lnd.xprv/htlcswitch/switch.go

1018 lines
30 KiB
Go
Raw Normal View History

package htlcswitch
import (
"sync"
"sync/atomic"
"time"
"crypto/sha256"
"github.com/davecgh/go-spew/spew"
"github.com/go-errors/errors"
"github.com/lightningnetwork/lnd/lnrpc"
"github.com/lightningnetwork/lnd/lnwallet"
"github.com/lightningnetwork/lnd/lnwire"
"github.com/roasbeef/btcd/wire"
"github.com/roasbeef/btcutil"
)
var (
// ErrChannelLinkNotFound is used when channel link hasn't been found.
ErrChannelLinkNotFound = errors.New("channel link not found")
// zeroPreimage is the empty preimage which is returned when we have
// some errors.
zeroPreimage [sha256.Size]byte
)
// pendingPayment represents the payment which made by user and waits for
// updates to be received whether the payment has been rejected or proceed
// successfully.
type pendingPayment struct {
paymentHash lnwallet.PaymentHash
amount btcutil.Amount
preimage chan [sha256.Size]byte
err chan error
// deobfuscator is an serializable entity which is used if we received
// an error, it deobfuscates the onion failure blob, and extracts the
// exact error from it.
deobfuscator Deobfuscator
}
// plexPacket encapsulates switch packet and adds error channel to receive
// error from request handler.
type plexPacket struct {
pkt *htlcPacket
err chan error
}
// ChannelCloseType is a enum which signals the type of channel closure the
// peer should execute.
type ChannelCloseType uint8
const (
// CloseRegular indicates a regular cooperative channel closure
// should be attempted.
CloseRegular ChannelCloseType = iota
// CloseBreach indicates that a channel breach has been dtected, and
// the link should immediately be marked as unavailable.
CloseBreach
)
// ChanClose represents a request which close a particular channel specified by
// its id.
type ChanClose struct {
// CloseType is a variable which signals the type of channel closure the
// peer should execute.
CloseType ChannelCloseType
// ChanPoint represent the id of the channel which should be closed.
ChanPoint *wire.OutPoint
// Updates is used by request creator to receive the notifications about
// execution of the close channel request.
Updates chan *lnrpc.CloseStatusUpdate
// Err is used by request creator to receive request execution error.
Err chan error
}
// Config defines the configuration for the service. ALL elements within the
// configuration MUST be non-nil for the service to carry out its duties.
type Config struct {
// LocalChannelClose kicks-off the workflow to execute a cooperative
// or forced unilateral closure of the channel initiated by a local
// subsystem.
LocalChannelClose func(pubKey []byte, request *ChanClose)
// UpdateTopology sends the onion error failure topology update to router
// subsystem.
UpdateTopology func(msg *lnwire.ChannelUpdate) error
}
2017-06-01 02:48:07 +03:00
// Switch is the central messaging bus for all incoming/outgoing HTLCs.
// Connected peers with active channels are treated as named interfaces which
// refer to active channels as links. A link is the switch's message
// communication point with the goroutine that manages an active channel. New
// links are registered each time a channel is created, and unregistered once
// the channel is closed. The switch manages the hand-off process for multi-hop
// HTLCs, forwarding HTLCs initiated from within the daemon, and finally
// notifies users local-systems concerning their outstanding payment requests.
type Switch struct {
started int32
shutdown int32
wg sync.WaitGroup
quit chan struct{}
// cfg is a copy of the configuration struct that the htlc switch
// service was initialized with.
cfg *Config
// pendingPayments is correspondence of user payments and its hashes,
// which is used to save the payments which made by user and notify
// them about result later.
pendingPayments map[lnwallet.PaymentHash][]*pendingPayment
pendingMutex sync.RWMutex
// circuits is storage for payment circuits which are used to
// forward the settle/fail htlc updates back to the add htlc initiator.
circuits *circuitMap
// links is a map of channel id and channel link which manages
// this channel.
linkIndex map[lnwire.ChannelID]ChannelLink
// forwardingIndex is an index which is consulted by the switch when it
// needs to locate the next hop to forward an incoming/outgoing HTLC
// update to/from.
