lnd.xprv/sweep/walletsweep_test.go

396 lines
10 KiB
Go
Raw Normal View History

package sweep
import (
"bytes"
"fmt"
"testing"
"github.com/btcsuite/btcd/chaincfg"
"github.com/btcsuite/btcd/txscript"
"github.com/btcsuite/btcd/wire"
"github.com/btcsuite/btcutil"
"github.com/lightningnetwork/lnd/lntest/mock"
"github.com/lightningnetwork/lnd/lnwallet"
"github.com/lightningnetwork/lnd/lnwallet/chainfee"
)
// TestDetermineFeePerKw tests that given a fee preference, the
// DetermineFeePerKw will properly map it to a concrete fee in sat/kw.
func TestDetermineFeePerKw(t *testing.T) {
t.Parallel()
defaultFee := chainfee.SatPerKWeight(999)
relayFee := chainfee.SatPerKWeight(300)
feeEstimator := newMockFeeEstimator(defaultFee, relayFee)
// We'll populate two items in the internal map which is used to query
// a fee based on a confirmation target: the default conf target, and
// an arbitrary conf target. We'll ensure below that both of these are
// properly
feeEstimator.blocksToFee[50] = 300
feeEstimator.blocksToFee[defaultNumBlocksEstimate] = 1000
testCases := []struct {
// feePref is the target fee preference for this case.
feePref FeePreference
// fee is the value the DetermineFeePerKw should return given
// the FeePreference above
fee chainfee.SatPerKWeight
// fail determines if this test case should fail or not.
fail bool
}{
// A fee rate below the fee rate floor should output the floor.
{
feePref: FeePreference{
FeeRate: chainfee.SatPerKWeight(99),
},
fee: chainfee.FeePerKwFloor,
},
// A fee rate above the floor, should pass through and return
// the target fee rate.
{
feePref: FeePreference{
FeeRate: 900,
},
fee: 900,
},
// A specified confirmation target should cause the function to
// query the estimator which will return our value specified
// above.
{
feePref: FeePreference{
ConfTarget: 50,
},
fee: 300,
},
// If the caller doesn't specify any values at all, then we
// should query for the default conf target.
{
feePref: FeePreference{},
fee: 1000,
},
// Both conf target and fee rate are set, we should return with
// an error.
{
feePref: FeePreference{
ConfTarget: 50,
FeeRate: 90000,
},
fee: 300,
fail: true,
},
}
for i, testCase := range testCases {
targetFee, err := DetermineFeePerKw(
feeEstimator, testCase.feePref,
)
switch {
case testCase.fail && err != nil:
continue
case testCase.fail && err == nil:
t.Fatalf("expected failure for #%v", i)
case !testCase.fail && err != nil:
t.Fatalf("unable to estimate fee; %v", err)
}
if targetFee != testCase.fee {
t.Fatalf("#%v: wrong fee: expected %v got %v", i,
testCase.fee, targetFee)
}
}
}
type mockUtxoSource struct {
outputs []*lnwallet.Utxo
}
func newMockUtxoSource(utxos []*lnwallet.Utxo) *mockUtxoSource {
return &mockUtxoSource{
outputs: utxos,
}
}
func (m *mockUtxoSource) ListUnspentWitnessFromDefaultAccount(minConfs int32,
maxConfs int32) ([]*lnwallet.Utxo, error) {
return m.outputs, nil
}
type mockCoinSelectionLocker struct {
fail bool
}
func (m *mockCoinSelectionLocker) WithCoinSelectLock(f func() error) error {
if err := f(); err != nil {
return err
}
if m.fail {
return fmt.Errorf("kek")
}
return nil
}
type mockOutpointLocker struct {
lockedOutpoints map[wire.OutPoint]struct{}
unlockedOutpoints map[wire.OutPoint]struct{}
}
func newMockOutpointLocker() *mockOutpointLocker {
return &mockOutpointLocker{
lockedOutpoints: make(map[wire.OutPoint]struct{}),
unlockedOutpoints: make(map[wire.OutPoint]struct{}),
}
}
func (m *mockOutpointLocker) LockOutpoint(o wire.OutPoint) {
m.lockedOutpoints[o] = struct{}{}
}
func (m *mockOutpointLocker) UnlockOutpoint(o wire.OutPoint) {
m.unlockedOutpoints[o] = struct{}{}
}
var sweepScript = []byte{
0x0, 0x14, 0x64, 0x3d, 0x8b, 0x15, 0x69, 0x4a, 0x54,
0x7d, 0x57, 0x33, 0x6e, 0x51, 0xdf, 0xfd, 0x38, 0xe3,
0xe, 0x6e, 0xf8, 0xef,
}
var deliveryAddr = func() btcutil.Address {
_, addrs, _, err := txscript.ExtractPkScriptAddrs(
sweepScript, &chaincfg.TestNet3Params,
)
if err != nil {
panic(err)
}
return addrs[0]
}()
var testUtxos = []*lnwallet.Utxo{
{
// A p2wkh output.
