lnd.xprv/channeldb/channel.go

1819 lines
58 KiB
Go
Raw Normal View History

package channeldb
import (
"bytes"
"encoding/binary"
"fmt"
"io"
"net"
"sync"
"github.com/boltdb/bolt"
"github.com/lightningnetwork/lnd/lnwire"
"github.com/lightningnetwork/lnd/shachain"
"github.com/roasbeef/btcd/btcec"
"github.com/roasbeef/btcd/chaincfg/chainhash"
"github.com/roasbeef/btcd/wire"
"github.com/roasbeef/btcutil"
)
var (
// closedChannelBucket stores summarization information concerning
// previously open, but now closed channels.
closedChannelBucket = []byte("closed-chan-bucket")
// openChanBucket stores all the currently open channels. This bucket
// has a second, nested bucket which is keyed by a node's ID. Within
// that node ID bucket, all attributes required to track, update, and
// close a channel are stored.
//
// openChan -> nodeID -> chanPoint
//
// TODO(roasbeef): flesh out comment
openChannelBucket = []byte("open-chan-bucket")
// chanInfoKey can be accessed within the bucket for a channel
// (identified by it's chanPoint). This key stores all the static
// information for a channel which is decided at the end of the
// funding flow.
chanInfoKey = []byte("chan-info-key")
// chanCommitmentKey can be accessed within the sub-bucket for a
// particular channel. This key stores the up to date commitment state
// for a particular channel party. Appending a 0 to the end of this key
// indicates it's the commitment for the local party, and appending a 1
// to the end of this key indicates it's the commitment for the remote
// party.
chanCommitmentKey = []byte("chan-commitment-key")
// revocationStateKey stores their current revocation hash, our
// preimage producer and their preimage store.
revocationStateKey = []byte("revocation-state-key")
// commitDiffKey stores the current pending commitment state we've
// extended to the remote party (if any). Each time we propose a new
// state, we store the information necessary to reconstruct this state
// from the prior commitment. This allows us to resync the remote party
// to their expected state in the case of message loss.
//
// TODO(roasbeef): rename to commit chain?
commitDiffKey = []byte("commit-diff-key")
// revocationLogBucket is dedicated for storing the necessary delta
// state between channel updates required to re-construct a past state
// in order to punish a counterparty attempting a non-cooperative
// channel closure. This key should be accessed from within the
// sub-bucket of a target channel, identified by its channel point.
revocationLogBucket = []byte("revocation-log-key")
)
var (
// ErrNoCommitmentsFound is returned when a channel has not set
// commitment states.
ErrNoCommitmentsFound = fmt.Errorf("no commitments found")
// ErrNoChanInfoFound is returned when a particular channel does not
// have any channels state.
ErrNoChanInfoFound = fmt.Errorf("no chan info found")
// ErrNoRevocationsFound is returned when revocation state for a
// particular channel cannot be found.
ErrNoRevocationsFound = fmt.Errorf("no revocations found")
// ErrNoPendingCommit is returned when there is not a pending
// commitment for a remote party. A new commitment is written to disk
// each time we write a new state in order to be properly fault
// tolerant.
ErrNoPendingCommit = fmt.Errorf("no pending commits found")
)
// ChannelType is an enum-like type that describes one of several possible
// channel types. Each open channel is associated with a particular type as the
// channel type may determine how higher level operations are conducted such as
// fee negotiation, channel closing, the format of HTLCs, etc.
// TODO(roasbeef): split up per-chain?
type ChannelType uint8
const (
// NOTE: iota isn't used here for this enum needs to be stable
// long-term as it will be persisted to the database.
// SingleFunder represents a channel wherein one party solely funds the
// entire capacity of the channel.
SingleFunder = 0
// DualFunder represents a channel wherein both parties contribute
// funds towards the total capacity of the channel. The channel may be
// funded symmetrically or asymmetrically.
DualFunder = 1
)
// ChannelConstraints represents a set of constraints meant to allow a node to
// limit their exposure, enact flow control and ensure that all HTLC's are
// economically relevant This struct will be mirrored for both sides of the
// channel, as each side will enforce various constraints that MUST be adhered
// to for the life time of the channel. The parameters for each of these
// constraints is static for the duration of the channel, meaning the channel
// must be teared down for them to change.
type ChannelConstraints struct {
// DustLimit is the threshold (in satoshis) below which any outputs
// should be trimmed. When an output is trimmed, it isn't materialized
// as an actual output, but is instead burned to miner's fees.
DustLimit btcutil.Amount
// MaxPendingAmount is the maximum pending HTLC value that can be
// present within the channel at a particular time. This value is set
// by the initiator of the channel and must be upheld at all times.
MaxPendingAmount lnwire.MilliSatoshi
// ChanReserve is an absolute reservation on the channel for this
// particular node. This means that the current settled balance for
// this node CANNOT dip below the reservation amount. This acts as a
// defense against costless attacks when either side no longer has any
// skin in the game.
ChanReserve btcutil.Amount
// MinHTLC is the minimum HTLC accepted for a direction of the channel.
// If any HTLC's below this amount are offered, then the HTLC will be
// rejected. This, in tandem with the dust limit allows a node to
// regulate the smallest HTLC that it deems economically relevant.
MinHTLC lnwire.MilliSatoshi
// MaxAcceptedHtlcs is the maximum amount of HTLC's that are to be
// accepted by the owner of this set of constraints. This allows each
// node to limit their over all exposure to HTLC's that may need to be
// acted upon in the case of a unilateral channel closure or a contract
// breach.
MaxAcceptedHtlcs uint16
}
// ChannelConfig is a struct that houses the various configuration opens for
// channels. Each side maintains an instance of this configuration file as it
// governs: how the funding and commitment transaction to be created, the
// nature of HTLC's allotted, the keys to be used for delivery, and relative
// time lock parameters.
type ChannelConfig struct {
// ChannelConstraints is the set of constraints that must be upheld for
// the duration of the channel for the owner of this channel
// configuration. Constraints govern a number of flow control related
// parameters, also including the smallest HTLC that will be accepted
// by a participant.
ChannelConstraints
// CsvDelay is the relative time lock delay expressed in blocks. Any
// settled outputs that pay to the owner of this channel configuration
// MUST ensure that the delay branch uses this value as the relative
// time lock. Similarly, any HTLC's offered by this node should use
// this value as well.
CsvDelay uint16
// MultiSigKey is the key to be used within the 2-of-2 output script
// for the owner of this channel config.
MultiSigKey *btcec.PublicKey
// RevocationBasePoint is the base public key to be used when deriving
// revocation keys for the remote node's commitment transaction. This
// will be combined along with a per commitment secret to derive a
// unique revocation key for each state.
RevocationBasePoint *btcec.PublicKey
// PaymentBasePoint is the base public key to be used when deriving
// the key used within the non-delayed pay-to-self output on the
// commitment transaction for a node. This will be combined with a
// tweak derived from the per-commitment point to ensure unique keys
// for each commitment transaction.
PaymentBasePoint *btcec.PublicKey
// DelayBasePoint is the base public key to be used when deriving the
// key used within the delayed pay-to-self output on the commitment
// transaction for a node. This will be combined with a tweak derived
// from the per-commitment point to ensure unique keys for each
// commitment transaction.