//
// TODO(roasbeef): eventually add a NetworkHop mapping before the
// ChannelLink
forwardingIndex map[lnwire.ShortChannelID]ChannelLink
// interfaceIndex maps the compressed public key of a peer to all the
// channels that the switch maintains iwht that peer.
interfaceIndex map[[33]byte]map[ChannelLink]struct{}
// htlcPlex is the channel which all connected links use to coordinate
// the setup/teardown of Sphinx (onion routing) payment circuits.
// Active links forward any add/settle messages over this channel each
// state transition, sending new adds/settles which are fully locked
// in.
htlcPlex chan *plexPacket
// chanCloseRequests is used to transfer the channel close request to
// the channel close handler.
chanCloseRequests chan *ChanClose
// linkControl is a channel used to propagate add/remove/get htlc
// switch handler commands.
linkControl chan interface{}
}
// New creates the new instance of htlc switch.
func New(cfg Config) *Switch {
return &Switch{
cfg: &cfg,
circuits: newCircuitMap(),
linkIndex: make(map[lnwire.ChannelID]ChannelLink),
forwardingIndex: make(map[lnwire.ShortChannelID]ChannelLink),
interfaceIndex: make(map[[33]byte]map[ChannelLink]struct{}),
pendingPayments: make(map[lnwallet.PaymentHash][]*pendingPayment),
htlcPlex: make(chan *plexPacket),
chanCloseRequests: make(chan *ChanClose),
linkControl: make(chan interface{}),
quit: make(chan struct{}),
}
}
// SendHTLC is used by other subsystems which aren't belong to htlc switch
// package in order to send the htlc update.
func (s *Switch) SendHTLC(nextNode [33]byte, htlc *lnwire.UpdateAddHTLC,
deobfuscator Deobfuscator) ([sha256.Size]byte, error) {
// Create payment and add to the map of payment in order later to be
// able to retrieve it and return response to the user.
payment := &pendingPayment{
err: make(chan error, 1),
preimage: make(chan [sha256.Size]byte, 1),
paymentHash: htlc.PaymentHash,
amount: htlc.Amount,
deobfuscator: deobfuscator,
}
s.pendingMutex.Lock()
s.pendingPayments[htlc.PaymentHash] = append(
s.pendingPayments[htlc.PaymentHash], payment)
s.pendingMutex.Unlock()
// Generate and send new update packet, if error will be received on
// this stage it means that packet haven't left boundaries of our
// system and something wrong happened.
packet := newInitPacket(nextNode, htlc)
if err := s.forward(packet); err != nil {
s.removePendingPayment(payment.amount, payment.paymentHash)
return zeroPreimage, err
}
// Returns channels so that other subsystem might wait/skip the
// waiting of handling of payment.
var preimage [sha256.Size]byte
var err error
select {
case e := <-payment.err:
err = e
case <-s.quit:
return zeroPreimage, errors.New("service is shutdown")
}
select {
case p := <-payment.preimage:
preimage = p
case <-s.quit:
return zeroPreimage, errors.New("service is shutdown")
}
return preimage, err
}
// forward is used in order to find next channel link and apply htlc
// update. Also this function is used by channel links itself in order to
// forward the update after it has been included in the channel.
func (s *Switch) forward(packet *htlcPacket) error {
command := &plexPacket{
pkt: packet,
err: make(chan error, 1),
}
select {
case s.htlcPlex <- command:
case <-s.quit:
return errors.New("Htlc Switch was stopped")
}
select {
case err := <-command.err:
return err
case <-s.quit:
return errors.New("Htlc Switch was stopped")
}
}
// handleLocalDispatch is used at the start/end of the htlc update life
// cycle. At the start (1) it is used to send the htlc to the channel link
// without creation of circuit. At the end (2) it is used to notify the user
// about the result of his payment is it was successful or not.
//
// Alice Bob Carol
// o --add----> o ---add----> o
// (1)
//
// (2)
// o <-settle-- o <--settle-- o
// Alice Bob Carol
//
func (s *Switch) handleLocalDispatch(payment *pendingPayment, packet *htlcPacket) error {
switch htlc := packet.htlc.(type) {
// User have created the htlc update therefore we should find the
// appropriate channel link and send the payment over this link.
case *lnwire.UpdateAddHTLC:
// Try to find links by node destination.
links, err := s.getLinks(packet.destNode)
if err != nil {
log.Errorf("unable to find links by "+
"destination %v", err)
return errors.New(lnwire.CodeUnknownNextPeer)
}
// Try to find destination channel link with appropriate
// bandwidth.
