lnd.xprv/chainntnfs/btcdnotify/btcd.go

972 lines
30 KiB
Go
Raw Normal View History

package btcdnotify
import (
"errors"
"fmt"
"strings"
"sync"
"sync/atomic"
"time"
"github.com/btcsuite/btcd/btcjson"
"github.com/btcsuite/btcd/chaincfg/chainhash"
"github.com/btcsuite/btcd/rpcclient"
"github.com/btcsuite/btcd/wire"
"github.com/btcsuite/btcutil"
"github.com/lightningnetwork/lnd/chainntnfs"
"github.com/lightningnetwork/lnd/queue"
)
const (
// notifierType uniquely identifies this concrete implementation of the
// ChainNotifier interface.
notifierType = "btcd"
// reorgSafetyLimit is assumed maximum depth of a chain reorganization.
// After this many confirmation, transaction confirmation info will be
// pruned.
reorgSafetyLimit = 100
)
var (
// ErrChainNotifierShuttingDown is used when we are trying to
// measure a spend notification when notifier is already stopped.
ErrChainNotifierShuttingDown = errors.New("chainntnfs: system interrupt " +
"while attempting to register for spend notification.")
)
// chainUpdate encapsulates an update to the current main chain. This struct is
// used as an element within an unbounded queue in order to avoid blocking the
// main rpc dispatch rule.
type chainUpdate struct {
blockHash *chainhash.Hash
blockHeight int32
// connected is true if this update is a new block and false if it is a
// disconnected block.
connect bool
}
// txUpdate encapsulates a transaction related notification sent from btcd to
// the registered RPC client. This struct is used as an element within an
// unbounded queue in order to avoid blocking the main rpc dispatch rule.
type txUpdate struct {
tx *btcutil.Tx
details *btcjson.BlockDetails
}
// TODO(roasbeef): generalize struct below:
// * move chans to config, allow outside callers to handle send conditions
// BtcdNotifier implements the ChainNotifier interface using btcd's websockets
// notifications. Multiple concurrent clients are supported. All notifications
// are achieved via non-blocking sends on client channels.
type BtcdNotifier struct {
confClientCounter uint64 // To be used aotmically.
spendClientCounter uint64 // To be used atomically.
epochClientCounter uint64 // To be used atomically.
started int32 // To be used atomically.
stopped int32 // To be used atomically.
chainConn *rpcclient.Client
notificationCancels chan interface{}
notificationRegistry chan interface{}
txNotifier *chainntnfs.TxNotifier
blockEpochClients map[uint64]*blockEpochRegistration
bestBlock chainntnfs.BlockEpoch
chainUpdates *queue.ConcurrentQueue
txUpdates *queue.ConcurrentQueue
// spendHintCache is a cache used to query and update the latest height
// hints for an outpoint. Each height hint represents the earliest
// height at which the outpoint could have been spent within the chain.
spendHintCache chainntnfs.SpendHintCache
// confirmHintCache is a cache used to query the latest height hints for
// a transaction. Each height hint represents the earliest height at
// which the transaction could have confirmed within the chain.
confirmHintCache chainntnfs.ConfirmHintCache
wg sync.WaitGroup
quit chan struct{}
}
// Ensure BtcdNotifier implements the ChainNotifier interface at compile time.
var _ chainntnfs.ChainNotifier = (*BtcdNotifier)(nil)
// New returns a new BtcdNotifier instance. This function assumes the btcd node
// detailed in the passed configuration is already running, and willing to
// accept new websockets clients.
func New(config *rpcclient.ConnConfig, spendHintCache chainntnfs.SpendHintCache,
confirmHintCache chainntnfs.ConfirmHintCache) (*BtcdNotifier, error) {
notifier := &BtcdNotifier{
notificationCancels: make(chan interface{}),
notificationRegistry: make(chan interface{}),
blockEpochClients: make(map[uint64]*blockEpochRegistration),
chainUpdates: queue.NewConcurrentQueue(10),
txUpdates: queue.NewConcurrentQueue(10),
spendHintCache: spendHintCache,
confirmHintCache: confirmHintCache,
quit: make(chan struct{}),
}
ntfnCallbacks := &rpcclient.NotificationHandlers{
OnBlockConnected: notifier.onBlockConnected,
OnBlockDisconnected: notifier.onBlockDisconnected,
OnRedeemingTx: notifier.onRedeemingTx,
}
// Disable connecting to btcd within the rpcclient.New method. We
// defer establishing the connection to our .Start() method.
config.DisableConnectOnNew = true
config.DisableAutoReconnect = false
chainConn, err := rpcclient.New(config, ntfnCallbacks)
if err != nil {
return nil, err
}
notifier.chainConn = chainConn
return notifier, nil
}
// Start connects to the running btcd node over websockets, registers for block
// notifications, and finally launches all related helper goroutines.