DelayBasePoint *btcec.PublicKey
// HtlcBasePoint is the base public key to be used when deriving the
// local HTLC key. The derived key (combined with the tweak derived
// from the per-commitment point) is used within the "to self" clause
// within any HTLC output scripts.
HtlcBasePoint *btcec.PublicKey
}
// ChannelCommitment is a snapshot of the commitment state at a particular
// point in the commitment chain. With each state transition, a snapshot of the
// current state along with all non-settled HTLCs are recorded. These snapshots
// detail the state of the _remote_ party's commitment at a particular state
// number. For ourselves (the local node) we ONLY store our most recent
// (unrevoked) state for safety purposes.
type ChannelCommitment struct {
// CommitHeight is the update number that this ChannelDelta represents
// the total number of commitment updates to this point. This can be
// viewed as sort of a "commitment height" as this number is
// monotonically increasing.
CommitHeight uint64
// LocalLogIndex is the cumulative log index index of the local node at
// this point in the commitment chain. This value will be incremented
// for each _update_ added to the local update log.
LocalLogIndex uint64
// LocalHtlcIndex is the current local running HTLC index. This value
// will be incremented for each outgoing HTLC the local node offers.
LocalHtlcIndex uint64
// RemoteLogIndex is the cumulative log index index of the remote node
// at this point in the commitment chain. This value will be
// incremented for each _update_ added to the remote update log.
RemoteLogIndex uint64
// RemoteHtlcIndex is the current remote running HTLC index. This value
// will be incremented for each outgoing HTLC the remote node offers.
RemoteHtlcIndex uint64
// LocalBalance is the current available settled balance within the
// channel directly spendable by us.
LocalBalance lnwire.MilliSatoshi
// RemoteBalance is the current available settled balance within the
// channel directly spendable by the remote node.
RemoteBalance lnwire.MilliSatoshi
// CommitFee is the amount calculated to be paid in fees for the
// current set of commitment transactions. The fee amount is persisted
// with the channel in order to allow the fee amount to be removed and
// recalculated with each channel state update, including updates that
// happen after a system restart.
CommitFee btcutil.Amount
// FeePerKw is the min satoshis/kilo-weight that should be paid within
// the commitment transaction for the entire duration of the channel's
// lifetime. This field may be updated during normal operation of the
// channel as on-chain conditions change.
FeePerKw btcutil.Amount
// CommitTx is the latest version of the commitment state, broadcast
// able by us.
CommitTx *wire.MsgTx
// CommitSig is one half of the signature required to fully complete
// the script for the commitment transaction above. This is the
// signature signed by the remote party for our version of the
// commitment transactions.
CommitSig []byte
// Htlcs is the set of HTLC's that are pending at this particular
// commitment height.
Htlcs []HTLC
// TODO(roasbeef): pending commit pointer?
// * lets just walk through
}
// OpenChannel encapsulates the persistent and dynamic state of an open channel
// with a remote node. An open channel supports several options for on-disk
// serialization depending on the exact context. Full (upon channel creation)
// state commitments, and partial (due to a commitment update) writes are
// supported. Each partial write due to a state update appends the new update
// to an on-disk log, which can then subsequently be queried in order to
// "time-travel" to a prior state.
type OpenChannel struct {
// ChanType denotes which type of channel this is.
ChanType ChannelType
// ChainHash is a hash which represents the blockchain that this
// channel will be opened within. This value is typically the genesis
// hash. In the case that the original chain went through a contentious
// hard-fork, then this value will be tweaked using the unique fork
// point on each branch.
ChainHash chainhash.Hash
// FundingOutpoint is the outpoint of the final funding transaction.
// This value uniquely and globally identities the channel within the
// target blockchain as specified by the chain hash parameter.
FundingOutpoint wire.OutPoint
// ShortChanID encodes the exact location in the chain in which the
// channel was initially confirmed. This includes: the block height,
// transaction index, and the output within the target transaction.
ShortChanID lnwire.ShortChannelID
// IsPending indicates whether a channel's funding transaction has been
// confirmed.
IsPending bool
// IsInitiator is a bool which indicates if we were the original
// initiator for the channel. This value may affect how higher levels
// negotiate fees, or close the channel.
IsInitiator bool
// IsBorked indicates that the channel has entered an irreconcilable
// state, triggered by a state desynchronization or channel breach.
// Channels in this state should never be added to the htlc switch.
IsBorked bool
// FundingBroadcastHeight is the height in which the funding
// transaction was broadcast. This value can be used by higher level
// sub-systems to determine if a channel is stale and/or should have
// been confirmed before a certain height.
FundingBroadcastHeight uint32
// NumConfsRequired is the number of confirmations a channel's funding
// transaction must have received in order to be considered available
// for normal transactional use.
NumConfsRequired uint16
// ChannelFlags holds the flags that were sent as part of the
// open_channel message.
ChannelFlags lnwire.FundingFlag
// IdentityPub is the identity public key of the remote node this
// channel has been established with.
IdentityPub *btcec.PublicKey
// Capacity is the total capacity of this channel.
Capacity btcutil.Amount
// TotalMSatSent is the total number of milli-satoshis we've sent
// within this channel.
TotalMSatSent lnwire.MilliSatoshi
// TotalMSatReceived is the total number of milli-satoshis we've
// received within this channel.
TotalMSatReceived lnwire.MilliSatoshi
// LocalChanCfg is the channel configuration for the local node.
LocalChanCfg ChannelConfig
// RemoteChanCfg is the channel configuration for the remote node.
RemoteChanCfg ChannelConfig
// LocalCommitment is the current local commitment state for the local
// party. This is stored distinct from the state of of the remote party
// as there are certain asymmetric parameters which affect the
// structure of each commitment.
LocalCommitment ChannelCommitment
// RemoteCommitment is the current remote commitment state for the
// remote party. This is stored distinct from the state of of the local
// party as there are certain asymmetric parameters which affect the
// structure of each commitment.
RemoteCommitment ChannelCommitment
// RemoteCurrentRevocation is the current revocation for their
// commitment transaction. However, since this the derived public key,
// we don't yet have the private key so we aren't yet able to verify
// that it's actually in the hash chain.
RemoteCurrentRevocation *btcec.PublicKey
// RemoteNextRevocation is the revocation key to be used for the *next*
// commitment transaction we create for the local node. Within the
// specification, this value is referred to as the
// per-commitment-point.
RemoteNextRevocation *btcec.PublicKey
// RevocationProducer is used to generate the revocation in such a way
// that remote side might store it efficiently and have the ability to
// restore the revocation by index if needed. Current implementation of
// secret producer is shachain producer.
RevocationProducer shachain.Producer
// RevocationStore is used to efficiently store the revocations for
// previous channels states sent to us by remote side. Current
// implementation of secret store is shachain store.