var destination ChannelLink
for _, link := range links {
if link.Bandwidth() >= htlc.Amount {
destination = link
break
}
}
// If the channel link we're attempting to forward the update
// over has insufficient capacity, then we'll cancel the HTLC
// as the payment cannot succeed.
if destination == nil {
log.Errorf("unable to find appropriate channel link "+
"insufficient capacity, need %v", htlc.Amount)
return errors.New(lnwire.CodeTemporaryChannelFailure)
}
// Send the packet to the destination channel link which
// manages then channel.
destination.HandleSwitchPacket(packet)
return nil
// We've just received a settle update which means we can finalize
// the user payment and return successful response.
case *lnwire.UpdateFufillHTLC:
// Notify the user that his payment was
// successfully proceed.
payment.err <- nil
payment.preimage <- htlc.PaymentPreimage
s.removePendingPayment(payment.amount, payment.paymentHash)
// We've just received a fail update which means we can finalize the
// user payment and return fail response.
case *lnwire.UpdateFailHTLC:
var userErr error
// We'll attempt to fully decrypt the onion encrypted error. If
// we're unable to then we'll bail early.
failure, err := payment.deobfuscator.Deobfuscate(htlc.Reason)
if err != nil {
userErr = errors.Errorf("unable to de-obfuscate "+
"onion failure, htlc with hash(%v): %v",
payment.paymentHash[:], err)
log.Error(userErr)
} else {
// Process payment failure by updating the lightning
// network topology by using router subsystem handler.
var update *lnwire.ChannelUpdate
// Only a few error message actually contain a channel
// update message, so we'll filter out for those that
// do.
switch failure := failure.(type) {
case *lnwire.FailTemporaryChannelFailure:
update = failure.Update
case *lnwire.FailAmountBelowMinimum:
update = &failure.Update
case *lnwire.FailFeeInsufficient:
update = &failure.Update
case *lnwire.FailIncorrectCltvExpiry:
update = &failure.Update
case *lnwire.FailExpiryTooSoon:
update = &failure.Update
case *lnwire.FailChannelDisabled:
update = &failure.Update
}
// If we've been sent an error that includes an update,
// then we'll apply it to the local graph.
//
// TODO(roasbeef): instead, make all onion errors the
// error interface, and handle this within the router.
// Will allow us more flexibility w.r.t how we handle
// the error.
if update != nil {
log.Info("Received payment failure(%v), "+
"applying lightning network topology update",
failure.Code())
if err := s.cfg.UpdateTopology(update); err != nil {
log.Errorf("unable to update topology: %v", err)
}
}
userErr = errors.New(failure.Code())
}
// Notify user that his payment was discarded.
payment.err <- userErr
payment.preimage <- zeroPreimage
s.removePendingPayment(payment.amount, payment.paymentHash)
default:
return errors.New("wrong update type")
}
return nil
}
// handlePacketForward is used in cases when we need forward the htlc update
// from one channel link to another and be able to propagate the settle/fail
// updates back. This behaviour is achieved by creation of payment circuits.
func (s *Switch) handlePacketForward(packet *htlcPacket) error {
switch htlc := packet.htlc.(type) {
// Channel link forwarded us a new htlc, therefore we initiate the
// payment circuit within our internal state so we can properly forward
// the ultimate settle message back latter.
case *lnwire.UpdateAddHTLC:
source, err := s.getLinkByShortID(packet.src)
if err != nil {
err := errors.Errorf("unable to find channel link "+
"by channel point (%v): %v", packet.src, err)
log.Error(err)
return err
}
targetLink, err := s.getLinkByShortID(packet.dest)
if err != nil {
// If packet was forwarded from another channel link
// than we should notify this link that some error
// occurred.
failure := lnwire.FailUnknownNextPeer{}
reason, err := packet.obfuscator.InitialObfuscate(failure)
if err != nil {
err := errors.Errorf("unable to obfuscate "+
"error: %v", err)
log.Error(err)
return err
}
go source.HandleSwitchPacket(newFailPacket(
packet.src,
&lnwire.UpdateFailHTLC{
Reason: reason,
},
htlc.PaymentHash, 0, true,
))
err = errors.Errorf("unable to find link with "+
"destination %v", packet.dest)
log.Error(err)
return err
}
interfaceLinks, _ := s.getLinks(targetLink.Peer().PubKey())
// Try to find destination channel link with appropriate
// bandwidth.