AddressType: lnwallet.WitnessPubKey,
PkScript: []byte{
0x0, 0x14, 0x64, 0x3d, 0x8b, 0x15, 0x69, 0x4a, 0x54,
0x7d, 0x57, 0x33, 0x6e, 0x51, 0xdf, 0xfd, 0x38, 0xe3,
0xe, 0x6e, 0xf7, 0xef,
},
Value: 1000,
OutPoint: wire.OutPoint{
Index: 1,
},
},
{
// A np2wkh output.
AddressType: lnwallet.NestedWitnessPubKey,
PkScript: []byte{
0xa9, 0x14, 0x97, 0x17, 0xf7, 0xd1, 0x5f, 0x6f, 0x8b,
0x7, 0xe3, 0x58, 0x43, 0x19, 0xb9, 0x7e, 0xa9, 0x20,
0x18, 0xc3, 0x17, 0xd7, 0x87,
},
Value: 2000,
OutPoint: wire.OutPoint{
Index: 2,
},
},
// A p2wsh output.
{
AddressType: lnwallet.UnknownAddressType,
PkScript: []byte{
0x0, 0x20, 0x70, 0x1a, 0x8d, 0x40, 0x1c, 0x84, 0xfb, 0x13,
0xe6, 0xba, 0xf1, 0x69, 0xd5, 0x96, 0x84, 0xe2, 0x7a, 0xbd,
0x9f, 0xa2, 0x16, 0xc8, 0xbc, 0x5b, 0x9f, 0xc6, 0x3d, 0x62,
0x2f, 0xf8, 0xc5, 0x8c,
},
Value: 3000,
OutPoint: wire.OutPoint{
Index: 3,
},
},
}
func assertUtxosLocked(t *testing.T, utxoLocker *mockOutpointLocker,
utxos []*lnwallet.Utxo) {
t.Helper()
for _, utxo := range utxos {
if _, ok := utxoLocker.lockedOutpoints[utxo.OutPoint]; !ok {
t.Fatalf("utxo %v was never locked", utxo.OutPoint)
}
}
}
func assertNoUtxosUnlocked(t *testing.T, utxoLocker *mockOutpointLocker,
utxos []*lnwallet.Utxo) {
t.Helper()
if len(utxoLocker.unlockedOutpoints) != 0 {
t.Fatalf("outputs have been locked, but shouldn't have been")
}
}
func assertUtxosUnlocked(t *testing.T, utxoLocker *mockOutpointLocker,
utxos []*lnwallet.Utxo) {
t.Helper()
for _, utxo := range utxos {
if _, ok := utxoLocker.unlockedOutpoints[utxo.OutPoint]; !ok {
t.Fatalf("utxo %v was never unlocked", utxo.OutPoint)
}
}
}
func assertUtxosLockedAndUnlocked(t *testing.T, utxoLocker *mockOutpointLocker,
utxos []*lnwallet.Utxo) {
t.Helper()
for _, utxo := range utxos {
if _, ok := utxoLocker.lockedOutpoints[utxo.OutPoint]; !ok {
t.Fatalf("utxo %v was never locked", utxo.OutPoint)
}
if _, ok := utxoLocker.unlockedOutpoints[utxo.OutPoint]; !ok {
t.Fatalf("utxo %v was never unlocked", utxo.OutPoint)
}
}
}
// TestCraftSweepAllTxCoinSelectFail tests that if coin selection fails, then
// we unlock any outputs we may have locked in the passed closure.