RevocationStore shachain.Store
// TODO(roasbeef): eww
Db *DB
// TODO(roasbeef): just need to store local and remote HTLC's?
sync.RWMutex
}
// FullSync serializes, and writes to disk the *full* channel state, using
// both the active channel bucket to store the prefixed column fields, and the
// remote node's ID to store the remainder of the channel state.
func (c *OpenChannel) FullSync() error {
c.Lock()
defer c.Unlock()
return c.Db.Update(c.fullSync)
}
// updateChanBucket is a helper function that returns a writable bucket that a
// channel's data resides in given: the public key for the node, the outpoint,
// and the chainhash that the channel resides on.
func updateChanBucket(tx *bolt.Tx, nodeKey *btcec.PublicKey,
outPoint *wire.OutPoint, chainHash chainhash.Hash) (*bolt.Bucket, error) {
// First fetch the top level bucket which stores all data related to
// current, active channels.
openChanBucket, err := tx.CreateBucketIfNotExists(openChannelBucket)
if err != nil {
return nil, err
}
// Within this top level bucket, fetch the bucket dedicated to storing
// open channel data specific to the remote node.
nodePub := nodeKey.SerializeCompressed()
nodeChanBucket, err := openChanBucket.CreateBucketIfNotExists(nodePub)
if err != nil {
return nil, err
}
// We'll then recurse down an additional layer in order to fetch the
// bucket for this particular chain.
chainBucket, err := nodeChanBucket.CreateBucketIfNotExists(chainHash[:])
if err != nil {
return nil, err
}
// With the bucket for the node fetched, we can now go down another
// level, creating the bucket (if it doesn't exist), for this channel
// itself.
var chanPointBuf bytes.Buffer
chanPointBuf.Grow(outPointSize)
if err := writeOutpoint(&chanPointBuf, outPoint); err != nil {
return nil, err
}
chanBucket, err := chainBucket.CreateBucketIfNotExists(
chanPointBuf.Bytes(),
)
if err != nil {
return nil, err
}
return chanBucket, nil
}
// readChanBucket is a helper function that returns a readable bucket that a
// channel's data resides in given: the public key for the node, the outpoint,
// and the chainhash that the channel resides on.
func readChanBucket(tx *bolt.Tx, nodeKey *btcec.PublicKey,
outPoint *wire.OutPoint, chainHash chainhash.Hash) (*bolt.Bucket, error) {
// First fetch the top level bucket which stores all data related to
// current, active channels.
openChanBucket := tx.Bucket(openChannelBucket)
if openChanBucket == nil {
return nil, ErrNoChanDBExists
}
// Within this top level bucket, fetch the bucket dedicated to storing
// open channel data specific to the remote node.
nodePub := nodeKey.SerializeCompressed()
nodeChanBucket := openChanBucket.Bucket(nodePub)
if nodeChanBucket == nil {
return nil, ErrNoActiveChannels
}
// We'll then recurse down an additional layer in order to fetch the
// bucket for this particular chain.
chainBucket := nodeChanBucket.Bucket(chainHash[:])
if chainBucket == nil {
return nil, ErrNoActiveChannels
}
// With the bucket for the node fetched, we can now go down another
// level, for this channel itself.
var chanPointBuf bytes.Buffer
chanPointBuf.Grow(outPointSize)
if err := writeOutpoint(&chanPointBuf, outPoint); err != nil {
return nil, err
}
chanBucket := chainBucket.Bucket(chanPointBuf.Bytes())
if chanBucket == nil {
return nil, ErrNoActiveChannels
}
return chanBucket, nil
}
// fullSync is an internal version of the FullSync method which allows callers
// to sync the contents of an OpenChannel while re-using an existing database
// transaction.
func (c *OpenChannel) fullSync(tx *bolt.Tx) error {
chanBucket, err := updateChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
return putOpenChannel(chanBucket, c)
}
// MarkAsOpen marks a channel as fully open given a locator that uniquely
// describes its location within the chain.
func (c *OpenChannel) MarkAsOpen(openLoc lnwire.ShortChannelID) error {
c.Lock()
defer c.Unlock()
return c.Db.Update(func(tx *bolt.Tx) error {
chanBucket, err := updateChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
channel, err := fetchOpenChannel(chanBucket, &c.FundingOutpoint)
if err != nil {
return err
}
channel.IsPending = false
channel.ShortChanID = openLoc
return putOpenChannel(chanBucket, channel)
})
}
// MarkBorked marks the event when the channel as reached an irreconcilable
// state, such as a channel breach or state desynchronization. Borked channels
// should never be added to the switch.
func (c *OpenChannel) MarkBorked() error {
c.Lock()
defer c.Unlock()
if err := c.Db.Update(func(tx *bolt.Tx) error {
chanBucket, err := updateChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
channel, err := fetchOpenChannel(chanBucket, &c.FundingOutpoint)
if err != nil {
return err
}
channel.IsBorked = true
return putOpenChannel(chanBucket, channel)
}); err != nil {
return err
}
c.IsBorked = true
return nil
}
// putChannel serializes, and stores the current state of the channel in its
// entirety.
func putOpenChannel(chanBucket *bolt.Bucket, channel *OpenChannel) error {
// First, we'll write out all the relatively static fields, that are
// decided upon initial channel creation.
if err := putChanInfo(chanBucket, channel); err != nil {
return fmt.Errorf("unable to store chan info: %v", err)
}
// With the static channel info written out, we'll now write out the
// current commitment state for both parties.
if err := putChanCommitments(chanBucket, channel); err != nil {
return fmt.Errorf("unable to store chan commitments: %v", err)
}
// Finally, we'll write out the revocation state for both parties
// within a distinct key space.
if err := putChanRevocationState(chanBucket, channel); err != nil {
return fmt.Errorf("unable to store chan revocations: %v", err)
}
return nil
}
// fetchOpenChannel retrieves, and deserializes (including decrypting
// sensitive) the complete channel currently active with the passed nodeID.
func fetchOpenChannel(chanBucket *bolt.Bucket,
chanPoint *wire.OutPoint) (*OpenChannel, error) {
channel := &OpenChannel{
FundingOutpoint: *chanPoint,
}
// First, we'll read all the static information that changes less
// frequently from disk.
if err := fetchChanInfo(chanBucket, channel); err != nil {
return nil, fmt.Errorf("unable to fetch chan info: %v", err)
}
// With the static information read, we'll now read the current
// commitment state for both sides of the channel.
if err := fetchChanCommitments(chanBucket, channel); err != nil {
return nil, fmt.Errorf("unable to fetch chan commitments: %v", err)
}
// Finally, we'll retrieve the current revocation state so we can
// properly
if err := fetchChanRevocationState(chanBucket, channel); err != nil {
return nil, fmt.Errorf("unable to fetch chan revocations: %v", err)
}
return channel, nil
}
// SyncPending writes the contents of the channel to the database while it's in
// the pending (waiting for funding confirmation) state. The IsPending flag
// will be set to true. When the channel's funding transaction is confirmed,
// the channel should be marked as "open" and the IsPending flag set to false.
// Note that this function also creates a LinkNode relationship between this
// newly created channel and a new LinkNode instance. This allows listing all
// channels in the database globally, or according to the LinkNode they were
// created with.
