lnd.xprv/watchtower/wtclient/backup_task.go

297 lines
10 KiB
Go
Raw Normal View History

package wtclient
import (
"github.com/btcsuite/btcd/blockchain"
"github.com/btcsuite/btcd/btcec"
"github.com/btcsuite/btcd/txscript"
"github.com/btcsuite/btcd/wire"
"github.com/btcsuite/btcutil"
"github.com/btcsuite/btcutil/txsort"
"github.com/lightningnetwork/lnd/input"
"github.com/lightningnetwork/lnd/lnwallet"
"github.com/lightningnetwork/lnd/lnwire"
"github.com/lightningnetwork/lnd/watchtower/blob"
"github.com/lightningnetwork/lnd/watchtower/wtdb"
)
// backupTask is an internal struct for computing the justice transaction for a
// particular revoked state. A backupTask functions as a scratch pad for storing
// computing values of the transaction itself, such as the final split in
// balance if the justice transaction will give a reward to the tower. The
// backup task has three primary phases:
// 1. Init: Determines which inputs from the breach transaction will be spent,
// and the total amount contained in the inputs.
// 2. Bind: Asserts that the revoked state is eligible under a given session's
// parameters. Certain states may be ineligible due to fee rates, too little
// input amount, etc. Backup of these states can be deferred to a later time
// or session with more favorable parameters. If the session is bound
// successfully, the final session-dependent values to the justice
// transaction are solidified.
// 3. Send: Once the task is bound, it will be queued to send to a specific
// tower corresponding to the session in which it was bound. The justice
// transaction will be assembled by examining the parameters left as a
// result of the binding. After the justice transaction is signed, the
// necessary components are stripped out and encrypted before being sent to
// the tower in a StateUpdate.
type backupTask struct {
chanID lnwire.ChannelID
commitHeight uint64
breachInfo *lnwallet.BreachRetribution
// state-dependent variables
toLocalInput input.Input
toRemoteInput input.Input
totalAmt btcutil.Amount
// session-dependent variables
blobType blob.Type
outputs []*wire.TxOut
}
// newBackupTask initializes a new backupTask and populates all state-dependent
// variables.
func newBackupTask(chanID *lnwire.ChannelID,
breachInfo *lnwallet.BreachRetribution) *backupTask {
// Parse the non-dust outputs from the breach transaction,
// simultaneously computing the total amount contained in the inputs
// present. We can't compute the exact output values at this time
// since the task has not been assigned to a session, at which point
// parameters such as fee rate, number of outputs, and reward rate will
// be finalized.
var (
totalAmt int64
toLocalInput input.Input
toRemoteInput input.Input
)
// Add the sign descriptors and outputs corresponding to the to-local
// and to-remote outputs, respectively, if either input amount is
// non-dust. Note that the naming here seems reversed, but both are
// correct. For example, the to-remote output on the remote party's
// commitment is an output that pays to us. Hence the retribution refers
// to that output as local, though relative to their commitment, it is
// paying to-the-remote party (which is us).
if breachInfo.RemoteOutputSignDesc != nil {
toLocalInput = input.NewBaseInput(
&breachInfo.RemoteOutpoint,
input.CommitmentRevoke,
breachInfo.RemoteOutputSignDesc,
0,
)
totalAmt += breachInfo.RemoteOutputSignDesc.Output.Value
}
if breachInfo.LocalOutputSignDesc != nil {
toRemoteInput = input.NewBaseInput(
&breachInfo.LocalOutpoint,
input.CommitmentNoDelay,
breachInfo.LocalOutputSignDesc,
0,
)
totalAmt += breachInfo.LocalOutputSignDesc.Output.Value
}
return &backupTask{
chanID: *chanID,
commitHeight: breachInfo.RevokedStateNum,
breachInfo: breachInfo,
toLocalInput: toLocalInput,
toRemoteInput: toRemoteInput,
totalAmt: btcutil.Amount(totalAmt),
}
}
// inputs returns all non-dust inputs that we will attempt to spend from.
//
// NOTE: Ordering of the inputs is not critical as we sort the transaction with
// BIP69.
func (t *backupTask) inputs() map[wire.OutPoint]input.Input {
inputs := make(map[wire.OutPoint]input.Input)
if t.toLocalInput != nil {
inputs[*t.toLocalInput.OutPoint()] = t.toLocalInput
}
if t.toRemoteInput != nil {
inputs[*t.toRemoteInput.OutPoint()] = t.toRemoteInput
}
return inputs
}
// bindSession determines if the backupTask is compatible with the passed
// SessionInfo's policy. If no error is returned, the task has been bound to the
// session and can be queued to upload to the tower. Otherwise, the bind failed
// and should be rescheduled with a different session.
func (t *backupTask) bindSession(session *wtdb.SessionInfo,
sweepPkScript []byte) error {
// First we'll begin by deriving a weight estimate for the justice
// transaction. The final weight can be different depending on whether
// the watchtower is taking a reward.
var weightEstimate input.TxWeightEstimator
// All justice transactions have a p2wkh output paying to the victim.
weightEstimate.AddP2WKHOutput()
// Next, add the contribution from the inputs that are present on this
// breach transaction.
