lnd.xprv/lnwire/single_funding_request.go

256 lines
8.4 KiB
Go
Raw Normal View History

package lnwire
import (
"fmt"
"io"
"github.com/roasbeef/btcd/btcec"
"github.com/roasbeef/btcutil"
)
// SingleFundingRequest is the message Alice sends to Bob if we should like
// to create a channel with Bob where she's the sole provider of funds to the
// channel. Single funder channels simplify the initial funding workflow, are
// supported by nodes backed by SPV Bitcoin clients, and have a simpler
// security models than dual funded channels.
//
// NOTE: In order to avoid a slow loris like resource exhaustion attack, the
// responder of a single funding channel workflow *should not* watch the
// blockchain for the funding transaction. Instead, it is the initiator's job
// to provide the responder with an SPV proof of funding transaction inclusion
// after a sufficient number of confirmations.
type SingleFundingRequest struct {
// ChannelID serves to uniquely identify the future channel created by
// the initiated single funder workflow.
ChannelID uint64
// ChannelType represents the type of channel this request would like
// to open. At this point, the only supported channels are type 0
// channels, which are channels with regular commitment transactions
// utilizing HTLC's for payments.
ChannelType uint8
// CoinType represents which blockchain the channel will be opened
// using. By default, this field should be set to 0, indicating usage
// of the Bitcoin blockchain.
CoinType uint64
// FeePerKb is the required number of satoshis per KB that the
// requester will pay at all timers, for both the funding transaction
// and commitment transaction. This value can later be updated once the
// channel is open.
FeePerKb btcutil.Amount
// FundingAmount is the number of satoshis the initiator would like
// to commit to the channel.
FundingAmount btcutil.Amount
// CsvDelay is the number of blocks to use for the relative time lock
// in the pay-to-self output of both commitment transactions.
CsvDelay uint32
// CommitmentKey is key the initiator of the funding workflow wishes to
// use within their versino of the commitment transaction for any
// delayed (CSV) or immediate outputs to them.
CommitmentKey *btcec.PublicKey
// ChannelDerivationPoint is an secp256k1 point which will be used to
// derive the public key the initiator will use for the half of the
// 2-of-2 multi-sig. Using the channel derivation point (CDP), and the
// initiators identity public key (A), the channel public key is
// computed as: C = A + CDP. In order to be valid all CDP's MUST have
// an odd y-coordinate.
ChannelDerivationPoint *btcec.PublicKey
// DeliveryPkScript defines the public key script that the initiator
// would like to use to receive their balance in the case of a
// cooperative close. Only the following script templates are
// supported: P2PKH, P2WKH, P2SH, and P2WSH.
DeliveryPkScript PkScript
// DustLimit is the threshold below which no HTLC output should be
// generated for our commitment transaction; ie. HTLCs below
// this amount are not enforceable onchain from our point view.
DustLimit btcutil.Amount
// TODO(roasbeef): confirmation depth
}
// NewSingleFundingRequest creates, and returns a new empty SingleFundingRequest.
func NewSingleFundingRequest(chanID uint64, chanType uint8, coinType uint64,
fee btcutil.Amount, amt btcutil.Amount, delay uint32, ck,
cdp *btcec.PublicKey, deliveryScript PkScript,
dustLimit btcutil.Amount) *SingleFundingRequest {
return &SingleFundingRequest{
ChannelID: chanID,
ChannelType: chanType,
CoinType: coinType,
FeePerKb: fee,
FundingAmount: amt,
CsvDelay: delay,
CommitmentKey: ck,
ChannelDerivationPoint: cdp,
DeliveryPkScript: deliveryScript,
DustLimit: dustLimit,
}
}
// Decode deserializes the serialized SingleFundingRequest stored in the passed
// io.Reader into the target SingleFundingRequest using the deserialization
// rules defined by the passed protocol version.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingRequest) Decode(r io.Reader, pver uint32) error {
// ChannelID (8)
// ChannelType (1)
// CoinType (8)