//
// TODO(roasbeef): addr param should eventually be a lnwire.NetAddress type
// that includes service bits.
func (c *OpenChannel) SyncPending(addr net.Addr, pendingHeight uint32) error {
c.Lock()
defer c.Unlock()
c.FundingBroadcastHeight = pendingHeight
return c.Db.Update(func(tx *bolt.Tx) error {
// First, sync all the persistent channel state to disk.
if err := c.fullSync(tx); err != nil {
return err
}
nodeInfoBucket, err := tx.CreateBucketIfNotExists(nodeInfoBucket)
if err != nil {
return err
}
// If a LinkNode for this identity public key already exists,
// then we can exit early.
nodePub := c.IdentityPub.SerializeCompressed()
if nodeInfoBucket.Get(nodePub) != nil {
return nil
}
// Next, we need to establish a (possibly) new LinkNode
// relationship for this channel. The LinkNode metadata
// contains reachability, up-time, and service bits related
// information.
linkNode := c.Db.NewLinkNode(wire.MainNet, c.IdentityPub, addr)
// TODO(roasbeef): do away with link node all together?
return putLinkNode(nodeInfoBucket, linkNode)
})
}
// UpdateCommitment updates the commitment state for the specified party
// (remote or local). The commitment stat completely describes the balance
// state at this point in the commitment chain. This method its to be called on
// two occasions: when we revoke our prior commitment state, and when the
// remote party revokes their prior commitment state.
func (c *OpenChannel) UpdateCommitment(newCommitment *ChannelCommitment) error {
c.Lock()
defer c.Unlock()
err := c.Db.Update(func(tx *bolt.Tx) error {
chanBucket, err := updateChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
if err = putChanInfo(chanBucket, c); err != nil {
return fmt.Errorf("unable to store chan info: %v", err)
}
// With the proper bucket fetched, we'll now write toe latest
// commitment state to dis for the target party.
err = putChanCommitment(chanBucket, newCommitment, true)
if err != nil {
return fmt.Errorf("unable to store chan "+
"revocations: %v", err)
}
return nil
})
if err != nil {
return err
}
2017-08-15 20:09:16 +03:00
c.LocalCommitment = *newCommitment
2017-08-15 20:09:16 +03:00
return nil
2017-08-15 20:09:16 +03:00
}
// HTLC is the on-disk representation of a hash time-locked contract. HTLCs are
// contained within ChannelDeltas which encode the current state of the
// commitment between state updates.
//
// TODO(roasbeef): save space by using smaller ints at tail end?
type HTLC struct {
// Signature is the signature for the second level covenant transaction
// for this HTLC. The second level transaction is a timeout tx in the
// case that this is an outgoing HTLC, and a success tx in the case
// that this is an incoming HTLC.
//
// TODO(roasbeef): make [64]byte instead?
Signature []byte
// RHash is the payment hash of the HTLC.
RHash [32]byte
// Amt is the amount of milli-satoshis this HTLC escrows.
Amt lnwire.MilliSatoshi
// RefundTimeout is the absolute timeout on the HTLC that the sender
// must wait before reclaiming the funds in limbo.
RefundTimeout uint32
// OutputIndex is the output index for this particular HTLC output
// within the commitment transaction.
OutputIndex int32
// Incoming denotes whether we're the receiver or the sender of this
// HTLC.
Incoming bool
// OnionBlob is an opaque blob which is used to complete multi-hop
// routing.
OnionBlob []byte
2017-08-15 20:09:16 +03:00
// HtlcIndex is the HTLC counter index of this active, outstanding
// HTLC. This differs from the LogIndex, as the HtlcIndex is only
// incremented for each offered HTLC, while they LogIndex is
// incremented for each update (includes settle+fail).
HtlcIndex uint64
// LogIndex is the cumulative log index of this this HTLC. This differs
// from the HtlcIndex as this will be incremented for each new log
// update added.
LogIndex uint64
}
2017-08-15 20:09:16 +03:00
// SerializeHtlcs writes out the passed set of HTLC's into the passed writer
// using the current default on-disk serialization format.
//
// NOTE: This API is NOT stable, the on-disk format will likely change in the
// future.
func SerializeHtlcs(b io.Writer, htlcs ...HTLC) error {
numHtlcs := uint16(len(htlcs))
if err := writeElement(b, numHtlcs); err != nil {
return err
}
for _, htlc := range htlcs {
if err := writeElements(b,
htlc.Signature, htlc.RHash, htlc.Amt, htlc.RefundTimeout,
htlc.OutputIndex, htlc.Incoming, htlc.OnionBlob[:],
htlc.HtlcIndex, htlc.LogIndex,
); err != nil {
return err
}
}
return nil
}
// DeserializeHtlcs attempts to read out a slice of HTLC's from the passed
// io.Reader. The bytes within the passed reader MUST have been previously
// written to using the SerializeHtlcs function.
//
// NOTE: This API is NOT stable, the on-disk format will likely change in the
// future.
func DeserializeHtlcs(r io.Reader) ([]HTLC, error) {
var numHtlcs uint16
if err := readElement(r, &numHtlcs); err != nil {
return nil, err
}
var htlcs []HTLC
if numHtlcs == 0 {
return htlcs, nil
}
htlcs = make([]HTLC, numHtlcs)
for i := uint16(0); i < numHtlcs; i++ {
if err := readElements(r,
&htlcs[i].Signature, &htlcs[i].RHash, &htlcs[i].Amt,
&htlcs[i].RefundTimeout, &htlcs[i].OutputIndex,
&htlcs[i].Incoming, &htlcs[i].OnionBlob,
&htlcs[i].HtlcIndex, &htlcs[i].LogIndex,
); err != nil {
return htlcs, err
}
}
2017-08-15 20:09:16 +03:00
return htlcs, nil
}
// Copy returns a full copy of the target HTLC.
func (h *HTLC) Copy() HTLC {
clone := HTLC{
Incoming: h.Incoming,
Amt: h.Amt,
RefundTimeout: h.RefundTimeout,
OutputIndex: h.OutputIndex,
}
copy(clone.Signature[:], h.Signature)
copy(clone.RHash[:], h.RHash[:])
return clone
}
// LogUpdate represents a pending update to the remote commitment chain. The
// log update may be an add, fail, or settle entry. We maintain this data in
// order to be able to properly retransmit our proposed
// state if necessary.
type LogUpdate struct {
// LogIndex is the log index of this proposed commitment update entry.
LogIndex uint64
// UpdateMsg is the update message that was included within the our
// local update log. The LogIndex value denotes the log index of this
// update which will be used when restoring our local update log if
// we're left with a dangling update on restart.
UpdateMsg lnwire.Message
}
// CommitDiff represents the delta needed to apply the state transition between
// two subsequent commitment states. Given state N and state N+1, one is able
// to apply the set of messages contained within the CommitDiff to N to arrive
// at state N+1. Each time a new commitment is extended, we'll write a new
// commitment (along with the full commitment state) to disk so we can
// re-transmit the state in the case of a connection loss or message drop.
type CommitDiff struct {
// ChannelCommitment is the full commitment state that one would arrive
// at by applying the set of messages contained in the UpdateDiff to
// the prior accepted commitment.
Commitment ChannelCommitment
// LogUpdates is the set of messages sent prior to the commitment state
// transition in question. Upon reconnection, if we detect that they
// don't have the commitment, then we re-send this along with the
// proper signature.
LogUpdates []LogUpdate
// CommitSig is the exact CommitSig message that should be sent after
// the set of LogUpdates above has been retransmitted. The signatures
// within this message should properly cover the new commitment state
// and also the HTLC's within the new commitment state.
