multi: replace manual CAS with sync.Once in several more modules

channelnotifier/channelnotifier.go

@@ -1,7 +1,7 @@
 package channelnotifier
 
 import (
-	"sync/atomic"
+	"sync"
 
 	"github.com/btcsuite/btcd/wire"
 	"github.com/lightningnetwork/lnd/channeldb"
@@ -12,8 +12,8 @@ import (
 // events pipe through. It takes subscriptions for its events, and whenever
 // it receives a new event it notifies its subscribers over the proper channel.
 type ChannelNotifier struct {
-	started uint32
+	started sync.Once
-	stopped uint32
+	stopped sync.Once
 
 	ntfnServer *subscribe.Server
 
@@ -57,26 +57,19 @@ func New(chanDB *channeldb.DB) *ChannelNotifier {
 
 // Start starts the ChannelNotifier and all goroutines it needs to carry out its task.
 func (c *ChannelNotifier) Start() error {
-	if !atomic.CompareAndSwapUint32(&c.started, 0, 1) {
+	var err error
-		return nil
+	c.started.Do(func() {
-	}
-
 		log.Tracef("ChannelNotifier %v starting", c)
-
+		err = c.ntfnServer.Start()
-	if err := c.ntfnServer.Start(); err != nil {
+	})
 	return err
 }
 
-	return nil
-}
-
 // Stop signals the notifier for a graceful shutdown.
 func (c *ChannelNotifier) Stop() {
-	if !atomic.CompareAndSwapUint32(&c.stopped, 0, 1) {
+	c.stopped.Do(func() {
-		return
-	}
-
 		c.ntfnServer.Stop()
+	})
 }
 
 // SubscribeChannelEvents returns a subscribe.Client that will receive updates

discovery/gossiper.go

@@ -225,9 +225,9 @@ type Config struct {
 // will be rejected by this struct.
 type AuthenticatedGossiper struct {
 	// Parameters which are needed to properly handle the start and stop of
-	// the service. To be used atomically.
+	// the service.
-	started uint32
+	started sync.Once
-	stopped uint32
+	stopped sync.Once
 
 	// bestHeight is the height of the block at the tip of the main chain
 	// as we know it. To be used atomically.
@@ -468,10 +468,14 @@ func (d *AuthenticatedGossiper) PropagateChanPolicyUpdate(
 // Start spawns network messages handler goroutine and registers on new block
 // notifications in order to properly handle the premature announcements.
 func (d *AuthenticatedGossiper) Start() error {
-	if !atomic.CompareAndSwapUint32(&d.started, 0, 1) {
+	var err error
-		return nil
+	d.started.Do(func() {
+		err = d.start()
+	})
+	return err
 }
 
+func (d *AuthenticatedGossiper) start() error {
 	log.Info("Authenticated Gossiper is starting")
 
 	// First we register for new notifications of newly discovered blocks.
@@ -506,10 +510,10 @@ func (d *AuthenticatedGossiper) Start() error {
 
 // Stop signals any active goroutines for a graceful closure.
 func (d *AuthenticatedGossiper) Stop() {
-	if !atomic.CompareAndSwapUint32(&d.stopped, 0, 1) {
+	d.stopped.Do(d.stop)
-		return
 }
 
+func (d *AuthenticatedGossiper) stop() {
 	log.Info("Authenticated Gossiper is stopping")
 
 	d.blockEpochs.Cancel()

htlcswitch/mailbox.go

@@ -4,7 +4,6 @@ import (
 	"container/list"
 	"errors"
 	"sync"
-	"sync/atomic"
 	"time"
 
 	"github.com/lightningnetwork/lnd/lnwire"
@@ -60,8 +59,8 @@ type MailBox interface {
 // memoryMailBox is an implementation of the MailBox struct backed by purely
 // in-memory queues.
 type memoryMailBox struct {
-	started uint32 // To be used atomically.
+	started sync.Once
-	stopped uint32 // To be used atomically.
+	stopped sync.Once
 
 	wireMessages *list.List
 	wireHead     *list.Element
@@ -123,14 +122,11 @@ const (
 //
 // NOTE: This method is part of the MailBox interface.
 func (m *memoryMailBox) Start() error {
-	if !atomic.CompareAndSwapUint32(&m.started, 0, 1) {
+	m.started.Do(func() {
-		return nil
-	}
-
 		m.wg.Add(2)
 		go m.mailCourier(wireCourier)
 		go m.mailCourier(pktCourier)
-
+	})
 	return nil
 }
 
@@ -214,15 +210,12 @@ func (m *memoryMailBox) HasPacket(inKey CircuitKey) bool {
 //
 // NOTE: This method is part of the MailBox interface.
 func (m *memoryMailBox) Stop() error {
-	if !atomic.CompareAndSwapUint32(&m.stopped, 0, 1) {
+	m.stopped.Do(func() {
-		return nil
-	}
-
 		close(m.quit)
 
 		m.wireCond.Signal()
 		m.pktCond.Signal()
-
+	})
 	return nil
 }
 

lnrpc/chainrpc/chainnotifer_server.go

@@ -9,7 +9,7 @@ import (
 	"io/ioutil"
 	"os"
 	"path/filepath"
-	"sync/atomic"
+	"sync"
 
 	"github.com/btcsuite/btcd/chaincfg/chainhash"
 	"github.com/btcsuite/btcd/wire"
@@ -81,8 +81,8 @@ func fileExists(name string) bool {
 // to lnd, even backed by multiple distinct lnd across independent failure
 // domains.
 type Server struct {
-	started uint32
+	started sync.Once
-	stopped uint32
+	stopped sync.Once
 
 	cfg Config
 
@@ -146,10 +146,7 @@ var _ lnrpc.SubServer = (*Server)(nil)
 //
 // NOTE: This is part of the lnrpc.SubServer interface.
 func (s *Server) Start() error {
-	if !atomic.CompareAndSwapUint32(&s.started, 0, 1) {
+	s.started.Do(func() {})
-		return nil
-	}
-
 	return nil
 }
 