func (b *BtcdNotifier) Start() error {
// Already started?
if atomic.AddInt32(&b.started, 1) != 1 {
return nil
}
// Connect to btcd, and register for notifications on connected, and
// disconnected blocks.
if err := b.chainConn.Connect(20); err != nil {
return err
}
if err := b.chainConn.NotifyBlocks(); err != nil {
return err
}
currentHash, currentHeight, err := b.chainConn.GetBestBlock()
if err != nil {
return err
}
b.txNotifier = chainntnfs.NewTxNotifier(
uint32(currentHeight), reorgSafetyLimit, b.confirmHintCache,
b.spendHintCache,
)
b.bestBlock = chainntnfs.BlockEpoch{
Height: currentHeight,
Hash: currentHash,
}
b.chainUpdates.Start()
b.txUpdates.Start()
b.wg.Add(1)
go b.notificationDispatcher()
return nil
}
// Stop shutsdown the BtcdNotifier.
func (b *BtcdNotifier) Stop() error {
// Already shutting down?
if atomic.AddInt32(&b.stopped, 1) != 1 {
return nil
}
// Shutdown the rpc client, this gracefully disconnects from btcd, and
// cleans up all related resources.
b.chainConn.Shutdown()
close(b.quit)
b.wg.Wait()
b.chainUpdates.Stop()
b.txUpdates.Stop()
// Notify all pending clients of our shutdown by closing the related
// notification channels.
for _, epochClient := range b.blockEpochClients {
close(epochClient.cancelChan)
epochClient.wg.Wait()
close(epochClient.epochChan)
}
b.txNotifier.TearDown()
return nil
}
// onBlockConnected implements on OnBlockConnected callback for rpcclient.
// Ingesting a block updates the wallet's internal utxo state based on the
// outputs created and destroyed within each block.
func (b *BtcdNotifier) onBlockConnected(hash *chainhash.Hash, height int32, t time.Time) {
// Append this new chain update to the end of the queue of new chain
// updates.
b.chainUpdates.ChanIn() <- &chainUpdate{
blockHash: hash,
blockHeight: height,
connect: true,
}
}
// filteredBlock represents a new block which has been connected to the main
// chain. The slice of transactions will only be populated if the block
// includes a transaction that confirmed one of our watched txids, or spends
// one of the outputs currently being watched.
// TODO(halseth): this is currently used for complete blocks. Change to use
// onFilteredBlockConnected and onFilteredBlockDisconnected, making it easier
// to unify with the Neutrino implementation.
type filteredBlock struct {
hash chainhash.Hash
height uint32
txns []*btcutil.Tx
// connected is true if this update is a new block and false if it is a
// disconnected block.
connect bool
}
// onBlockDisconnected implements on OnBlockDisconnected callback for rpcclient.
func (b *BtcdNotifier) onBlockDisconnected(hash *chainhash.Hash, height int32, t time.Time) {
// Append this new chain update to the end of the queue of new chain
// updates.
b.chainUpdates.ChanIn() <- &chainUpdate{
blockHash: hash,
blockHeight: height,
connect: false,
}
}
// onRedeemingTx implements on OnRedeemingTx callback for rpcclient.
func (b *BtcdNotifier) onRedeemingTx(tx *btcutil.Tx, details *btcjson.BlockDetails) {
// Append this new transaction update to the end of the queue of new
// chain updates.
b.txUpdates.ChanIn() <- &txUpdate{tx, details}
}
// notificationDispatcher is the primary goroutine which handles client
// notification registrations, as well as notification dispatches.
func (b *BtcdNotifier) notificationDispatcher() {
out:
for {
select {
case cancelMsg := <-b.notificationCancels:
switch msg := cancelMsg.(type) {
case *epochCancel:
chainntnfs.Log.Infof("Cancelling epoch "+
"notification, epoch_id=%v", msg.epochID)
// First, we'll lookup the original
// registration in order to stop the active
// queue goroutine.
reg := b.blockEpochClients[msg.epochID]
reg.epochQueue.Stop()
// Next, close the cancel channel for this
// specific client, and wait for the client to
// exit.
close(b.blockEpochClients[msg.epochID].cancelChan)
b.blockEpochClients[msg.epochID].wg.Wait()
// Once the client has exited, we can then
// safely close the channel used to send epoch
// notifications, in order to notify any
// listeners that the intent has been
// cancelled.
close(b.blockEpochClients[msg.epochID].epochChan)
delete(b.blockEpochClients, msg.epochID)
}
case registerMsg := <-b.notificationRegistry:
switch msg := registerMsg.(type) {
case *chainntnfs.HistoricalConfDispatch:
// Look up whether the transaction is already
// included in the active chain. We'll do this
// in a goroutine to prevent blocking
// potentially long rescans.