CommitSig *lnwire.CommitSig
}
func serializeCommitDiff(w io.Writer, diff *CommitDiff) error {
if err := serializeChanCommit(w, &diff.Commitment); err != nil {
return err
}
if err := diff.CommitSig.Encode(w, 0); err != nil {
return err
}
numUpdates := uint16(len(diff.LogUpdates))
if err := binary.Write(w, byteOrder, numUpdates); err != nil {
return err
}
for _, diff := range diff.LogUpdates {
err := writeElements(w, diff.LogIndex, diff.UpdateMsg)
if err != nil {
return err
}
}
return nil
}
func deserializeCommitDiff(r io.Reader) (*CommitDiff, error) {
var (
d CommitDiff
err error
)
d.Commitment, err = deserializeChanCommit(r)
if err != nil {
return nil, err
}
d.CommitSig = &lnwire.CommitSig{}
if err := d.CommitSig.Decode(r, 0); err != nil {
return nil, err
}
var numUpdates uint16
if err := binary.Read(r, byteOrder, &numUpdates); err != nil {
return nil, err
}
d.LogUpdates = make([]LogUpdate, numUpdates)
for i := 0; i < int(numUpdates); i++ {
err := readElements(r,
&d.LogUpdates[i].LogIndex, &d.LogUpdates[i].UpdateMsg,
)
if err != nil {
return nil, err
}
}
return &d, nil
}
// AppendRemoteCommitChain appends a new CommitDiff to the end of the
// commitment chain for the remote party. This method is to be used once we
// have prepared a new commitment state for the remote party, but before we
// transmit it to the remote party. The contents of the argument should be
// sufficient to retransmit the updates and signature needed to reconstruct the
// state in full, in the case that we need to retransmit.
func (c *OpenChannel) AppendRemoteCommitChain(diff *CommitDiff) error {
c.Lock()
defer c.Unlock()
return c.Db.Update(func(tx *bolt.Tx) error {
// First, we'll grab the writable bucket where this channel's
// data resides.
chanBucket, err := updateChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
// TODO(roasbeef): use seqno to derive key for later LCP
// With the bucket retrieved, we'll now serialize the commit
// diff itself, and write it to disk.
var b bytes.Buffer
if err := serializeCommitDiff(&b, diff); err != nil {
2017-08-15 20:09:16 +03:00
return err
}
return chanBucket.Put(commitDiffKey, b.Bytes())
})
}
// RemoteCommitChainTip returns the "tip" of the current remote commitment
// chain. This value will be non-nil iff, we've created a new commitment for
// the remote party that they haven't yet ACK'd. In this case, their commitment
// chain will have a length of two: their current unrevoked commitment, and
// this new pending commitment. Once they revoked their prior state, we'll swap
// these pointers, causing the tip and the tail to point to the same entry.
func (c *OpenChannel) RemoteCommitChainTip() (*CommitDiff, error) {
var cd *CommitDiff
err := c.Db.View(func(tx *bolt.Tx) error {
chanBucket, err := readChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
tipBytes := chanBucket.Get(commitDiffKey)
if tipBytes == nil {
return ErrNoPendingCommit
2017-08-15 20:09:16 +03:00
}
tipReader := bytes.NewReader(tipBytes)
dcd, err := deserializeCommitDiff(tipReader)
if err != nil {
return err
}
cd = dcd
return nil
})
if err != nil {
return nil, err
}
return cd, err
}
// InsertNextRevocation inserts the _next_ commitment point (revocation) into
// the database, and also modifies the internal RemoteNextRevocation attribute
// to point to the passed key. This method is to be using during final channel
// set up, _after_ the channel has been fully confirmed.
//
// NOTE: If this method isn't called, then the target channel won't be able to
// propose new states for the commitment state of the remote party.
func (c *OpenChannel) InsertNextRevocation(revKey *btcec.PublicKey) error {
c.Lock()
defer c.Unlock()
c.RemoteNextRevocation = revKey
err := c.Db.Update(func(tx *bolt.Tx) error {
chanBucket, err := updateChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
return putChanRevocationState(chanBucket, c)
})
if err != nil {
return err
}
return nil
}
// AdvanceCommitChainTail records the new state transition within an on-disk
// append-only log which records all state transitions by the remote peer. In
// the case of an uncooperative broadcast of a prior state by the remote peer,
// this log can be consulted in order to reconstruct the state needed to
// rectify the situation. This method will add the current commitment for the
// remote party to the revocation log, and promote the current pending
// commitment to the current remove commitment.
func (c *OpenChannel) AdvanceCommitChainTail() error {
c.Lock()
defer c.Unlock()
var newRemoteCommit *ChannelCommitment
err := c.Db.Update(func(tx *bolt.Tx) error {
chanBucket, err := readChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
// Persist the latest preimage state to disk as the remote peer
// has just added to our local preimage store, and given us a
// new pending revocation key.
if err := putChanRevocationState(chanBucket, c); err != nil {
return err
}
// With the current preimage producer/store state updated,
// append a new log entry recording this the delta of this
// state transition.
//
// TODO(roasbeef): could make the deltas relative, would save
// space, but then tradeoff for more disk-seeks to recover the
// full state.
logKey := revocationLogBucket
logBucket, err := chanBucket.CreateBucketIfNotExists(logKey)
if err != nil {
return err
}
// Before we append this revoked state to the revocation log,
// we'll swap out what's currently the tail of the commit tip,
// with the current locked-in commitment for the remote party.
tipBytes := chanBucket.Get(commitDiffKey)
tipReader := bytes.NewReader(tipBytes)
newCommit, err := deserializeCommitDiff(tipReader)
if err != nil {
return err
}
err = putChanCommitment(chanBucket, &newCommit.Commitment, false)
if err != nil {
return err
}
if err := chanBucket.Delete(commitDiffKey); err != nil {
return err
}
// With the commitment pointer swapped, we can now add the
// revoked (prior) state to the revocation log.
//
// TODO(roasbeef): store less
err = appendChannelLogEntry(logBucket, &c.RemoteCommitment)
if err != nil {
return err
}
newRemoteCommit = &newCommit.Commitment
return nil
})
if err != nil {
return err
}
// With the db transaction complete, we'll swap over the in-memory
// pointer of the new remote commitment, which was previously the tip
// of the commit chain.
c.RemoteCommitment = *newRemoteCommit
return nil
}
// RevocationLogTail returns the "tail", or the end of the current revocation
// log. This entry represents the last previous state for the remote node's
// commitment chain. The ChannelDelta returned by this method will always lag
// one state behind the most current (unrevoked) state of the remote node's
// commitment chain.
func (c *OpenChannel) RevocationLogTail() (*ChannelCommitment, error) {
c.RLock()
defer c.RUnlock()
// If we haven't created any state updates yet, then we'll exit early as
// there's nothing to be found on disk in the revocation bucket.
if c.RemoteCommitment.CommitHeight == 0 {
return nil, nil
}
var commit ChannelCommitment
if err := c.Db.View(func(tx *bolt.Tx) error {
chanBucket, err := readChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
logBucket := chanBucket.Bucket(revocationLogBucket)
if logBucket == nil {
return ErrNoPastDeltas
}
// Once we have the bucket that stores the revocation log from
// this channel, we'll jump to the _last_ key in bucket. As we
// store the update number on disk in a big-endian format,
// this will retrieve the latest entry.
cursor := logBucket.Cursor()
_, tailLogEntry := cursor.Last()
logEntryReader := bytes.NewReader(tailLogEntry)
// Once we have the entry, we'll decode it into the channel
// delta pointer we created above.
var dbErr error
commit, dbErr = deserializeChanCommit(logEntryReader)
if dbErr != nil {
return dbErr
}
return nil
}); err != nil {
return nil, err
}
return &commit, nil
}
// CommitmentHeight returns the current commitment height. The commitment
// height represents the number of updates to the commitment state to data.