var destination ChannelLink
for _, link := range interfaceLinks {
if link.Bandwidth() >= htlc.Amount {
destination = link
break
}
}
// If the channel link we're attempting to forward the update
// over has insufficient capacity, then we'll cancel the htlc
// as the payment cannot succeed.
if destination == nil {
// If packet was forwarded from another
// channel link than we should notify this
// link that some error occurred.
failure := lnwire.NewTemporaryChannelFailure(nil)
reason, err := packet.obfuscator.InitialObfuscate(failure)
if err != nil {
err := errors.Errorf("unable to obfuscate "+
"error: %v", err)
log.Error(err)
return err
}
go source.HandleSwitchPacket(newFailPacket(
packet.src,
&lnwire.UpdateFailHTLC{
Reason: reason,
},
htlc.PaymentHash,
0, true,
))
err = errors.Errorf("unable to find appropriate "+
"channel link insufficient capacity, need "+
"%v", htlc.Amount)
log.Error(err)
return err
}
// If packet was forwarded from another channel link than we
// should create circuit (remember the path) in order to
// forward settle/fail packet back.
if err := s.circuits.add(newPaymentCircuit(
source.ShortChanID(),
destination.ShortChanID(),
htlc.PaymentHash,
packet.obfuscator,
)); err != nil {
failure := lnwire.NewTemporaryChannelFailure(nil)
reason, err := packet.obfuscator.InitialObfuscate(failure)
if err != nil {
err := errors.Errorf("unable to obfuscate "+
"error: %v", err)
log.Error(err)
return err
}
go source.HandleSwitchPacket(newFailPacket(
packet.src,
&lnwire.UpdateFailHTLC{
Reason: reason,
},
htlc.PaymentHash, 0, true,
))
err = errors.Errorf("unable to add circuit: "+
"%v", err)
log.Error(err)
return err
}
// Send the packet to the destination channel link which
// manages the channel.
destination.HandleSwitchPacket(packet)
return nil
// We've just received a settle packet which means we can finalize the
// payment circuit by forwarding the settle msg to the channel from
// which htlc add packet was initially received.
case *lnwire.UpdateFufillHTLC, *lnwire.UpdateFailHTLC:
// Exit if we can't find and remove the active circuit to
// continue propagating the fail over.
circuit, err := s.circuits.remove(packet.payHash)
if err != nil {
err := errors.Errorf("unable to remove "+
"circuit for payment hash: %v", packet.payHash)
log.Error(err)
return err
}
// If this is failure than we need to obfuscate the error.
if htlc, ok := htlc.(*lnwire.UpdateFailHTLC); ok && !packet.isObfuscated {
htlc.Reason = circuit.Obfuscator.BackwardObfuscate(
htlc.Reason,
)
}
// Propagating settle/fail htlc back to src of add htlc packet.
source, err := s.getLinkByShortID(circuit.Src)
if err != nil {
err := errors.Errorf("unable to get source "+
"channel link to forward settle/fail htlc: %v",
err)
log.Error(err)
return err
}
log.Debugf("Closing completed onion "+
"circuit for %x: %v<->%v", packet.payHash[:],
circuit.Src, circuit.Dest)
source.HandleSwitchPacket(packet)
return nil
default:
return errors.New("wrong update type")
}
}
// CloseLink creates and sends the close channel command.
func (s *Switch) CloseLink(chanPoint *wire.OutPoint,
closeType ChannelCloseType) (chan *lnrpc.CloseStatusUpdate, chan error) {
// TODO(roasbeef) abstract out the close updates.
updateChan := make(chan *lnrpc.CloseStatusUpdate, 2)
errChan := make(chan error, 1)
command := &ChanClose{
CloseType: closeType,
ChanPoint: chanPoint,
Updates: updateChan,
Err: errChan,
}
select {
case s.chanCloseRequests <- command:
return updateChan, errChan
case <-s.quit:
errChan <- errors.New("unable close channel link, htlc " +
"switch already stopped")
close(updateChan)
return updateChan, errChan
}
}
// htlcForwarder is responsible for optimally forwarding (and possibly
// fragmenting) incoming/outgoing HTLCs amongst all active interfaces and their
// links. The duties of the forwarder are similar to that of a network switch,
// in that it facilitates multi-hop payments by acting as a central messaging
// bus. The switch communicates will active links to create, manage, and tear
// down active onion routed payments. Each active channel is modeled as
// networked device with metadata such as the available payment bandwidth, and
// total link capacity.