@@ -157,12 +154,9 @@ func (s *Server) Start() error {
 //
 // NOTE: This is part of the lnrpc.SubServer interface.
 func (s *Server) Stop() error {
-	if !atomic.CompareAndSwapUint32(&s.stopped, 0, 1) {
+	s.stopped.Do(func() {
-		return nil
-	}
-
 		close(s.quit)
-
+	})
 	return nil
 }
 

lnwallet/sigpool.go

@@ -3,7 +3,6 @@ package lnwallet
 import (
 	"fmt"
 	"sync"
-	"sync/atomic"
 
 	"github.com/btcsuite/btcd/btcec"
 	"github.com/btcsuite/btcd/wire"
@@ -125,8 +124,8 @@ type SignJobResp struct {
 // to sign or verify) can be sent to the pool of workers which will
 // asynchronously perform the specified job.
 type SigPool struct {
-	started uint32 // To be used atomically.
+	started sync.Once
-	stopped uint32 // To be used atomically.
+	stopped sync.Once
 
 	signer input.Signer
 
@@ -155,28 +154,22 @@ func NewSigPool(numWorkers int, signer input.Signer) *SigPool {
 // Start starts of all goroutines that the sigPool sig pool needs to
 // carry out its duties.
 func (s *SigPool) Start() error {
-	if !atomic.CompareAndSwapUint32(&s.started, 0, 1) {
+	s.started.Do(func() {
-		return nil
-	}
-
 		for i := 0; i < s.numWorkers; i++ {
 			s.wg.Add(1)
 			go s.poolWorker()
 		}
-
+	})
 	return nil
 }
 
 // Stop signals any active workers carrying out jobs to exit so the sigPool can
 // gracefully shutdown.
 func (s *SigPool) Stop() error {
-	if !atomic.CompareAndSwapUint32(&s.stopped, 0, 1) {
+	s.stopped.Do(func() {
-		return nil
-	}
-
 		close(s.quit)
 		s.wg.Wait()
-
+	})
 	return nil
 }
 

netann/chan_status_manager.go

@@ -3,7 +3,6 @@ package netann
 import (
 	"errors"
 	"sync"
-	"sync/atomic"
 	"time"
 
 	"github.com/btcsuite/btcd/btcec"
@@ -85,8 +84,8 @@ type ChanStatusConfig struct {
 // passively. The ChanStatusManager state machine is designed to reduce the
 // likelihood of spamming the network with updates for flapping peers.
 type ChanStatusManager struct {
-	started uint32 // to be used atomically
+	started sync.Once
-	stopped uint32 // to be used atomically
+	stopped sync.Once
 
 	cfg *ChanStatusConfig
 
@@ -155,10 +154,14 @@ func NewChanStatusManager(cfg *ChanStatusConfig) (*ChanStatusManager, error) {
 
 // Start safely starts the ChanStatusManager.
 func (m *ChanStatusManager) Start() error {
-	if !atomic.CompareAndSwapUint32(&m.started, 0, 1) {
+	var err error
-		return nil
+	m.started.Do(func() {
+		err = m.start()
+	})
+	return err
 }
 
+func (m *ChanStatusManager) start() error {
 	channels, err := m.fetchChannels()
 	if err != nil {
 		return err
@@ -192,13 +195,10 @@ func (m *ChanStatusManager) Start() error {
 
 // Stop safely shuts down the ChanStatusManager.
 func (m *ChanStatusManager) Stop() error {
-	if !atomic.CompareAndSwapUint32(&m.stopped, 0, 1) {
+	m.stopped.Do(func() {
-		return nil
-	}
-
 		close(m.quit)
 		m.wg.Wait()
-
+	})
 	return nil
 }
 

queue/queue.go

@@ -3,7 +3,6 @@ package queue
 import (
 	"container/list"
 	"sync"
-	"sync/atomic"
 )
 
 // ConcurrentQueue is a concurrent-safe FIFO queue with unbounded capacity.
@@ -12,8 +11,8 @@ import (
 // items from the in channel to the out channel in the correct order that must
 // be started by calling Start().
 type ConcurrentQueue struct {
-	started uint32 // to be used atomically
+	started sync.Once
-	stopped uint32 // to be used atomically
+	stopped sync.Once
 
 	chanIn   chan interface{}
 	chanOut  chan interface{}
@@ -51,10 +50,10 @@ func (cq *ConcurrentQueue) ChanOut() <-chan interface{} {
 // minimize overhead, but if the out channel is full it pushes items to an
 // overflow queue. This must be called before using the queue.
 func (cq *ConcurrentQueue) Start() {
-	if !atomic.CompareAndSwapUint32(&cq.started, 0, 1) {
+	cq.started.Do(cq.start)
-		return
 }
 
+func (cq *ConcurrentQueue) start() {
 	cq.wg.Add(1)
 	go func() {
 		defer cq.wg.Done()
@@ -96,10 +95,8 @@ func (cq *ConcurrentQueue) Start() {
 // channel. This does not clear the queue state, so the queue can be restarted
 // without dropping items.
 func (cq *ConcurrentQueue) Stop() {
-	if !atomic.CompareAndSwapUint32(&cq.stopped, 0, 1) {
+	cq.stopped.Do(func() {
-		return
-	}
-
 		close(cq.quit)
 		cq.wg.Wait()
+	})
 }