// This value is always monotonically increasing. This method is provided in
// order to allow multiple instances of a particular open channel to obtain a
// consistent view of the number of channel updates to data.
func (c *OpenChannel) CommitmentHeight() (uint64, error) {
c.RLock()
defer c.RUnlock()
var height uint64
err := c.Db.View(func(tx *bolt.Tx) error {
// Get the bucket dedicated to storing the metadata for open
// channels.
chanBucket, err := readChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
commit, err := fetchChanCommitment(chanBucket, true)
if err != nil {
return err
}
height = commit.CommitHeight
return nil
})
if err != nil {
return 0, nil
}
return height, nil
}
// FindPreviousState scans through the append-only log in an attempt to recover
// the previous channel state indicated by the update number. This method is
// intended to be used for obtaining the relevant data needed to claim all
// funds rightfully spendable in the case of an on-chain broadcast of the
// commitment transaction.
func (c *OpenChannel) FindPreviousState(updateNum uint64) (*ChannelCommitment, error) {
c.RLock()
defer c.RUnlock()
var commit ChannelCommitment
err := c.Db.View(func(tx *bolt.Tx) error {
chanBucket, err := readChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
logBucket := chanBucket.Bucket(revocationLogBucket)
if logBucket == nil {
return ErrNoPastDeltas
}
c, err := fetchChannelLogEntry(logBucket, updateNum)
if err != nil {
return err
}
commit = c
return nil
})
if err != nil {
return nil, err
}
return &commit, nil
}
// ClosureType is an enum like structure that details exactly _how_ a channel
// was closed. Three closure types are currently possible: cooperative, force,
// and breach.
type ClosureType uint8
const (
2017-05-05 03:44:10 +03:00
// CooperativeClose indicates that a channel has been closed
// cooperatively. This means that both channel peers were online and
// signed a new transaction paying out the settled balance of the
// contract.
CooperativeClose ClosureType = iota
2017-05-05 03:44:10 +03:00
// ForceClose indicates that one peer unilaterally broadcast their
// current commitment state on-chain.
ForceClose
2017-05-05 03:44:10 +03:00
// BreachClose indicates that one peer attempted to broadcast a prior
// _revoked_ channel state.
BreachClose
// FundingCanceled indicates that the channel never was fully opened
// before it was marked as closed in the database. This can happen if
// we or the remote fail at some point during the opening workflow, or
// we timeout waiting for the funding transaction to be confirmed.
FundingCanceled
)
// ChannelCloseSummary contains the final state of a channel at the point it
// was closed. Once a channel is closed, all the information pertaining to
// that channel within the openChannelBucket is deleted, and a compact
// summary is put in place instead.
type ChannelCloseSummary struct {
// ChanPoint is the outpoint for this channel's funding transaction,
// and is used as a unique identifier for the channel.
ChanPoint wire.OutPoint
// ShortChanID encodes the exact location in the chain in which the
// channel was initially confirmed. This includes: the block height,
// transaction index, and the output within the target transaction.
ShortChanID lnwire.ShortChannelID
// ChainHash is the hash of the genesis block that this channel resides
// within.
ChainHash chainhash.Hash
// ClosingTXID is the txid of the transaction which ultimately closed
// this channel.
ClosingTXID chainhash.Hash
// RemotePub is the public key of the remote peer that we formerly had
// a channel with.
RemotePub *btcec.PublicKey
// Capacity was the total capacity of the channel.
Capacity btcutil.Amount
// CloseHeight is the height at which the funding transaction was spent.
CloseHeight uint32
// SettledBalance is our total balance settled balance at the time of
// channel closure. This _does not_ include the sum of any outputs that
// have been time-locked as a result of the unilateral channel closure.
SettledBalance btcutil.Amount
// TimeLockedBalance is the sum of all the time-locked outputs at the
// time of channel closure. If we triggered the force closure of this
// channel, then this value will be non-zero if our settled output is
// above the dust limit. If we were on the receiving side of a channel
// force closure, then this value will be non-zero if we had any
// outstanding outgoing HTLC's at the time of channel closure.
TimeLockedBalance btcutil.Amount
// CloseType details exactly _how_ the channel was closed. Three
// closure types are possible: cooperative, force, and breach.
CloseType ClosureType
// IsPending indicates whether this channel is in the 'pending close'
// state, which means the channel closing transaction has been
// broadcast, but not confirmed yet or has not yet been fully resolved.
// In the case of a channel that has been cooperatively closed, it will
// no longer be considered pending as soon as the closing transaction
// has been confirmed. However, for channel that have been force
// closed, they'll stay marked as "pending" until _all_ the pending
// funds have been swept.
IsPending bool
}
// CloseChannel closes a previously active Lightning channel. Closing a channel
// entails deleting all saved state within the database concerning this
// channel. This method also takes a struct that summarizes the state of the
// channel at closing, this compact representation will be the only component
// of a channel left over after a full closing.
func (c *OpenChannel) CloseChannel(summary *ChannelCloseSummary) error {
c.Lock()
defer c.Unlock()
return c.Db.Update(func(tx *bolt.Tx) error {
openChanBucket := tx.Bucket(openChannelBucket)
if openChanBucket == nil {
return ErrNoChanDBExists
}
nodePub := c.IdentityPub.SerializeCompressed()
nodeChanBucket := openChanBucket.Bucket(nodePub)
if nodeChanBucket == nil {
return ErrNoActiveChannels
}
chainBucket := nodeChanBucket.Bucket(c.ChainHash[:])
if chainBucket == nil {
return ErrNoActiveChannels
}
var chanPointBuf bytes.Buffer
chanPointBuf.Grow(outPointSize)
err := writeOutpoint(&chanPointBuf, &c.FundingOutpoint)
if err != nil {
return err
}
chanBucket := chainBucket.Bucket(chanPointBuf.Bytes())
if chanBucket == nil {
return ErrNoActiveChannels
}
// Now that the index to this channel has been deleted, purge
// the remaining channel metadata from the database.
err = deleteOpenChannel(chanBucket, chanPointBuf.Bytes())
if err != nil {
return err
}
// With the base channel data deleted, attempt to delete the
// information stored within the revocation log.
logBucket := chanBucket.Bucket(revocationLogBucket)
if logBucket != nil {
err := wipeChannelLogEntries(logBucket)
if err != nil {
return err
}
err = chanBucket.DeleteBucket(revocationLogBucket)
if err != nil {
return err
}
}
err = chainBucket.DeleteBucket(chanPointBuf.Bytes())
if err != nil {
return err
}
// Finally, create a summary of this channel in the closed
// channel bucket for this node.
return putChannelCloseSummary(tx, chanPointBuf.Bytes(), summary)
})
}
// ChannelSnapshot is a frozen snapshot of the current channel state. A
// snapshot is detached from the original channel that generated it, providing
// read-only access to the current or prior state of an active channel.