//
// NOTE: This MUST be run as a goroutine.
func (s *Switch) htlcForwarder() {
defer s.wg.Done()
// Remove all links once we've been signalled for shutdown.
defer func() {
for _, link := range s.linkIndex {
if err := s.removeLink(link.ChanID()); err != nil {
log.Errorf("unable to remove "+
"channel link on stop: %v", err)
}
}
}()
// TODO(roasbeef): cleared vs settled distinction
var (
totalNumUpdates uint64
totalSatSent btcutil.Amount
totalSatRecv btcutil.Amount
)
logTicker := time.NewTicker(10 * time.Second)
defer logTicker.Stop()
for {
select {
// A local close request has arrived, we'll forward this to the
// relevant link (if it exists) so the channel can be
// cooperatively closed (if possible).
case req := <-s.chanCloseRequests:
chanID := lnwire.NewChanIDFromOutPoint(req.ChanPoint)
link, ok := s.linkIndex[chanID]
if !ok {
req.Err <- errors.Errorf("channel with "+
"chan_id=%v not found", chanID[:])
continue
}
peerPub := link.Peer().PubKey()
log.Debugf("Requesting local channel close: peer=%v, "+
"chan_id=%x", link.Peer(), chanID[:])
go s.cfg.LocalChannelClose(peerPub[:], req)
// A new packet has arrived for forwarding, we'll interpret the
// packet concretely, then either forward it along, or
// interpret a return packet to a locally initialized one.
case cmd := <-s.htlcPlex:
var (
paymentHash lnwallet.PaymentHash
amount btcutil.Amount
)
// Only three types of message should be forwarded:
// add, fails, and settles. Anything else is an error.
switch m := cmd.pkt.htlc.(type) {
case *lnwire.UpdateAddHTLC:
paymentHash = m.PaymentHash
amount = m.Amount
case *lnwire.UpdateFufillHTLC, *lnwire.UpdateFailHTLC:
paymentHash = cmd.pkt.payHash
amount = cmd.pkt.amount
default:
cmd.err <- errors.New("wrong type of update")
return
}
// If we can locate this packet in our local records,
// then this means a local sub-system initiated it.
// Otherwise, this is just a packet to be forwarded, so
// we'll treat it as so.
//
// TODO(roasbeef): can fast path this
payment, err := s.findPayment(amount, paymentHash)
if err != nil {
cmd.err <- s.handlePacketForward(cmd.pkt)
} else {
cmd.err <- s.handleLocalDispatch(payment, cmd.pkt)
}
// The log ticker has fired, so we'll calculate some forwarding
// stats for the last 10 seconds to display within the logs to
// users.
case <-logTicker.C:
// First, we'll collate the current running tally of
// our forwarding stats.
prevSatSent := totalSatSent
prevSatRecv := totalSatRecv
prevNumUpdates := totalNumUpdates
var (
newNumUpdates uint64
newSatSent btcutil.Amount
newSatRecv btcutil.Amount
)
// Next, we'll run through all the registered links and
// compute their up-to-date forwarding stats.
for _, link := range s.linkIndex {
// TODO(roasbeef): when links first registered
// stats printed.
updates, sent, recv := link.Stats()
newNumUpdates += updates
newSatSent += sent
newSatRecv += recv
}
var (
diffNumUpdates uint64
diffSatSent btcutil.Amount
diffSatRecv btcutil.Amount
)
// If this is the first time we're computing these
// stats, then the diff is just the new value. We do
// this in order to avoid integer underflow issues.
if prevNumUpdates == 0 {
diffNumUpdates = newNumUpdates
diffSatSent = newSatSent
diffSatRecv = newSatRecv
} else {
diffNumUpdates = newNumUpdates - prevNumUpdates
diffSatSent = newSatSent - prevSatSent
diffSatRecv = newSatRecv - prevSatRecv
}
// If the diff of num updates is zero, then we haven't
// forwarded anything in the last 10 seconds, so we can
// skip this update.