// FeePerKb (8)
// PaymentAmount (8)
// Delay (4)
// Pubkey (33)
// Pubkey (33)
// DeliveryPkScript (final delivery)
// DustLimit (8)
err := readElements(r,
&c.ChannelID,
&c.ChannelType,
&c.CoinType,
&c.FeePerKb,
&c.FundingAmount,
&c.CsvDelay,
&c.CommitmentKey,
&c.ChannelDerivationPoint,
&c.DeliveryPkScript,
&c.DustLimit)
if err != nil {
return err
}
return nil
}
// Encode serializes the target SingleFundingRequest into the passed io.Writer
// implementation. Serialization will observe the rules defined by the passed
// protocol version.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingRequest) Encode(w io.Writer, pver uint32) error {
// ChannelID (8)
// ChannelType (1)
// CoinType (8)
// FeePerKb (8)
// PaymentAmount (8)
// Delay (4)
// Pubkey (33)
// Pubkey (33)
// DeliveryPkScript (final delivery)
// DustLimit (8)
err := writeElements(w,
c.ChannelID,
c.ChannelType,
c.CoinType,
c.FeePerKb,
c.FundingAmount,
c.CsvDelay,
c.CommitmentKey,
c.ChannelDerivationPoint,
c.DeliveryPkScript,
c.DustLimit)
if err != nil {
return err
}
return nil
}
// Command returns the uint32 code which uniquely identifies this message as a
// SingleFundingRequest on the wire.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingRequest) Command() uint32 {
return CmdSingleFundingRequest
}
// MaxPayloadLength returns the maximum allowed payload length for a
// SingleFundingRequest. This is calculated by summing the max length of all
// the fields within a SingleFundingRequest. To enforce a maximum
// DeliveryPkScript size, the size of a P2PKH public key script is used.
// Therefore, the final breakdown is: 8 + 1 + 8 + 8 + 8 + 4 + 33 + 33 + 25 + 8 =
// 166.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingRequest) MaxPayloadLength(uint32) uint32 {
return 166
}
// Validate examines each populated field within the SingleFundingRequest for
// field sanity. For example, all fields MUST NOT be negative, and all pkScripts
// must belong to the allowed set of public key scripts.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingRequest) Validate() error {
// Negative values is are allowed.
if c.FeePerKb < 0 {
return fmt.Errorf("MinFeePerKb cannot be negative")
}
if c.FundingAmount < 0 {
return fmt.Errorf("FundingAmount cannot be negative")
}
// The CSV delay MUST be non-zero.
if c.CsvDelay == 0 {
return fmt.Errorf("Commitment transaction must have non-zero " +
"CSV delay")
}
// The channel derivation point must be non-nil, and have an odd
// y-coordinate.
if c.ChannelDerivationPoint == nil {
return fmt.Errorf("The channel derivation point must be non-nil")
}
//if c.ChannelDerivationPoint.Y.Bit(0) != 1 {
//return fmt.Errorf("The channel derivation point must have an odd " +
//"y-coordinate")
//}
// The delivery pkScript must be amongst the supported script
// templates.
if !isValidPkScript(c.DeliveryPkScript) {
// TODO(roasbeef): move into actual error
return fmt.Errorf("Valid delivery public key scripts MUST be: " +
"P2PKH, P2WKH, P2SH, or P2WSH.")
}
if c.DustLimit <= 0 {
return fmt.Errorf("Dust limit should be greater than zero.")
}
// We're good!
return nil
}
// String returns the string representation of the SingleFundingRequest.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingRequest) String() string {
var serializedPubkey []byte
if &c.ChannelDerivationPoint != nil && c.ChannelDerivationPoint.X != nil {
serializedPubkey = c.ChannelDerivationPoint.SerializeCompressed()
}
// TODO(roasbeef): remove string methods?
return fmt.Sprintf("\n--- Begin SingleFundingRequest ---\n") +
fmt.Sprintf("ChannelID:\t\t\t%d\n", c.ChannelID) +
fmt.Sprintf("ChannelType:\t\t\t%x\n", c.ChannelType) +
fmt.Sprintf("CoinType:\t\t\t%d\n", c.CoinType) +
fmt.Sprintf("FeePerKb:\t\t\t%s\n", c.FeePerKb.String()) +
fmt.Sprintf("FundingAmount:\t\t\t%s\n", c.FundingAmount.String()) +
fmt.Sprintf("CsvDelay:\t\t\t%d\n", c.CsvDelay) +
fmt.Sprintf("ChannelDerivationPoint:\t\t\t%x\n", serializedPubkey) +
fmt.Sprintf("DeliveryPkScript:\t\t\t%x\n", c.DeliveryPkScript) +
fmt.Sprintf("DustLimit:\t\t\t%d\n", c.DustLimit) +
fmt.Sprintf("--- End SingleFundingRequest ---\n")
}