//
// TODO(roasbeef): remove all together? pretty much just commitment
type ChannelSnapshot struct {
// RemoteIdentity is the identity public key of the remote node that we
// are maintaining the open channel with.
RemoteIdentity btcec.PublicKey
// ChanPoint is the outpoint that created the channel. This output is
// found within the funding transaction and uniquely identified the
// channel on the resident chain.
ChannelPoint wire.OutPoint
// ChainHash is the genesis hash of the chain that the channel resides
// within.
ChainHash chainhash.Hash
// Capacity is the total capacity of the channel.
Capacity btcutil.Amount
// TotalMSatSent is the total number of milli-satoshis we've sent
// within this channel.
TotalMSatSent lnwire.MilliSatoshi
// TotalMSatReceived is the total number of milli-satoshis we've
// received within this channel.
TotalMSatReceived lnwire.MilliSatoshi
// ChannelCommitment is the current up-to-date commitment for the
// target channel.
ChannelCommitment
}
// Snapshot returns a read-only snapshot of the current channel state. This
// snapshot includes information concerning the current settled balance within
// the channel, metadata detailing total flows, and any outstanding HTLCs.
func (c *OpenChannel) Snapshot() *ChannelSnapshot {
c.RLock()
defer c.RUnlock()
localCommit := c.LocalCommitment
snapshot := &ChannelSnapshot{
RemoteIdentity: *c.IdentityPub,
ChannelPoint: c.FundingOutpoint,
Capacity: c.Capacity,
TotalMSatSent: c.TotalMSatSent,
TotalMSatReceived: c.TotalMSatReceived,
ChainHash: c.ChainHash,
ChannelCommitment: ChannelCommitment{
LocalBalance: localCommit.LocalBalance,
RemoteBalance: localCommit.RemoteBalance,
CommitHeight: localCommit.CommitHeight,
CommitFee: localCommit.CommitFee,
},
}
// Copy over the current set of HTLCs to ensure the caller can't mutate
// our internal state.
snapshot.Htlcs = make([]HTLC, len(localCommit.Htlcs))
for i, h := range localCommit.Htlcs {
snapshot.Htlcs[i] = h.Copy()
}
return snapshot
}
// LatestCommitments returns the two latest commitments for both the local and
// remote party. These commitments are read from disk to ensure that only the
// latest fully committed state is returned. The first commitment returned is
// the local commitment, and the second returned is the remote commitment.
func (c *OpenChannel) LatestCommitments() (*ChannelCommitment, *ChannelCommitment, error) {
err := c.Db.View(func(tx *bolt.Tx) error {
chanBucket, err := readChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
return fetchChanCommitments(chanBucket, c)
})
if err != nil {
return nil, nil, err
}
return &c.LocalCommitment, &c.RemoteCommitment, nil
}
// RemoteRevocationStore returns the most up to date commitment version of the
// revocation storage tree for the remote party. This method can be used when
// acting on a possible contract breach to ensure, that the caller has the most
// up to date information required to deliver justice.
func (c *OpenChannel) RemoteRevocationStore() (shachain.Store, error) {
err := c.Db.View(func(tx *bolt.Tx) error {
chanBucket, err := readChanBucket(tx, c.IdentityPub,
&c.FundingOutpoint, c.ChainHash)
if err != nil {
return err
}
return fetchChanRevocationState(chanBucket, c)
})
if err != nil {
return nil, err
}
return c.RevocationStore, nil
}
func putChannelCloseSummary(tx *bolt.Tx, chanID []byte,
summary *ChannelCloseSummary) error {
closedChanBucket, err := tx.CreateBucketIfNotExists(closedChannelBucket)
if err != nil {
return err
}
var b bytes.Buffer
if err := serializeChannelCloseSummary(&b, summary); err != nil {
return err
}
return closedChanBucket.Put(chanID, b.Bytes())
}
func serializeChannelCloseSummary(w io.Writer, cs *ChannelCloseSummary) error {
return writeElements(w,
cs.ChanPoint, cs.ShortChanID, cs.ChainHash, cs.ClosingTXID,
cs.CloseHeight, cs.RemotePub, cs.Capacity, cs.SettledBalance,
cs.TimeLockedBalance, cs.CloseType, cs.IsPending,
)
}
func fetchChannelCloseSummary(tx *bolt.Tx,
chanID []byte) (*ChannelCloseSummary, error) {
closedChanBucket, err := tx.CreateBucketIfNotExists(closedChannelBucket)
if err != nil {
return nil, err
}
summaryBytes := closedChanBucket.Get(chanID)
if summaryBytes == nil {
return nil, fmt.Errorf("closed channel summary not found")
}
summaryReader := bytes.NewReader(summaryBytes)
return deserializeCloseChannelSummary(summaryReader)
}
func deserializeCloseChannelSummary(r io.Reader) (*ChannelCloseSummary, error) {
c := &ChannelCloseSummary{}
err := readElements(r,
&c.ChanPoint, &c.ShortChanID, &c.ChainHash, &c.ClosingTXID,
&c.CloseHeight, &c.RemotePub, &c.Capacity, &c.SettledBalance,
&c.TimeLockedBalance, &c.CloseType, &c.IsPending,
)
if err != nil {
return nil, err
}
return c, nil
}
func putChanInfo(chanBucket *bolt.Bucket, channel *OpenChannel) error {
var w bytes.Buffer
if err := writeElements(&w,
channel.ChanType, channel.ChainHash, channel.FundingOutpoint,
channel.ShortChanID, channel.IsPending, channel.IsInitiator,
channel.IsBorked, channel.FundingBroadcastHeight,
channel.NumConfsRequired, channel.ChannelFlags,
channel.IdentityPub, channel.Capacity, channel.TotalMSatSent,
channel.TotalMSatReceived,
); err != nil {
return err
}
writeChanConfig := func(b io.Writer, c *ChannelConfig) error {
return writeElements(b,
c.DustLimit, c.MaxPendingAmount, c.ChanReserve, c.MinHTLC,
c.MaxAcceptedHtlcs, c.CsvDelay, c.MultiSigKey,
c.RevocationBasePoint, c.PaymentBasePoint, c.DelayBasePoint,
c.HtlcBasePoint,
)
}
if err := writeChanConfig(&w, &channel.LocalChanCfg); err != nil {
return err
}
if err := writeChanConfig(&w, &channel.RemoteChanCfg); err != nil {
2017-08-15 20:09:16 +03:00
return err
}
return chanBucket.Put(chanInfoKey, w.Bytes())
}
func serializeChanCommit(w io.Writer, c *ChannelCommitment) error {
if err := writeElements(w,
c.CommitHeight, c.LocalLogIndex, c.LocalHtlcIndex,
c.RemoteLogIndex, c.RemoteHtlcIndex, c.LocalBalance,
c.RemoteBalance, c.CommitFee, c.FeePerKw, c.CommitTx,
c.CommitSig,
); err != nil {
2017-08-15 20:09:16 +03:00
return err
}
return SerializeHtlcs(w, c.Htlcs...)