if diffNumUpdates == 0 {
continue
}
// Otherwise, we'll log this diff, then accumulate the
// new stats into the running total.
log.Infof("Sent %v satoshis received %v satoshis "+
"in the last 10 seconds (%v tx/sec)",
int64(diffSatSent), int64(diffSatRecv),
float64(diffNumUpdates)/10)
totalNumUpdates += diffNumUpdates
totalSatSent += diffSatSent
totalSatRecv += diffSatRecv
case req := <-s.linkControl:
switch cmd := req.(type) {
case *addLinkCmd:
cmd.err <- s.addLink(cmd.link)
case *removeLinkCmd:
cmd.err <- s.removeLink(cmd.chanID)
case *getLinkCmd:
link, err := s.getLink(cmd.chanID)
cmd.done <- link
cmd.err <- err
case *getLinksCmd:
links, err := s.getLinks(cmd.peer)
cmd.done <- links
cmd.err <- err
}
case <-s.quit:
return
}
}
}
// Start starts all helper goroutines required for the operation of the switch.
func (s *Switch) Start() error {
if !atomic.CompareAndSwapInt32(&s.started, 0, 1) {
log.Warn("Htlc Switch already started")
return nil
}
log.Infof("Starting HTLC Switch")
s.wg.Add(1)
go s.htlcForwarder()
return nil
}
// Stop gracefully stops all active helper goroutines, then waits until they've
// exited.
func (s *Switch) Stop() error {
if !atomic.CompareAndSwapInt32(&s.shutdown, 0, 1) {
log.Warn("Htlc Switch already stopped")
return nil
}
log.Infof("HLTC Switch shutting down")
close(s.quit)
s.wg.Wait()
return nil
}
// addLinkCmd is a add link command wrapper, it is used to propagate handler
// parameters and return handler error.
type addLinkCmd struct {
link ChannelLink
err chan error
}
// AddLink is used to initiate the handling of the add link command. The
// request will be propagated and handled in the main goroutine.
func (s *Switch) AddLink(link ChannelLink) error {
command := &addLinkCmd{
link: link,
err: make(chan error, 1),
}
select {
case s.linkControl <- command:
return <-command.err
case <-s.quit:
return errors.New("Htlc Switch was stopped")
}
}
// addLink is used to add the newly created channel link and start use it to
// handle the channel updates.
func (s *Switch) addLink(link ChannelLink) error {
// First we'll add the link to the linkIndex which lets us quickly look
// up a channel when we need to close or register it, and the
// forwarding index which'll be used when forwarding HTLC's in the
// multi-hop setting.
s.linkIndex[link.ChanID()] = link
s.forwardingIndex[link.ShortChanID()] = link
// Next we'll add the link to the interface index so we can quickly
// look up all the channels for a particular node.
peerPub := link.Peer().PubKey()
if _, ok := s.interfaceIndex[peerPub]; !ok {
s.interfaceIndex[peerPub] = make(map[ChannelLink]struct{})
}
s.interfaceIndex[peerPub][link] = struct{}{}
if err := link.Start(); err != nil {
return err
}
log.Infof("Added channel link with chan_id=%v, short_chan_id=(%v), "+
"bandwidth=%v", link.ChanID(), spew.Sdump(link.ShortChanID()),
link.Bandwidth())
return nil
}
// getLinkCmd is a get link command wrapper, it is used to propagate handler
// parameters and return handler error.
type getLinkCmd struct {
chanID lnwire.ChannelID
err chan error
done chan ChannelLink
}
// GetLink is used to initiate the handling of the get link command. The
// request will be propagated/handled to/in the main goroutine.
func (s *Switch) GetLink(chanID lnwire.ChannelID) (ChannelLink, error) {
command := &getLinkCmd{
chanID: chanID,
err: make(chan error, 1),
done: make(chan ChannelLink, 1),
}
select {
case s.linkControl <- command:
return <-command.done, <-command.err
case <-s.quit:
return nil, errors.New("Htlc Switch was stopped")
}
}
// getLink attempts to return the link that has the specified channel ID.
func (s *Switch) getLink(chanID lnwire.ChannelID) (ChannelLink, error) {
link, ok := s.linkIndex[chanID]
if !ok {
return nil, ErrChannelLinkNotFound
}
return link, nil
}
// getLinkByShortID attempts to return the link which possesses the target
// short channel ID.
