +6,24 @@ The `fuzz` package is organized into subpackages which are named after the `lnd`
 This section will cover setup and installation of `go-fuzz` and fuzzing binaries.

 * First, we must get `go-fuzz`.
-```
-$ go get -u github.com/dvyukov/go-fuzz/...
+```shell
+⛰  go get -u github.com/dvyukov/go-fuzz/...
 ```
 * The following is a command to build all fuzzing harnesses for a specific package.
-```
-$ cd fuzz/<package>
-$ find * -maxdepth 1 -regex '[A-Za-z0-9\-_.]'* -not -name fuzz_utils.go | sed 's/\.go$//1' | xargs -I % sh -c 'go-fuzz-build -func Fuzz_% -o <package>-%-fuzz.zip github.com/lightningnetwork/lnd/fuzz/<package>'
+```shell
+⛰  cd fuzz/<package>
+⛰  find * -maxdepth 1 -regex '[A-Za-z0-9\-_.]'* -not -name fuzz_utils.go | sed 's/\.go$//1' | xargs -I % sh -c 'go-fuzz-build -func Fuzz_% -o <package>-%-fuzz.zip github.com/lightningnetwork/lnd/fuzz/<package>'
 ```

 * This may take a while since this will create zip files associated with each fuzzing target.

 * Now, run `go-fuzz` with `workdir` set as below!
-```
-$ go-fuzz -bin=<.zip archive here> -workdir=<harness> -procs=<num workers>
+```shell
+⛰  go-fuzz -bin=<.zip archive here> -workdir=<harness> -procs=<num workers>
 ```

 `go-fuzz` will print out log lines every couple of seconds. Example output:
-```
+```text
 2017/09/19 17:44:23 workers: 8, corpus: 23 (3s ago), crashers: 1, restarts: 1/748, execs: 400690 (16694/sec), cover: 394, uptime: 24s
 ```
 Corpus is the number of items in the corpus. `go-fuzz` may add valid inputs to
@ -41,7 +41,7 @@ Fuzzing generally works best with a corpus that is of minimal size while achievi

 ### Test Harness ###
 If you take a look at the test harnesses that are used, you will see that they all consist of one function: 
-```
+```go
 func Fuzz(data []byte) int
 ```
 If:
--- a/docs/grpc/c#.md
+++ b/docs/grpc/c#.md
@ -21,22 +21,22 @@ Create a new `.net core` console application called `lndclient` at your root dir

 Create a folder `Grpc` in the root of your project and fetch the lnd proto files

-```bash
-mkdir Grpc
-curl -o Grpc/rpc.proto -s https://raw.githubusercontent.com/lightningnetwork/lnd/master/lnrpc/rpc.proto
+```shell
+⛰  mkdir Grpc
+⛰  curl -o Grpc/rpc.proto -s https://raw.githubusercontent.com/lightningnetwork/lnd/master/lnrpc/rpc.proto
 ```

 Install `Grpc.Tools`, `Google.Protobuf`, `Grpc.Core` using NuGet or manually with `dotnet add`:

-```bash
-dotnet add package Grpc.Tools
-dotnet add package Google.Protobuf
-dotnet add package Grpc.Core
+```shell
+⛰  dotnet add package Grpc.Tools
+⛰  dotnet add package Google.Protobuf
+⛰  dotnet add package Grpc.Core
 ```

 Add the `rpc.proto` file to the `.csproj` file in an ItemGroup. (In Visual Studio you can do this by unloading the project, editing the `.csproj` file and then reloading it)

-```
+```xml
 <ItemGroup>
   <Protobuf Include="Grpc\rpc.proto" GrpcServices="Client" />
 </ItemGroup>
@ -48,8 +48,7 @@ You're done! Build the project and verify that it works.

 Use the code below to set up a channel and client to connect to your `lnd` node:

-```c#
-
+```cs
 using System.Collections.Generic;
 using System.IO;
 using System.Threading.Tasks;
@ -69,7 +68,6 @@ var cert = File.ReadAllText(<Tls_Cert_Location>);
 var sslCreds = new SslCredentials(cert);
 var channel = new Grpc.Core.Channel("localhost:10009", sslCreds);
 var client = new Lnrpc.Lightning.LightningClient(channel);
-
 ```

 ### Examples
@ -78,7 +76,7 @@ Let's walk through some examples of C# `gRPC` clients. These examples assume tha

 #### Simple RPC

-```c#
+```cs
 // Retrieve and display the wallet balance
 // Use "WalletBalanceAsync" if in async context
 var response = client.WalletBalance(new WalletBalanceRequest());
@ -87,7 +85,7 @@ Console.WriteLine(response);

 #### Response-streaming RPC

-```c#
+```cs
 var request = new InvoiceSubscription();
 using (var call = client.SubscribeInvoices(request))
 {
@ -100,20 +98,20 @@ using (var call = client.SubscribeInvoices(request))
 ```

 Now, create an invoice for your node at `localhost:10009` and send a payment to it from another node.
-```bash
-$ lncli addinvoice --amt=100
+```shell
+⛰  lncli addinvoice --amt=100
 {
    "r_hash": <R_HASH>,
    "pay_req": <PAY_REQ>
 }
-$ lncli sendpayment --pay_req=<PAY_REQ>
+⛰  lncli sendpayment --pay_req=<PAY_REQ>
 ```

 Your console should now display the details of the recently satisfied invoice.

 #### Bidirectional-streaming RPC

-```c#
+```cs
 using (var call = client.SendPayment())
 {
    var responseReaderTask = Task.Run(async () =>
@ -155,7 +153,7 @@ This example will send a payment of 100 satoshis every 2 seconds.

 To authenticate using macaroons you need to include the macaroon in the metadata of the request.

-```c#
+```cs
 // Lnd admin macaroon is at <LND_DIR>/data/chain/bitcoin/simnet/admin.macaroon on Windows
 // ~/.lnd/data/chain/bitcoin/simnet/admin.macaroon on Linux and ~/Library/Application Support/Lnd/data/chain/bitcoin/simnet/admin.macaroon on Mac
 byte[] macaroonBytes = File.ReadAllBytes("<LND_DIR>/data/chain/bitcoin/simnet/admin.macaroon");
@ -164,13 +162,13 @@ var macaroon = BitConverter.ToString(macaroonBytes).Replace("-", ""); // hex for

 The simplest approach to use the macaroon is to include the metadata in each request as shown below.