func TestCraftSweepAllTxCoinSelectFail(t *testing.T) {
t.Parallel()
utxoSource := newMockUtxoSource(testUtxos)
coinSelectLocker := &mockCoinSelectionLocker{
fail: true,
}
utxoLocker := newMockOutpointLocker()
_, err := CraftSweepAllTx(
0, 100, 10, nil, nil, coinSelectLocker, utxoSource,
utxoLocker, nil, nil, 0,
)
// Since we instructed the coin select locker to fail above, we should
// get an error.
if err == nil {
t.Fatalf("sweep tx should have failed: %v", err)
}
// At this point, we'll now verify that all outputs were initially
// locked, and then also unlocked due to the failure.
assertUtxosLockedAndUnlocked(t, utxoLocker, testUtxos)
}
// TestCraftSweepAllTxUnknownWitnessType tests that if one of the inputs we
// encounter is of an unknown witness type, then we fail and unlock any prior
// locked outputs.
func TestCraftSweepAllTxUnknownWitnessType(t *testing.T) {
t.Parallel()
utxoSource := newMockUtxoSource(testUtxos)
coinSelectLocker := &mockCoinSelectionLocker{}
utxoLocker := newMockOutpointLocker()
_, err := CraftSweepAllTx(
0, 100, 10, nil, nil, coinSelectLocker, utxoSource,
utxoLocker, nil, nil, 0,
)
// Since passed in a p2wsh output, which is unknown, we should fail to
// map the output to a witness type.
if err == nil {
t.Fatalf("sweep tx should have failed: %v", err)
}
// At this point, we'll now verify that all outputs were initially
// locked, and then also unlocked since we weren't able to find a
// witness type for the last output.
assertUtxosLockedAndUnlocked(t, utxoLocker, testUtxos)
}
// TestCraftSweepAllTx tests that we'll properly lock all available outputs
// within the wallet, and craft a single sweep transaction that pays to the
// target output.
func TestCraftSweepAllTx(t *testing.T) {
t.Parallel()
// First, we'll make a mock signer along with a fee estimator, We'll
// use zero fees to we can assert a precise output value.
signer := &mock.DummySigner{}
feeEstimator := newMockFeeEstimator(0, 0)
// For our UTXO source, we'll pass in all the UTXOs that we know of,
// other than the final one which is of an unknown witness type.
targetUTXOs := testUtxos[:2]
utxoSource := newMockUtxoSource(targetUTXOs)
coinSelectLocker := &mockCoinSelectionLocker{}
utxoLocker := newMockOutpointLocker()
sweepPkg, err := CraftSweepAllTx(
0, 100, 10, nil, deliveryAddr, coinSelectLocker, utxoSource,
utxoLocker, feeEstimator, signer, 0,
)
if err != nil {
t.Fatalf("unable to make sweep tx: %v", err)
}
// At this point, all of the UTXOs that we made above should be locked
// and none of them unlocked.
assertUtxosLocked(t, utxoLocker, testUtxos[:2])
assertNoUtxosUnlocked(t, utxoLocker, testUtxos[:2])
// Now that we have our sweep transaction, we should find that we have
// a UTXO for each input, and also that our final output value is the
// sum of all our inputs.
sweepTx := sweepPkg.SweepTx
if len(sweepTx.TxIn) != len(targetUTXOs) {
t.Fatalf("expected %v utxo, got %v", len(targetUTXOs),
len(sweepTx.TxIn))
}
// We should have a single output that pays to our sweep script
// generated above.
expectedSweepValue := int64(3000)
if len(sweepTx.TxOut) != 1 {
t.Fatalf("should have %v outputs, instead have %v", 1,
len(sweepTx.TxOut))
}
output := sweepTx.TxOut[0]
switch {
case output.Value != expectedSweepValue:
t.Fatalf("expected %v sweep value, instead got %v",
expectedSweepValue, output.Value)
case !bytes.Equal(sweepScript, output.PkScript):
t.Fatalf("expected %x sweep script, instead got %x", sweepScript,
output.PkScript)
}
// If we cancel the sweep attempt, then we should find that all the
// UTXOs within the sweep transaction are now unlocked.
sweepPkg.CancelSweepAttempt()
assertUtxosUnlocked(t, utxoLocker, testUtxos[:2])
}