func (s *Switch) getLinkByShortID(chanID lnwire.ShortChannelID) (ChannelLink, error) {
link, ok := s.forwardingIndex[chanID]
if !ok {
return nil, ErrChannelLinkNotFound
}
return link, nil
}
// removeLinkCmd is a get link command wrapper, it is used to propagate handler
// parameters and return handler error.
type removeLinkCmd struct {
chanID lnwire.ChannelID
err chan error
}
// RemoveLink is used to initiate the handling of the remove link command. The
// request will be propagated/handled to/in the main goroutine.
func (s *Switch) RemoveLink(chanID lnwire.ChannelID) error {
command := &removeLinkCmd{
chanID: chanID,
err: make(chan error, 1),
}
select {
case s.linkControl <- command:
return <-command.err
case <-s.quit:
return errors.New("Htlc Switch was stopped")
}
}
// removeLink is used to remove and stop the channel link.
func (s *Switch) removeLink(chanID lnwire.ChannelID) error {
log.Infof("Removing channel link with ChannelID(%v)", chanID)
link, ok := s.linkIndex[chanID]
if !ok {
return ErrChannelLinkNotFound
}
// Remove the channel from channel map.
delete(s.linkIndex, chanID)
delete(s.forwardingIndex, link.ShortChanID())
// Remove the channel from channel index.
peerPub := link.Peer().PubKey()
delete(s.interfaceIndex, peerPub)
go link.Stop()
return nil
}
// getLinksCmd is a get links command wrapper, it is used to propagate handler
// parameters and return handler error.
type getLinksCmd struct {
peer [33]byte
err chan error
done chan []ChannelLink
}
2017-06-17 02:02:02 +03:00
// GetLinksByInterface fetches all the links connected to a particular node
// identified by the serialized compressed form of its public key.
func (s *Switch) GetLinksByInterface(hop [33]byte) ([]ChannelLink, error) {
command := &getLinksCmd{
peer: hop,
err: make(chan error, 1),
done: make(chan []ChannelLink, 1),
}
select {
case s.linkControl <- command:
return <-command.done, <-command.err
case <-s.quit:
return nil, errors.New("Htlc Switch was stopped")
}
}
// getLinks is function which returns the channel links of the peer by hop
// destination id.
func (s *Switch) getLinks(destination [33]byte) ([]ChannelLink, error) {
links, ok := s.interfaceIndex[destination]
if !ok {
return nil, errors.Errorf("unable to locate channel link by"+
"destination hop id %x", destination)
}
channelLinks := make([]ChannelLink, 0, len(links))
for link := range links {
channelLinks = append(channelLinks, link)
}
return channelLinks, nil
}
// removePendingPayment is the helper function which removes the pending user
// payment.
func (s *Switch) removePendingPayment(amount btcutil.Amount,
hash lnwallet.PaymentHash) error {
s.pendingMutex.Lock()
defer s.pendingMutex.Unlock()
payments, ok := s.pendingPayments[hash]
if ok {
for i, payment := range payments {
if payment.amount == amount {
// Delete without preserving order
// Google: Golang slice tricks
payments[i] = payments[len(payments)-1]
payments[len(payments)-1] = nil
s.pendingPayments[hash] = payments[:len(payments)-1]
if len(s.pendingPayments[hash]) == 0 {
delete(s.pendingPayments, hash)
}
return nil
}
}
}
return errors.Errorf("unable to remove pending payment with "+
"hash(%v) and amount(%v)", hash, amount)
}
// findPayment is the helper function which find the payment.
func (s *Switch) findPayment(amount btcutil.Amount,
hash lnwallet.PaymentHash) (*pendingPayment, error) {
s.pendingMutex.RLock()
defer s.pendingMutex.RUnlock()
payments, ok := s.pendingPayments[hash]
if ok {
for _, payment := range payments {
if payment.amount == amount {
return payment, nil
}
}
}
return nil, errors.Errorf("unable to remove pending payment with "+
"hash(%v) and amount(%v)", hash, amount)
}
// numPendingPayments is helper function which returns the overall number of
// pending user payments.
func (s *Switch) numPendingPayments() int {
var l int
for _, payments := range s.pendingPayments {
l += len(payments)
}
return l
}