-```c#
+```cs
 client.GetInfo(new GetInfoRequest(), new Metadata() { new Metadata.Entry("macaroon", macaroon) });
 ```

 However, this can get tiresome to do for each request, so to avoid explicitly including the macaroon we can update the credentials to include it automatically.

-```c#
+```cs
 // build ssl credentials using the cert the same as before
 var sslCreds = new SslCredentials(cert);

--- a/docs/grpc/java.md
+++ b/docs/grpc/java.md
@ -11,7 +11,7 @@ with lnd in Java. We'll be using Maven as our build tool.

 ### Setup and Installation
 #### Project Structure
-```
+```text
 .
 ├── pom.xml
 └── src
@ -34,13 +34,13 @@ Note the ***proto*** folder, where all the proto files are kept.
 - [http.proto](https://github.com/grpc-ecosystem/grpc-gateway/blob/master/third_party/googleapis/google/api/http.proto)

 #### pom.xml
-```
+```xml
 <properties>
    <grpc.version>1.8.0</grpc.version>
 </properties>    
 ```
 The following dependencies are required.
-```
+```xml
 <dependencies>
    <dependency>
        <groupId>io.grpc</groupId>
@ -70,7 +70,7 @@ The following dependencies are required.
 </dependencies>
 ```
 In the build section,  we'll need to configure the following things :
-```
+```xml
 <build>
    <extensions>
        <extension>
@ -184,11 +184,11 @@ public class Main {
 ```
 #### Running the example
 Execute the following command in the directory where the **pom.xml** file is located.
-```
-mvn compile exec:java -Dexec.mainClass="Main" -Dexec.cleanupDaemonThreads=false
+```shell
+⛰  mvn compile exec:java -Dexec.mainClass="Main" -Dexec.cleanupDaemonThreads=false
 ```
 ##### Sample output
-```
+```text
 [INFO] Scanning for projects...
 [INFO] ------------------------------------------------------------------------
 [INFO] Detecting the operating system and CPU architecture
--- a/docs/grpc/javascript.md
+++ b/docs/grpc/javascript.md
@ -121,7 +121,7 @@ invoice.

 This example has a few dependencies:
 ```shell
-npm install --save async lodash bytebuffer
+⛰  npm install --save async lodash bytebuffer
 ```

 You can run the following in your shell or put it in a program and run it like
--- a/docs/grpc/python.md
+++ b/docs/grpc/python.md
@ -10,32 +10,32 @@ based on protocol buffers and as such, you will need to compile the lnd proto
 file in Python before you can use it to communicate with lnd.

 1. Create a virtual environment for your project
-    ```
-    $ virtualenv lnd
+    ```shell
+    ⛰  virtualenv lnd
    ```
 2. Activate the virtual environment
-    ```
-    $ source lnd/bin/activate
+    ```shell
+    ⛰  source lnd/bin/activate
    ```
 3. Install dependencies (googleapis-common-protos is required due to the use of
  google/api/annotations.proto)
-    ```
-    (lnd)$ pip install grpcio grpcio-tools googleapis-common-protos
+    ```shell
+    lnd ⛰  pip install grpcio grpcio-tools googleapis-common-protos
    ```
 4. Clone the google api's repository (required due to the use of
  google/api/annotations.proto)
-    ```
-    (lnd)$ git clone https://github.com/googleapis/googleapis.git
+    ```shell
+    lnd ⛰  git clone https://github.com/googleapis/googleapis.git
    ```
 5. Copy the lnd rpc.proto file (you'll find this at
  [lnrpc/rpc.proto](https://github.com/lightningnetwork/lnd/blob/master/lnrpc/rpc.proto))
  or just download it
-    ```
-    (lnd)$ curl -o rpc.proto -s https://raw.githubusercontent.com/lightningnetwork/lnd/master/lnrpc/rpc.proto
+    ```shell
+    lnd ⛰  curl -o rpc.proto -s https://raw.githubusercontent.com/lightningnetwork/lnd/master/lnrpc/rpc.proto
    ```
 6. Compile the proto file
-    ```
-    (lnd)$ python -m grpc_tools.protoc --proto_path=googleapis:. --python_out=. --grpc_python_out=. rpc.proto
+    ```shell
+    lnd ⛰  python -m grpc_tools.protoc --proto_path=googleapis:. --python_out=. --grpc_python_out=. rpc.proto
    ```

 After following these steps, two files `rpc_pb2.py` and `rpc_pb2_grpc.py` will
@ -52,9 +52,9 @@ For example, if you want to generate the RPC modules for the `Router` subserver
 extra steps (after completing all 6 step described above) to get the
 `router_pb2.py` and `router_pb2_grpc.py`:

-```
-(lnd)$ curl -o router.proto -s https://raw.githubusercontent.com/lightningnetwork/lnd/master/lnrpc/routerrpc/router.proto
-(lnd)$ python -m grpc_tools.protoc --proto_path=googleapis:. --python_out=. --grpc_python_out=. router.proto
+```shell
+lnd ⛰  curl -o router.proto -s https://raw.githubusercontent.com/lightningnetwork/lnd/master/lnrpc/routerrpc/router.proto
+lnd ⛰  python -m grpc_tools.protoc --proto_path=googleapis:. --python_out=. --grpc_python_out=. router.proto
 ```

 ### Imports and Client
@ -105,13 +105,13 @@ for invoice in stub.SubscribeInvoices(request):

 Now, create an invoice for your node at `localhost:10009`and send a payment to
 it from another node.
-```bash
-$ lncli addinvoice --amt=100
+```shell
+lnd ⛰  lncli addinvoice --amt=100
 {
 	"r_hash": <R_HASH>,
 	"pay_req": <PAY_REQ>
 }
-$ lncli sendpayment --pay_req=<PAY_REQ>
+lnd ⛰  lncli sendpayment --pay_req=<PAY_REQ>
 ```

 Your Python console should now display the details of the recently satisfied
--- a/docs/grpc/ruby.md
+++ b/docs/grpc/ruby.md
@ -14,27 +14,27 @@ the `lnd` proto file in Ruby before you can use it to communicate with `lnd`.

 Install gRPC rubygems:

-```
-$ gem install grpc
-$ gem install grpc-tools
+```shell
+⛰  gem install grpc
+⛰  gem install grpc-tools
 ```

 Clone the Google APIs repository:

-```
-$ git clone https://github.com/googleapis/googleapis.git
+```shell
+⛰  git clone https://github.com/googleapis/googleapis.git
 ```

 Fetch the `rpc.proto` file (or copy it from your local source directory):

-```
-$ curl -o rpc.proto -s https://raw.githubusercontent.com/lightningnetwork/lnd/master/lnrpc/rpc.proto
+```shell
+⛰  curl -o rpc.proto -s https://raw.githubusercontent.com/lightningnetwork/lnd/master/lnrpc/rpc.proto
 ```

 Compile the proto file:

-```
-$ grpc_tools_ruby_protoc --proto_path googleapis:. --ruby_out=. --grpc_out=. rpc.proto
+```shell
+⛰  grpc_tools_ruby_protoc --proto_path googleapis:. --ruby_out=. --grpc_out=. rpc.proto
 ```

 Two files will be generated in the current directory: 
@ -98,8 +98,8 @@ end

 Now, create an invoice on your node:

-```bash
-$ lncli addinvoice --amt=590
+```shell
+⛰  lncli addinvoice --amt=590
 {
 	"r_hash": <R_HASH>,
 	"pay_req": <PAY_REQ>
@ -108,8 +108,8 @@ $ lncli addinvoice --amt=590

 Next send a payment to it from another node:

-```
-$ lncli sendpayment --pay_req=<PAY_REQ>
+```shell
+⛰  lncli sendpayment --pay_req=<PAY_REQ>
 ```

 You should now see the details of the settled invoice appear.
--- a/docs/macaroons.md
+++ b/docs/macaroons.md
@ -146,11 +146,17 @@ To avoid leaking the macaroon information, `lnd` supports the so called
 Examples:

 * Create a new wallet stateless (first run):
-  * `lncli create --stateless_init --save_to=/safe/location/admin.macaroon`
+  ```shell
+    ⛰  lncli create --stateless_init --save_to=/safe/location/admin.macaroon
+  ```
 * Unlock a wallet that has previously been initialized stateless:
-  * `lncli unlock --stateless_init`
+  ```shell
+    ⛰  lncli unlock --stateless_init
+  ```
 * Use the created macaroon:
-  * `lncli --macaroonpath=/safe/location/admin.macaroon getinfo`
+  ```shell
+    ⛰  lncli --macaroonpath=/safe/location/admin.macaroon getinfo
+  ```

 ## Using Macaroons with GRPC clients

@ -158,14 +164,18 @@ When interacting with `lnd` using the GRPC interface, the macaroons are encoded
 as a hex string over the wire and can be passed to `lnd` by specifying the
 hex-encoded macaroon as GRPC metadata:

-    GET https://localhost:8080/v1/getinfo
-    Grpc-Metadata-macaroon: <macaroon>
+```text
+GET https://localhost:8080/v1/getinfo
+Grpc-Metadata-macaroon: <macaroon>
+```

 Where `<macaroon>` is the hex encoded binary data from the macaroon file itself.

 A very simple example using `curl` may look something like this:

-    curl --insecure --header "Grpc-Metadata-macaroon: $(xxd -ps -u -c 1000  $HOME/.lnd/data/chain/bitcoin/simnet/admin.macaroon)" https://localhost:8080/v1/getinfo
+```shell
+⛰  curl --insecure --header "Grpc-Metadata-macaroon: $(xxd -ps -u -c 1000  $HOME/.lnd/data/chain/bitcoin/simnet/admin.macaroon)" https://localhost:8080/v1/getinfo
+```

 Have a look at the [Java GRPC example](/docs/grpc/java.md) for programmatic usage details.

--- a/docs/nat_traversal.md
+++ b/docs/nat_traversal.md
@ -5,7 +5,7 @@ the time of writing this documentation, UPnP and NAT-PMP are supported. NAT
 traversal can be enabled through `lnd`'s `--nat` flag.

 ```shell
-$ lnd ... --nat
+⛰  lnd ... --nat
 ```

 On startup, `lnd` will try the different techniques until one is found that's
--- a/docs/psbt.md
+++ b/docs/psbt.md
@ -25,9 +25,8 @@ amounts to be in satoshis instead of fractions of a bitcoin.
 Let's start with a very simple example and assume we want to send half a coin
 to the address `bcrt1qjrdns4f5zwkv29ln86plqzs092yd5fg6nsz8re`:

-```shell script
-$ lncli wallet psbt fund --outputs='{"bcrt1qjrdns4f5zwkv29ln86plqzs092yd5fg6nsz8re":50000000}'
-
+```shell
+⛰  lncli wallet psbt fund --outputs='{"bcrt1qjrdns4f5zwkv29ln86plqzs092yd5fg6nsz8re":50000000}'
 {
        "psbt": "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",
        "change_output_index": 0,
@ -51,8 +50,8 @@ If we inspect the PSBT that was created, we see that the locked input was indeed
 selected, the UTXO information was attached and a change output (at index 0) was
 created as well:

-```shell script
-$ bitcoin-cli decodepsbt 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
+```shell
+⛰  bitcoin-cli decodepsbt 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
 {
  "tx": {
    "txid": "33a316d62ddf74656967754d26ea83a3cb89e03ae44578d965156d4b71b1fce7",
@ -132,9 +131,8 @@ manually.
 The first step is to look at all available UTXOs and choose. To do so, we use
 the `listunspent` command:

-```shell script
-$ lncli listunspent
-
+```shell
+⛰  lncli listunspent
 {
        "utxos": [
                {
@ -160,10 +158,9 @@ $ lncli listunspent

 Next, we choose these two inputs and create the PSBT:

-```shell script
-$ lncli wallet psbt fund --outputs='{"bcrt1qjrdns4f5zwkv29ln86plqzs092yd5fg6nsz8re":50000000}' \
+```shell
+⛰  lncli wallet psbt fund --outputs='{"bcrt1qjrdns4f5zwkv29ln86plqzs092yd5fg6nsz8re":50000000}' \
    --inputs='["3597b451ff56bc901eb806e8c644a004e934b4c208679756b4cddc455c768c48:1","f8efa583e93ab71debe62a5374f91563aa10a3461518042aaddb464b656350e2:1"]'
-
 {
        "psbt": "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",
        "change_output_index": 1,
@ -185,9 +182,8 @@ $ lncli wallet psbt fund --outputs='{"bcrt1qjrdns4f5zwkv29ln86plqzs092yd5fg6nsz8
 Inspecting this PSBT, we notice that the two inputs were chosen and a large
 change change output was added at index 1:

-```shell script
-$ bitcoin-cli  decodepsbt 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
-
+```shell
+⛰  bitcoin-cli  decodepsbt cHNidP8BAJoCAAAAAkiMdlxF3M20VpdnCMK0NOkEoETG6Aa4HpC8Vv9RtJc1AQAAAAAAAAAA4lBjZUtG260qBBgVRqMQqmMV+XRTKubrHbc66YOl7/gBAAAAAAAAAAACgPD6AgAAAAAWABSQ2zhVNBOsxRfzPoPwCg8qiNolGtIkCAcAAAAAFgAUuvRP5r7qAvj0egDxyX9/FH+vukgAAAAAAAEA3gIAAAAAAQEr9IZcho/gV/6fH8C8P+yhNRZP+l3YuxsyatdYcS0S6AEAAAAA/v///wLI/8+yAAAAABYAFDXoRFwgXNO5VVtVq2WpaENh6blAAOH1BQAAAAAWABTcAR0NeNdDHb96kMnH5EVUcr1YwwJHMEQCIDqugtYLp4ebJAZvOdieshLi1lLuPl2tHQG4jM4ybwEGAiBeMpCkbHBmzYvljxb1JBQyVAMuoco0xIfi+5OQdHuXaAEhAnH96NhTW09X0npE983YBsHUoMPI4U4xBtHenpZVTEqpVwAAAAEBHwDh9QUAAAAAFgAU3AEdDXjXQx2/epDJx+RFVHK9WMMBAwQBAAAAAAEA6wIAAAAAAQFvGpeAR/0OXNyqo0zrXSzmkvVfbnytrr4onbZ61vscBwEAAAAAAAAAAAIAJPQAAAAAACIAILtTVbSIkaFDqjsJ7EOHmTfpXq/fbnrGkD3/GYHYHJtMVl0NBAAAAAAWABQqnZOHOGzDIzZAeXK+YwHq1AHtXQJIMEUCIQDgx3xEhlioV1Q+yAPKiaXMwkv1snoejbckZOKFe0R6WAIgB41dEvK3zxI665YVWfcih0IThTkPoOiMgd6xGaKQXbwBIQMdgXMwQDF+Z+r3x5JKdm1TBvXDuYC0cbrnLyqJEU2ciQAAAAABAR9WXQ0EAAAAABYAFCqdk4c4bMMjNkB5cr5jAerUAe1dAQMEAQAAAAAAAA==
 {
 "tx": {
  "txid": "e62356b99c3097eaa1241ff8e39b996917e66b13e4c0ccba3698982d746c3b76",
@ -263,9 +259,8 @@ $ bitcoin-cli  decodepsbt cHNidP8BAJoCAAAAAkiMdlxF3M20VpdnCMK0NOkEoETG6Aa4HpC8Vv
 Assuming we now want to sign the transaction that we created in the previous
 example, we simply pass it to the `finalize` sub command of the wallet:

-```shell script
-$ lncli wallet psbt finalize 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
-
+```shell
+⛰  lncli wallet psbt finalize 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
 {
      "psbt": "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",
      "final_tx": "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"
@ -318,9 +313,8 @@ The new `--psbt` flag in the `openchannel` command starts an interactive dialog
 between `lncli` and the user. Below the command you see an example output from
 a regtest setup. Of course all values will be different.

-```shell script
-$ lncli openchannel --node_key 03db1e56e5f76bc4018cf6f03d1bb98a7ae96e3f18535e929034f85e7f1ca2b8ac --local_amt 1234567 --psbt
-
+```shell
+⛰  lncli openchannel --node_key 03db1e56e5f76bc4018cf6f03d1bb98a7ae96e3f18535e929034f85e7f1ca2b8ac --local_amt 1234567 --psbt
 Starting PSBT funding flow with pending channel ID fc7853889a04d33b8115bd79ebc99c5eea80d894a0bead40fae5a06bcbdccd3d.
 PSBT funding initiated with peer 03db1e56e5f76bc4018cf6f03d1bb98a7ae96e3f18535e929034f85e7f1ca2b8ac.
 Please create a PSBT that sends 0.01234567 BTC (1234567 satoshi) to the funding address bcrt1qh33ghvgjj3ef625nl9jxz6nnrz2z9e65vsdey7w5msrklgr6rc0sv0s08q.
@ -347,9 +341,8 @@ The output of the last command already gave us an example command to use with
 something like "bitcoind, give me a PSBT that sends the given amount to the
 given address, choose any input you see fit":

-```shell script
-$ bitcoin-cli walletcreatefundedpsbt [] '[{"bcrt1qh33ghvgjj3ef625nl9jxz6nnrz2z9e65vsdey7w5msrklgr6rc0sv0s08q":0.01234567}]'
-
+```shell
+⛰  bitcoin-cli walletcreatefundedpsbt [] '[{"bcrt1qh33ghvgjj3ef625nl9jxz6nnrz2z9e65vsdey7w5msrklgr6rc0sv0s08q":0.01234567}]'
 {
  "psbt": "cHNidP8BAH0CAAAAAbxLLf9+AYfqfF69QAQuETnL6cas7GDiWBZF+3xxc/Y/AAAAAAD+////AofWEgAAAAAAIgAgvGKLsRKUcp0qk/lkYWpzGJQi51RkG5J51NwHb6B6Hh+1If0jAQAAABYAFL+6THEGhybJnOkFGSRFbtCcPOG8AAAAAAABAR8wBBAkAQAAABYAFHemJ11XF7CU7WXBIJLD/qZF+6jrAAAA",
  "fee": 0.00003060,
@ -365,9 +358,8 @@ in fees. Fee estimation/calculation can be changed with parameters of the
 If we want to know what exactly is in this PSBT, we can look at it with the
 `decodepsbt` command:

-```shell script
-$ bitcoin-cli decodepsbt cHNidP8BAH0CAAAAAbxLLf9+AYfqfF69QAQuETnL6cas7GDiWBZF+3xxc/Y/AAAAAAD+////AofWEgAAAAAAIgAgvGKLsRKUcp0qk/lkYWpzGJQi51RkG5J51NwHb6B6Hh+1If0jAQAAABYAFL+6THEGhybJnOkFGSRFbtCcPOG8AAAAAAABAR8wBBAkAQAAABYAFHemJ11XF7CU7WXBIJLD/qZF+6jrAAAA
-
+```shell
+⛰  bitcoin-cli decodepsbt cHNidP8BAH0CAAAAAbxLLf9+AYfqfF69QAQuETnL6cas7GDiWBZF+3xxc/Y/AAAAAAD+////AofWEgAAAAAAIgAgvGKLsRKUcp0qk/lkYWpzGJQi51RkG5J51NwHb6B6Hh+1If0jAQAAABYAFL+6THEGhybJnOkFGSRFbtCcPOG8AAAAAAABAR8wBBAkAQAAABYAFHemJ11XF7CU7WXBIJLD/qZF+6jrAAAA
 {
  "tx": {
    "txid": "374504e4246a93a45b4a2c2bc31d8adc8525aa101c7b9065db6dc01c4bdfce0a",
@ -454,9 +446,8 @@ a secondary, hardened and firewalled `lnd` instance has the corresponding
 private keys. On the watching only mode, the following command can be used to
 create the funding PSBT:

-```shell script
-$ lncli wallet psbt fund --outputs='{"bcrt1qh33ghvgjj3ef625nl9jxz6nnrz2z9e65vsdey7w5msrklgr6rc0sv0s08q":1234567}'
-
+```shell
+⛰  lncli wallet psbt fund --outputs='{"bcrt1qh33ghvgjj3ef625nl9jxz6nnrz2z9e65vsdey7w5msrklgr6rc0sv0s08q":1234567}'
 {
        "psbt": "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",
        "change_output_index": 1,
@ -476,7 +467,7 @@ Now that we have a valid PSBT that has everything but the final
 signatures/witness data, we can paste it into the prompt in `lncli` that is
 still waiting for our input.