if t.toLocalInput != nil {
weightEstimate.AddWitnessInput(input.ToLocalPenaltyWitnessSize)
}
if t.toRemoteInput != nil {
weightEstimate.AddWitnessInput(input.P2WKHWitnessSize)
}
// Now, compute the output values depending on whether FlagReward is set
// in the current session's policy.
outputs, err := session.Policy.ComputeJusticeTxOuts(
t.totalAmt, int64(weightEstimate.Weight()),
sweepPkScript, session.RewardAddress,
)
if err != nil {
return err
}
t.outputs = outputs
t.blobType = session.Policy.BlobType
return nil
}
// craftSessionPayload is the final stage for a backupTask, and generates the
// encrypted payload and breach hint that should be sent to the tower. This
// method computes the final justice transaction using the bound
// session-dependent variables, and signs the resulting transaction. The
// required pieces from signatures, witness scripts, etc are then packaged into
// a JusticeKit and encrypted using the breach transaction's key.
func (t *backupTask) craftSessionPayload(sweepPkScript []byte,
signer input.Signer) (wtdb.BreachHint, []byte, error) {
var hint wtdb.BreachHint
// First, copy over the sweep pkscript, the pubkeys used to derive the
// to-local script, and the remote CSV delay.
keyRing := t.breachInfo.KeyRing
justiceKit := &blob.JusticeKit{
SweepAddress: sweepPkScript,
RevocationPubKey: toBlobPubKey(keyRing.RevocationKey),
LocalDelayPubKey: toBlobPubKey(keyRing.DelayKey),
CSVDelay: t.breachInfo.RemoteDelay,
}
// If this commitment has an output that pays to us, copy the to-remote
// pubkey into the justice kit. This serves as the indicator to the
// tower that we expect the breaching transaction to have a non-dust
// output to spend from.
if t.toRemoteInput != nil {
justiceKit.CommitToRemotePubKey = toBlobPubKey(
keyRing.NoDelayKey,
)
}
// Now, begin construction of the justice transaction. We'll start with
// a version 2 transaction.
justiceTxn := wire.NewMsgTx(2)
// Next, add the non-dust inputs that were derived from the breach
// information. This will either be contain both the to-local and
// to-remote outputs, or only be the to-local output.
inputs := t.inputs()
for prevOutPoint := range inputs {
justiceTxn.AddTxIn(&wire.TxIn{
PreviousOutPoint: prevOutPoint,
})
}
// Add the sweep output paying directly to the user and possibly a
// reward output, using the outputs computed when the task was bound.
justiceTxn.TxOut = t.outputs
// Sort the justice transaction according to BIP69.
txsort.InPlaceSort(justiceTxn)
// Check that the justice transaction meets basic validity requirements
// before attempting to attach the witnesses.
btx := btcutil.NewTx(justiceTxn)
if err := blockchain.CheckTransactionSanity(btx); err != nil {
return hint, nil, err
}
// Construct a sighash cache to improve signing performance.
hashCache := txscript.NewTxSigHashes(justiceTxn)
// Since the transaction inputs could have been reordered as a result of
// the BIP69 sort, create an index mapping each prevout to it's new
// index.
inputIndex := make(map[wire.OutPoint]int)
for i, txIn := range justiceTxn.TxIn {
inputIndex[txIn.PreviousOutPoint] = i
}
// Now, iterate through the list of inputs that were initially added to
// the transaction and store the computed witness within the justice
// kit.
for _, inp := range inputs {
// Lookup the input's new post-sort position.
i := inputIndex[*inp.OutPoint()]
// Construct the full witness required to spend this input.
inputScript, err := inp.CraftInputScript(
signer, justiceTxn, hashCache, i,
)
if err != nil {
return hint, nil, err
}
// Parse the DER-encoded signature from the first position of
// the resulting witness. We trim an extra byte to remove the
// sighash flag.
witness := inputScript.Witness
rawSignature := witness[0][:len(witness[0])-1]
// Reencode the DER signature into a fixed-size 64 byte
// signature.
signature, err := lnwire.NewSigFromRawSignature(rawSignature)
if err != nil {
return hint, nil, err
}
// Finally, copy the serialized signature into the justice kit,
// using the input's witness type to select the appropriate
// field.
switch inp.WitnessType() {
case input.CommitmentRevoke:
copy(justiceKit.CommitToLocalSig[:], signature[:])
case input.CommitmentNoDelay:
copy(justiceKit.CommitToRemoteSig[:], signature[:])
}
}
// Compute the breach hint from the breach transaction id's prefix.
breachKey := t.breachInfo.BreachTransaction.TxHash()
// Then, we'll encrypt the computed justice kit using the full breach
// transaction id, which will allow the tower to recover the contents
// after the transaction is seen in the chain or mempool.
encBlob, err := justiceKit.Encrypt(breachKey[:], t.blobType)
if err != nil {
return hint, nil, err
}
// Finally, compute the breach hint, taken as the first half of the
// breach transactions txid. Once the tower sees the breach transaction
// on the network, it can use the full txid to decyrpt the blob.
hint = wtdb.NewBreachHintFromHash(&breachKey)
return hint, encBlob, nil
}
// toBlobPubKey serializes the given pubkey into a blob.PubKey that can be set
// as a field on a blob.JusticeKit.
func toBlobPubKey(pubKey *btcec.PublicKey) blob.PubKey {
var blobPubKey blob.PubKey
copy(blobPubKey[:], pubKey.SerializeCompressed())
return blobPubKey
}