}
func putChanCommitment(chanBucket *bolt.Bucket, c *ChannelCommitment,
local bool) error {
var commitKey []byte
if local {
commitKey = append(chanCommitmentKey, byte(0x00))
} else {
commitKey = append(chanCommitmentKey, byte(0x01))
}
var b bytes.Buffer
if err := serializeChanCommit(&b, c); err != nil {
return err
}
return chanBucket.Put(commitKey, b.Bytes())
}
func putChanCommitments(chanBucket *bolt.Bucket, channel *OpenChannel) error {
err := putChanCommitment(chanBucket, &channel.LocalCommitment, true)
if err != nil {
return err
}
return putChanCommitment(chanBucket, &channel.RemoteCommitment, false)
}
func putChanRevocationState(chanBucket *bolt.Bucket, channel *OpenChannel) error {
var b bytes.Buffer
err := writeElements(
&b, channel.RemoteCurrentRevocation, channel.RevocationProducer,
channel.RevocationStore,
)
if err != nil {
return err
}
// TODO(roasbeef): don't keep producer on disk
// If the next revocation is present, which is only the case after the
// FundingLocked message has been sent, then we'll write it to disk.
if channel.RemoteNextRevocation != nil {
err = writeElements(&b, channel.RemoteNextRevocation)
if err != nil {
return err
}
}
return chanBucket.Put(revocationStateKey, b.Bytes())
}
func fetchChanInfo(chanBucket *bolt.Bucket, channel *OpenChannel) error {
infoBytes := chanBucket.Get(chanInfoKey)
if infoBytes == nil {
return ErrNoChanInfoFound
}
r := bytes.NewReader(infoBytes)
if err := readElements(r,
&channel.ChanType, &channel.ChainHash, &channel.FundingOutpoint,
&channel.ShortChanID, &channel.IsPending, &channel.IsInitiator,
&channel.IsBorked, &channel.FundingBroadcastHeight,
&channel.NumConfsRequired, &channel.ChannelFlags,
&channel.IdentityPub, &channel.Capacity, &channel.TotalMSatSent,
&channel.TotalMSatReceived,
); err != nil {
return err
}
readChanConfig := func(b io.Reader, c *ChannelConfig) error {
return readElements(b,
&c.DustLimit, &c.MaxPendingAmount, &c.ChanReserve,
&c.MinHTLC, &c.MaxAcceptedHtlcs, &c.CsvDelay,
&c.MultiSigKey, &c.RevocationBasePoint,
&c.PaymentBasePoint, &c.DelayBasePoint,
&c.HtlcBasePoint,
)
}
if err := readChanConfig(r, &channel.LocalChanCfg); err != nil {
return err
}
if err := readChanConfig(r, &channel.RemoteChanCfg); err != nil {
return err
}
return nil
}
func deserializeChanCommit(r io.Reader) (ChannelCommitment, error) {
var c ChannelCommitment
err := readElements(r,
&c.CommitHeight, &c.LocalLogIndex, &c.LocalHtlcIndex, &c.RemoteLogIndex,
&c.RemoteHtlcIndex, &c.LocalBalance, &c.RemoteBalance,
&c.CommitFee, &c.FeePerKw, &c.CommitTx, &c.CommitSig,
)
if err != nil {
return c, err
}
c.Htlcs, err = DeserializeHtlcs(r)
if err != nil {
return c, err
}
return c, nil
}
func fetchChanCommitment(chanBucket *bolt.Bucket, local bool) (ChannelCommitment, error) {
var commitKey []byte
if local {
commitKey = append(chanCommitmentKey, byte(0x00))
} else {
commitKey = append(chanCommitmentKey, byte(0x01))
}
commitBytes := chanBucket.Get(commitKey)
if commitBytes == nil {
return ChannelCommitment{}, ErrNoCommitmentsFound
}
r := bytes.NewReader(commitBytes)
return deserializeChanCommit(r)
}
func fetchChanCommitments(chanBucket *bolt.Bucket, channel *OpenChannel) error {
var err error
channel.LocalCommitment, err = fetchChanCommitment(chanBucket, true)
if err != nil {
return err
}
channel.RemoteCommitment, err = fetchChanCommitment(chanBucket, false)
if err != nil {
return err
}
return nil
}
func fetchChanRevocationState(chanBucket *bolt.Bucket, channel *OpenChannel) error {
revBytes := chanBucket.Get(revocationStateKey)
if revBytes == nil {
return ErrNoRevocationsFound
2017-08-15 20:09:16 +03:00
}
r := bytes.NewReader(revBytes)
2017-08-15 20:09:16 +03:00
err := readElements(
r, &channel.RemoteCurrentRevocation, &channel.RevocationProducer,
&channel.RevocationStore,
)
if err != nil {
2017-08-15 20:09:16 +03:00
return err
}
// If there aren't any bytes left in the buffer, then we don't yet have
// the next remote revocation, so we can exit early here.
if r.Len() == 0 {
return nil
2017-08-15 20:09:16 +03:00
}
// Otherwise we'll read the next revocation for the remote party which
// is always the last item within the buffer.
return readElements(r, &channel.RemoteNextRevocation)
2017-08-15 20:09:16 +03:00
}
func deleteOpenChannel(chanBucket *bolt.Bucket, chanPointBytes []byte) error {
2017-08-15 20:09:16 +03:00
if err := chanBucket.Delete(chanInfoKey); err != nil {
2017-08-15 20:09:16 +03:00
return err
}
err := chanBucket.Delete(append(chanCommitmentKey, byte(0x00)))
if err != nil {
return err
}
err = chanBucket.Delete(append(chanCommitmentKey, byte(0x01)))
if err != nil {
return err
}
if err := chanBucket.Delete(revocationStateKey); err != nil {
return err
}
if diff := chanBucket.Get(commitDiffKey); diff != nil {
return chanBucket.Delete(commitDiffKey)
}
return nil
}
func makeLogKey(updateNum uint64) [8]byte {
var key [8]byte
byteOrder.PutUint64(key[:], updateNum)
return key
}
func appendChannelLogEntry(log *bolt.Bucket,
commit *ChannelCommitment) error {
var b bytes.Buffer
if err := serializeChanCommit(&b, commit); err != nil {
return err
}
logEntrykey := makeLogKey(commit.CommitHeight)
return log.Put(logEntrykey[:], b.Bytes())
}
func fetchChannelLogEntry(log *bolt.Bucket,
updateNum uint64) (ChannelCommitment, error) {
logEntrykey := makeLogKey(updateNum)
commitBytes := log.Get(logEntrykey[:])
if commitBytes == nil {
return ChannelCommitment{}, fmt.Errorf("log entry not found")
}
commitReader := bytes.NewReader(commitBytes)
return deserializeChanCommit(commitReader)
}
func wipeChannelLogEntries(log *bolt.Bucket) error {
// TODO(roasbeef): comment
logCursor := log.Cursor()
for k, _ := logCursor.First(); k != nil; k, _ = logCursor.Next() {
if err := logCursor.Delete(); err != nil {
return err
}
}
return nil
}