-```shell script
+```shell
 ...
 Base64 encoded PSBT: cHNidP8BAH0CAAAAAbxLLf9+AYfqfF69QAQuETnL6cas7GDiWBZF+3xxc/Y/AAAAAAD+////AofWEgAAAAAAIgAgvGKLsRKUcp0qk/lkYWpzGJQi51RkG5J51NwHb6B6Hh+1If0jAQAAABYAFL+6THEGhybJnOkFGSRFbtCcPOG8AAAAAAABAR8wBBAkAQAAABYAFHemJ11XF7CU7WXBIJLD/qZF+6jrAAAA

@ -493,9 +484,8 @@ perhaps `bitcoind` would only know the public keys and couldn't sign for the
 transaction itself. Again, this is only an example and can't reflect all
 real-world use cases.

-```shell script
-$ bitcoin-cli walletprocesspsbt cHNidP8BAH0CAAAAAbxLLf9+AYfqfF69QAQuETnL6cas7GDiWBZF+3xxc/Y/AAAAAAD+////AofWEgAAAAAAIgAgvGKLsRKUcp0qk/lkYWpzGJQi51RkG5J51NwHb6B6Hh+1If0jAQAAABYAFL+6THEGhybJnOkFGSRFbtCcPOG8AAAAAAABAR8wBBAkAQAAABYAFHemJ11XF7CU7WXBIJLD/qZF+6jrAAAA
-
+```shell
+⛰  bitcoin-cli walletprocesspsbt cHNidP8BAH0CAAAAAbxLLf9+AYfqfF69QAQuETnL6cas7GDiWBZF+3xxc/Y/AAAAAAD+////AofWEgAAAAAAIgAgvGKLsRKUcp0qk/lkYWpzGJQi51RkG5J51NwHb6B6Hh+1If0jAQAAABYAFL+6THEGhybJnOkFGSRFbtCcPOG8AAAAAAABAR8wBBAkAQAAABYAFHemJ11XF7CU7WXBIJLD/qZF+6jrAAAA
 {
 "psbt": "cHNidP8BAH0CAAAAAbxLLf9+AYfqfF69QAQuETnL6cas7GDiWBZF+3xxc/Y/AAAAAAD+////AofWEgAAAAAAIgAgvGKLsRKUcp0qk/lkYWpzGJQi51RkG5J51NwHb6B6Hh+1If0jAQAAABYAFL+6THEGhybJnOkFGSRFbtCcPOG8AAAAAAABAR8wBBAkAQAAABYAFHemJ11XF7CU7WXBIJLD/qZF+6jrAQhrAkcwRAIgHKQbenZYvgADRd9TKGVO36NnaIgW3S12OUg8XGtSrE8CICmeaYoJ/U7Ecm+/GneY8i2hu2QCaQnuomJgzn+JAnrDASEDUBmCLcsybA5qXSRBBdZ0Uk/FQiay9NgOpv4D26yeJpAAAAA=",
 "complete": true
@ -506,9 +496,8 @@ If you are using the two `lnd` node model as described in
 [2b](#2b-use-lnd-to-create-a-funding-transaction), you can achieve the same
 result with the following command:

-```shell script
-$ lncli wallet psbt finalize 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
-
+```shell
+⛰  lncli wallet psbt finalize 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
 {
        "psbt": "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",
        "final_tx": "02000000000101488c765c45dccdb456976708c2b434e904a044c6e806b81e90bc56ff51b497350100000000ffffffff0287d6120000000000220020bc628bb11294729d2a93f964616a73189422e754641b9279d4dc076fa07a1e1f97ece20500000000160014d8a0381e846c22d18be12f96fe2bdb2271eb73710247304402205373b0edc2e42ab83c0497b45349fda852cf8b3a84cd8d09b63565a56384935e02203ff800535f83034434dd8ba0eb340bab8782de2c93cacda191be54c1b3382fc701210283b3c37c613fb9446d6b9fd1e3656ca3a40a99502060c8635a55c436413fc7e400000000"
@ -526,7 +515,7 @@ LOST**!

 Let's give it to `lncli` to continue:

-```shell script
+```shell
 ...
 Base64 encoded PSBT: cHNidP8BAH0CAAAAAbxLLf9+AYfqfF69QAQuETnL6cas7GDiWBZF+3xxc/Y/AAAAAAD+////AofWEgAAAAAAIgAgvGKLsRKUcp0qk/lkYWpzGJQi51RkG5J51NwHb6B6Hh+1If0jAQAAABYAFL+6THEGhybJnOkFGSRFbtCcPOG8AAAAAAABAR8wBBAkAQAAABYAFHemJ11XF7CU7WXBIJLD/qZF+6jrAQhrAkcwRAIgHKQbenZYvgADRd9TKGVO36NnaIgW3S12OUg8XGtSrE8CICmeaYoJ/U7Ecm+/GneY8i2hu2QCaQnuomJgzn+JAnrDASEDUBmCLcsybA5qXSRBBdZ0Uk/FQiay9NgOpv4D26yeJpAAAAA=
 {
@ -550,18 +539,18 @@ However, the `bitcoin-cli` examples from the command line can be combined into
 a single command. For example:

 Channel 1:
-```shell script
-$ bitcoin-cli walletcreatefundedpsbt [] '[{"tb1qywvazres587w9wyy8uw03q8j9ek6gc9crwx4jvhqcmew4xzsvqcq3jjdja":0.01000000}]'
+```shell
+⛰  bitcoin-cli walletcreatefundedpsbt [] '[{"tb1qywvazres587w9wyy8uw03q8j9ek6gc9crwx4jvhqcmew4xzsvqcq3jjdja":0.01000000}]'
 ```

 Channel 2:
-```shell script
-$ bitcoin-cli walletcreatefundedpsbt [] '[{"tb1q53626fcwwtcdc942zaf4laqnr3vg5gv4g0hakd2h7fw2pmz6428sk3ezcx":0.01000000}]'
+```shell
+⛰  bitcoin-cli walletcreatefundedpsbt [] '[{"tb1q53626fcwwtcdc942zaf4laqnr3vg5gv4g0hakd2h7fw2pmz6428sk3ezcx":0.01000000}]'
 ```

 Combined command to get batch PSBT:
-```shell script
-$ bitcoin-cli walletcreatefundedpsbt [] '[{"tb1q53626fcwwtcdc942zaf4laqnr3vg5gv4g0hakd2h7fw2pmz6428sk3ezcx":0.01000000},{"tb1qywvazres587w9wyy8uw03q8j9ek6gc9crwx4jvhqcmew4xzsvqcq3jjdja":0.01000000}]'
+```shell
+⛰  bitcoin-cli walletcreatefundedpsbt [] '[{"tb1q53626fcwwtcdc942zaf4laqnr3vg5gv4g0hakd2h7fw2pmz6428sk3ezcx":0.01000000},{"tb1qywvazres587w9wyy8uw03q8j9ek6gc9crwx4jvhqcmew4xzsvqcq3jjdja":0.01000000}]'
 ```

 ### Safety warning about batch transactions
--- a/docs/recovery.md
+++ b/docs/recovery.md
@ -43,7 +43,7 @@ When a new `lnd` node is created, it's given a 24-word seed phrase, called an
 The two seed formats look similar, but the only commonality they share are
 using the same default English dictionary. A valid seed phrase obtained over
 the CLI `lncli create` command looks something like: 
-```
+```text
 !!!YOU MUST WRITE DOWN THIS SEED TO BE ABLE TO RESTORE THE WALLET!!!

 ---------------BEGIN LND CIPHER SEED---------------
@ -62,7 +62,7 @@ the CLI `lncli create` command looks something like:

 During the creation process, users are first prompted to enter a **wallet
 password**:
-```
+```text
 Input wallet password:
 Confirm wallet password:
 ```
@ -72,7 +72,7 @@ derived master private keys or public key data.

 Users can also _optionally_ enter a second passphrase which we call the _cipher
 seed passphrase_:
-```
+```text
 Your cipher seed can optionally be encrypted.
 Input your passphrase if you wish to encrypt it (or press enter to proceed without a cipher seed passphrase):
 ```
@ -90,30 +90,30 @@ silently decrypt to a new (likely empty) wallet.

 The initial entry point to trigger recovery of on-chain funds in the command
 line is the `lncli create` command.
-```
+```shell
 ⛰   lncli create
 ```

 Next, one can enter a _new_ wallet password to encrypt any newly derived keys
 as a result of the recovery process.
-```
+```text
 Input wallet password:
 Confirm wallet password:
 ```

 Once a new wallet password has been obtained, the user will be prompted for
 their _existing_ cipher seed:
-```
+```text
 Input your 24-word mnemonic separated by spaces: ability noise lift document certain month shoot perfect matrix mango excess turkey river pitch fluid rack drill text buddy pool soul fatal ship jelly
 ```

 If a _cipher seed passphrase_ was used when the seed was created, it MUST be entered now:
-```
+```text
 Input your cipher seed passphrase (press enter if your seed doesn't have a passphrase):
 ```

 Finally, the user has an option to choose a _recovery window_:
-```
+```text
 Input an optional address look-ahead used to scan for used keys (default 2500):
 ```

@ -126,7 +126,7 @@ default value.

 If all the information provided was valid, then you'll be presented with the
 seed again: 
-```
+```text

 !!!YOU MUST WRITE DOWN THIS SEED TO BE ABLE TO RESTORE THE WALLET!!!

@ -145,7 +145,7 @@ lnd successfully initialized!
 ```

 In `lnd`'s logs, you should see something along the lines of (irrelevant lines skipped):
-```
+```text
 [INF] LNWL: Opened wallet
 [INF] LTND: Wallet recovery mode enabled with address lookahead of 2500 addresses
 [INF] LNWL: RECOVERY MODE ENABLED -- rescanning for used addresses with recovery_window=2500
@ -166,7 +166,8 @@ window. Depending on how old the wallet is (the cipher seed stores the wallet's
 birthday!) and how many addresses were used, the rescan may take anywhere from
 a few minutes to a few hours. To track the recovery progress, one can use the
 command `lncli getrecoveryinfo`. When finished, the following is returned,
-```
+```shell
+⛰  lncli getrecoveryinfo
 {
    "recovery_mode": true,
    "recovery_finished": true,
@ -177,7 +178,7 @@ command `lncli getrecoveryinfo`. When finished, the following is returned,
 If the rescan wasn't able to complete fully (`lnd` was shutdown for example),
 then from `lncli unlock`, it's possible to _restart_ the rescan from where it
 left off with the `--recovery-window` argument:
-```
+```shell
 ⛰  lncli unlock --recovery_window=2500
 ```

@ -191,7 +192,7 @@ The recovery methods described above assume a clean slate for a node, so
 there's no existing UTXO or key data in the node's database. However, there're
 times when an _existing_ node may want to _manually_ rescan the chain. We have
 a command line flag for that! Just start `lnd` and add the following flag:
-```
+```shell
 ⛰  lnd --reset-wallet-transactions
 ```

@ -202,7 +203,7 @@ some older wallets).
 Just run `lnd` with the flag, unlock it, then the wallet should begin
 rescanning. An entry resembling the following will show up in the logs once it's
 complete:
-```
+```text
 [INF] LNWL: Finished rescan for 800 addresses (synced to block 3032830c812a4a6ea305d8ead13b52e9e69d6400ff3c997970b6f76fbc770920, height 748)
 ```

@ -247,9 +248,7 @@ entries for _all_ currently open channels. Each time a channel is opened or
 closed, this file is updated on disk in a safe manner (atomic file rename). As
 a result, unlike the `channel.db` file, it's _always_ safe to copy this file
 for backup at ones desired location. The default location on Linux is: 
-```
-~/.lnd/data/chain/bitcoin/mainnet/channel.backup
-```
+`~/.lnd/data/chain/bitcoin/mainnet/channel.backup`

 An example of using file system level notification to [copy the backup to a
 distinct volume/partition/drive can be found
@ -259,7 +258,7 @@ here](https://gist.github.com/alexbosworth/2c5e185aedbdac45a03655b709e255a3).

 Another way to obtain SCBS for all or a target channel is via the new
 `exportchanbackup` `lncli` command:
-```
+```shell
 ⛰  lncli --network=simnet exportchanbackup --chan_point=29be6d259dc71ebdf0a3a0e83b240eda78f9023d8aeaae13c89250c7e59467d5:0
 {
    "chan_point": "29be6d259dc71ebdf0a3a0e83b240eda78f9023d8aeaae13c89250c7e59467d5:0",
@ -293,14 +292,14 @@ schemes, compared to the file system notification based approach.

 If a node is being created from scratch, then it's possible to pass in an
 existing SCB using the `lncli create` or `lncli unlock` commands:
-```
+```shell
 ⛰  lncli create -multi_file=channels.backup
 ```

 Alternatively, the `restorechanbackup` command can be used if `lnd` has already
 been created at the time of SCB restoration:
-```
-⛰   lncli restorechanbackup -h
+```shell
+⛰  lncli restorechanbackup -h
 NAME:
   lncli restorechanbackup - Restore an existing single or multi-channel static channel backup

--- a/docs/release.md
+++ b/docs/release.md
@ -19,10 +19,12 @@ helper image.

 To build a release, run the following commands:

-1. `git clone https://github.com/lightningnetwork/lnd.git`
-2. `cd lnd`
-3. `git checkout <TAG> # <TAG> is the name of the next release/tag`
-4. `make docker-release tag=<TAG>`
+```shell
+⛰  git clone https://github.com/lightningnetwork/lnd.git
+⛰  cd lnd
+⛰  git checkout <TAG> # <TAG> is the name of the next release/tag
+⛰  make docker-release tag=<TAG>
+```

 Where `<TAG>` is the name of the next release of `lnd`.

@ -33,10 +35,12 @@ release binaries. However, on Windows, the only way to build the release
 binaries at the moment is by using the Windows Subsystem Linux. One can build
 the release binaries following these steps:

-1. `git clone https://github.com/lightningnetwork/lnd.git`
-2. `cd lnd`
-3. `git checkout <TAG> # <TAG> is the name of the next release/tag`
-4. `make release tag=<TAG>`
+```shell
+⛰  git clone https://github.com/lightningnetwork/lnd.git
+⛰  cd lnd
+⛰  git checkout <TAG> # <TAG> is the name of the next release/tag
+⛰  make release tag=<TAG>
+```

 This will then create a directory of the form `lnd-<TAG>` containing archives
 of the release binaries for each supported operating system and architecture,
--- a/docs/watchtower.md
+++ b/docs/watchtower.md
@ -44,8 +44,8 @@ The minimal configuration needed to activate the tower is `watchtower.active=1`.
 Retrieving information about your tower’s configurations can be done using
 `lncli tower info`:

-```
-🏔 lncli tower info
+```shell
+⛰  lncli tower info
 {
        "pubkey": "03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63",
        "listeners": [
@ -58,7 +58,9 @@ Retrieving information about your tower’s configurations can be done using
 The entire set of watchtower configuration options can be found using 
 `lnd -h`:

-```
+```shell
+⛰  lncli -h
+...
 watchtower:
      --watchtower.active                                     If the watchtower should be active or not
      --watchtower.towerdir=                                  Directory of the watchtower.db (default: $HOME/.lnd/data/watchtower)
@ -66,6 +68,7 @@ watchtower:
      --watchtower.externalip=                                Add interfaces/ports where the watchtower can accept peer connections
      --watchtower.readtimeout=                               Duration the watchtower server will wait for messages to be received before hanging up on client connections
      --watchtower.writetimeout=                              Duration the watchtower server will wait for messages to be written before hanging up on client connections
+...
 ```

 ### Listening Interfaces
@ -83,7 +86,8 @@ Additionally, users can specify their tower’s external IP address(es) using
 `watchtower.externalip=`, which will expose the full tower URIs
 (pubkey@host:port) over RPC or `lncli tower info`: 

-```
+```shell
+⛰  lncli tower info
        ...
        "uris": [
                "03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63@1.2.3.4:9911"
@ -93,8 +97,8 @@ Additionally, users can specify their tower’s external IP address(es) using
 The watchtower's URIs can be given to clients in order to connect and use the
 tower with the following command:

-```
-🏔 lncli wtclient add 03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63@1.2.3.4:9911
+```shell
+⛰  lncli wtclient add 03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63@1.2.3.4:9911
 ```

 If the watchtower's clients will need remote access, be sure to either:
@ -107,13 +111,14 @@ If the watchtower's clients will need remote access, be sure to either:
 Watchtowers have tor hidden service support and can automatically generate a
 hidden service on startup with the following flags:

-```
-🏔 lnd --tor.active --tor.v3 --watchtower.active
+```shell
+⛰  lnd --tor.active --tor.v3 --watchtower.active
 ```

 The onion address is then shown in the "uris" field when queried with `lncli tower info`:

-```
+```shell
+⛰  lncli tower info
 ...
 "uris": [
        "03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63@bn2kxggzjysvsd5o3uqe4h7655u7v2ydhxzy7ea2fx26duaixlwuguad.onion:9911"
@ -135,10 +140,7 @@ chains, so setting `watchtower.towerdir=/path/to/towerdir` will yield a
 watchtower database at `/path/to/towerdir/bitcoin/mainnet/watchtower.db`.

 On Linux, for example, the default watchtower database will be located at:
-
-```
-/$USER/.lnd/data/watchtower/bitcoin/mainnet/watchtower.db
-```
+`/home/$USER/.lnd/data/watchtower/bitcoin/mainnet/watchtower.db`

 ## Configuring a Watchtower Client

@ -146,14 +148,14 @@ In order to set up a watchtower client, you’ll need two things:

 1. The watchtower client must be enabled with the `--wtclient.active` flag.

-```
-🏔 lnd --wtclient.active
+```shell
+⛰  lnd --wtclient.active
 ```

 2. The watchtower URI of an active watchtower.

-```
-🏔 lncli wtclient add 03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63@1.2.3.4:9911
+```shell
+⛰  lncli wtclient add 03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63@1.2.3.4:9911
 ```

 Multiple watchtowers can be configured through this method.
@ -177,8 +179,8 @@ number of sessions currently negotiated with the watchtower added above and
 determine whether it is currently being used for backups through the
 `active_session_candidate` value.

-```
-🏔 lncli wtclient tower 03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63
+```shell
+⛰  lncli wtclient tower 03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63
 {
 	"pubkey": "03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63",
 	"addresses": [
@ -193,8 +195,8 @@ determine whether it is currently being used for backups through the
 To obtain information about the watchtower's sessions, users can use the
 `--include_sessions` flag.

-```
-🏔 lncli wtclient tower --include_sessions 03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63
+```shell
+⛰  lncli wtclient tower --include_sessions 03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63
 {
        "pubkey": "03281d603b2c5e19b8893a484eb938d7377179a9ef1a6bca4c0bcbbfc291657b63",
        "addresses": [
@ -216,7 +218,8 @@ To obtain information about the watchtower's sessions, users can use the
 The entire set of watchtower client configuration options can be found with
 `lncli wtclient -h`:

-```
+```shell
+⛰  lncli wtclient -h
 NAME:
   lncli wtclient - Interact with the watchtower client.

--- a/lnrpc/README.md
+++ b/lnrpc/README.md
@ -147,8 +147,8 @@ description):

 ## Installation and Updating

-```bash
-$ go get -u github.com/lightningnetwork/lnd/lnrpc
+```shell
+⛰  go get -u github.com/lightningnetwork/lnd/lnrpc
 ```

 ## Generate protobuf definitions
@ -160,40 +160,42 @@ build. Just run the following command (requires `sudo` permissions and the tools
 `make`, `go`, `wget` and `unzip` to be installed) from the repository's root
 folder:

-`./scripts/install_travis_proto.sh`
+```shell
+⛰  ./scripts/install_travis_proto.sh
+```

 ### MacOS / Unix like systems

 1. Download [v.3.4.0](https://github.com/google/protobuf/releases/tag/v3.4.0) of
 `protoc` for your operating system and add it to your `PATH`.
 For example, if using macOS:
-```bash
-$ curl -LO https://github.com/google/protobuf/releases/download/v3.4.0/protoc-3.4.0-osx-x86_64.zip
-$ unzip protoc-3.4.0-osx-x86_64.zip -d protoc
-$ export PATH=$PWD/protoc/bin:$PATH
+```shell
+⛰  curl -LO https://github.com/google/protobuf/releases/download/v3.4.0/protoc-3.4.0-osx-x86_64.zip
+⛰  unzip protoc-3.4.0-osx-x86_64.zip -d protoc
+⛰  export PATH=$PWD/protoc/bin:$PATH
 ```

 2. Install `golang/protobuf` at version `v1.3.2`.
-```bash
-$ git clone https://github.com/golang/protobuf $GOPATH/src/github.com/golang/protobuf
-$ cd $GOPATH/src/github.com/golang/protobuf
-$ git reset --hard v1.3.2
-$ make
+```shell
+⛰  git clone https://github.com/golang/protobuf $GOPATH/src/github.com/golang/protobuf
+⛰  cd $GOPATH/src/github.com/golang/protobuf
+⛰  git reset --hard v1.3.2
+⛰  make
 ```

 3. Install 'genproto' at commit `20e1ac93f88cf06d2b1defb90b9e9e126c7dfff6`.
-```bash
-$ go get google.golang.org/genproto
-$ cd $GOPATH/src/google.golang.org/genproto
-$ git reset --hard 20e1ac93f88cf06d2b1defb90b9e9e126c7dfff6
+```shell
+⛰  go get google.golang.org/genproto
+⛰  cd $GOPATH/src/google.golang.org/genproto
+⛰  git reset --hard 20e1ac93f88cf06d2b1defb90b9e9e126c7dfff6
 ```

 4. Install `grpc-ecosystem/grpc-gateway` at version `v1.14.3`.
-```bash
-$ git clone https://github.com/grpc-ecosystem/grpc-gateway $GOPATH/src/github.com/grpc-ecosystem/grpc-gateway
-$ cd $GOPATH/src/github.com/grpc-ecosystem/grpc-gateway
-$ git reset --hard v1.14.3
-$ go install ./protoc-gen-grpc-gateway ./protoc-gen-swagger
+```shell
+⛰  git clone https://github.com/grpc-ecosystem/grpc-gateway $GOPATH/src/github.com/grpc-ecosystem/grpc-gateway
+⛰  cd $GOPATH/src/github.com/grpc-ecosystem/grpc-gateway
+⛰  git reset --hard v1.14.3
+⛰  go install ./protoc-gen-grpc-gateway ./protoc-gen-swagger
 ```

 5. Run [`gen_protos.sh`](https://github.com/lightningnetwork/lnd/blob/master/lnrpc/gen_protos.sh)
--- a/lnwallet/README.md
+++ b/lnwallet/README.md
@ -21,6 +21,6 @@ with the interface.

 ## Installation and Updating

-```bash
-$ go get -u github.com/lightningnetwork/lnd/lnwallet
+```shell
+⛰  go get -u github.com/lightningnetwork/lnd/lnwallet
 ```
--- a/lnwire/README.md
+++ b/lnwire/README.md
@ -13,6 +13,6 @@ protocol level.

 ## Installation and Updating

-```bash
-$ go get -u github.com/lightningnetwork/lnd/lnwire
+```shell
+⛰  go get -u github.com/lightningnetwork/lnd/lnwire
 ```
--- a/macaroons/README.md
+++ b/macaroons/README.md
@ -98,13 +98,17 @@ default macaroons (`admin`, `invoice` and `readonly`) are not sufficient.
 For example, a macaroon that is only allowed to manage peers with a default root
 key `0` would be created with the following command:

-`lncli bakemacaroon peers:read peers:write`
+```shell
+⛰  lncli bakemacaroon peers:read peers:write
+```

 For even more fine-grained permission control, it is also possible to specify
 single RPC method URIs that are allowed to be accessed by a macaroon. This can
 be achieved by passing `uri:<methodURI>` pairs to `bakemacaroon`, for example:

-`lncli bakemacaroon uri:/lnrpc.Lightning/GetInfo uri:/verrpc.Versioner/GetVersion`
+```shell
+⛰  lncli bakemacaroon uri:/lnrpc.Lightning/GetInfo uri:/verrpc.Versioner/GetVersion
+```

 The macaroon created by this call would only be allowed to call the `GetInfo` and
 `GetVersion` methods instead of all methods that have similar permissions (like
@ -132,11 +136,15 @@ To manage the root keys used by macaroons, there are `listmacaroonids` and
 `deletemacaroonid` available through gPRC and command line.
 Users can view a list of all macaroon root key IDs that are in use using:

-`lncli listmacaroonids`
+```shell
+⛰  lncli listmacaroonids
+```

 And remove a specific macaroon root key ID using command:

-`lncli deletemacaroonid root_key_id`
+```shell
+⛰  lncli deletemacaroonid root_key_id
+```

 Be careful with the `deletemacaroonid` command as when a root key is deleted,
 **all the macaroons created from it are invalidated**.
--- a/mobile/README.md
+++ b/mobile/README.md
@ -16,18 +16,18 @@ point.

 #### falafel
 Install [`falafel`](https://github.com/lightninglabs/falafel):
-```
-go get -u -v github.com/lightninglabs/falafel
+```shell
+⛰  go get -u -v github.com/lightninglabs/falafel
 ```

 ### Building `lnd` for iOS
-```
-make ios
+```shell
+⛰  make ios
 ```

 ### Building `lnd` for Android
-```
-make android
+```shell
+⛰  make android
 ```

 `make mobile` will build both iOS and Android libs.
@ -52,15 +52,15 @@ Swift, add `--swift_out=.` and run `make rpc`.
 Similar to lnd, subservers can be conditionally compiled with the build by
 setting the tags argument:

-```
-make ios
+```shell
+⛰  make ios
 ```

 To support subservers that have APIs with name conflicts, pass the "prefix"
 flag. This will add the subserver name as a prefix to each method name:

-```
-make ios prefix=1
+```shell
+⛰  make ios prefix=1
 ```

 ### API docs
--- a/routing/README.md
+++ b/routing/README.md
@ -12,6 +12,6 @@ channel graph state.

 ## Installation and Updating

-```bash
-$ go get -u github.com/lightningnetwork/lnd/routing
+```shell
+⛰  go get -u github.com/lightningnetwork/lnd/routing
 ```
--- a/tor/README.md
+++ b/tor/README.md
@ -16,6 +16,6 @@ onion services, asynchronous messages, etc.

 ## Installation and Updating

-```bash
-$ go get -u github.com/lightningnetwork/lnd/tor
+```shell
+⛰  go get -u github.com/lightningnetwork/lnd/tor
 ```
--- a/zpay32/README.md
+++ b/zpay32/README.md
@ -17,6 +17,6 @@ to send.

 ## Installation and Updating

-```bash
-$ go get -u github.com/lightningnetwork/lnd/zpay32
+```shell
+⛰  go get -u github.com/lightningnetwork/lnd/zpay32
 ```