//
// TODO(wilmer): add retry logic if rescan fails?
b.wg.Add(1)
go func() {
defer b.wg.Done()
confDetails, _, err := b.historicalConfDetails(
msg.TxID, msg.StartHeight, msg.EndHeight,
)
if err != nil {
chainntnfs.Log.Error(err)
return
}
// If the historical dispatch finished
// without error, we will invoke
// UpdateConfDetails even if none were
// found. This allows the notifier to
// begin safely updating the height hint
// cache at tip, since any pending
// rescans have now completed.
err = b.txNotifier.UpdateConfDetails(
*msg.TxID, confDetails,
)
if err != nil {
chainntnfs.Log.Error(err)
}
}()
case *blockEpochRegistration:
chainntnfs.Log.Infof("New block epoch subscription")
b.blockEpochClients[msg.epochID] = msg
if msg.bestBlock != nil {
missedBlocks, err :=
chainntnfs.GetClientMissedBlocks(
b.chainConn, msg.bestBlock,
b.bestBlock.Height, true,
)
if err != nil {
msg.errorChan <- err
continue
}
for _, block := range missedBlocks {
b.notifyBlockEpochClient(msg,
block.Height, block.Hash)
}
}
msg.errorChan <- nil
}
case item := <-b.chainUpdates.ChanOut():
update := item.(*chainUpdate)
if update.connect {
blockHeader, err :=
b.chainConn.GetBlockHeader(update.blockHash)
if err != nil {
chainntnfs.Log.Errorf("Unable to fetch "+
"block header: %v", err)
continue
}
if blockHeader.PrevBlock != *b.bestBlock.Hash {
// Handle the case where the notifier
// missed some blocks from its chain
// backend
chainntnfs.Log.Infof("Missed blocks, " +
"attempting to catch up")
newBestBlock, missedBlocks, err :=
chainntnfs.HandleMissedBlocks(
b.chainConn,
b.txNotifier,
b.bestBlock,
update.blockHeight,
true,
)
if err != nil {
// Set the bestBlock here in case
// a catch up partially completed.
b.bestBlock = newBestBlock
chainntnfs.Log.Error(err)
continue
}
for _, block := range missedBlocks {
err := b.handleBlockConnected(block)
if err != nil {
chainntnfs.Log.Error(err)
continue out
}
}
}
newBlock := chainntnfs.BlockEpoch{
Height: update.blockHeight,
Hash: update.blockHash,
}
if err := b.handleBlockConnected(newBlock); err != nil {
chainntnfs.Log.Error(err)
}
2017-12-10 21:34:49 +03:00
continue
}
if update.blockHeight != b.bestBlock.Height {
chainntnfs.Log.Infof("Missed disconnected" +
"blocks, attempting to catch up")
2017-12-10 21:34:49 +03:00
}
newBestBlock, err := chainntnfs.RewindChain(
b.chainConn, b.txNotifier, b.bestBlock,
update.blockHeight-1,
)
2017-12-10 21:34:49 +03:00
if err != nil {
chainntnfs.Log.Errorf("Unable to rewind chain "+
"from height %d to height %d: %v",
b.bestBlock.Height, update.blockHeight-1, err)
}
// Set the bestBlock here in case a chain rewind
// partially completed.
b.bestBlock = newBestBlock
case item := <-b.txUpdates.ChanOut():
newSpend := item.(*txUpdate)
// We only care about notifying on confirmed spends, so
// if this is a mempool spend, we can ignore it and wait
// for the spend to appear in on-chain.
if newSpend.details == nil {
continue
}
tx := newSpend.tx.MsgTx()
err := b.txNotifier.ProcessRelevantSpendTx(
tx, newSpend.details.Height,
)
if err != nil {
chainntnfs.Log.Errorf("Unable to process "+
"transaction %v: %v", tx.TxHash(), err)
}
case <-b.quit:
break out
}
}
b.wg.Done()
}
// historicalConfDetails looks up whether a transaction is already included in a
// block in the active chain and, if so, returns details about the confirmation.
func (b *BtcdNotifier) historicalConfDetails(txid *chainhash.Hash,
startHeight, endHeight uint32) (*chainntnfs.TxConfirmation,
chainntnfs.TxConfStatus, error) {
// We'll first attempt to retrieve the transaction using the node's
// txindex.
txConf, txStatus, err := b.confDetailsFromTxIndex(txid)
// We'll then check the status of the transaction lookup returned to
// determine whether we should proceed with any fallback methods.
switch {
// We failed querying the index for the transaction, fall back to
// scanning manually.
case err != nil:
chainntnfs.Log.Debugf("Failed getting conf details from "+
"index (%v), scanning manually", err)
return b.confDetailsManually(txid, startHeight, endHeight)
// The transaction was found within the node's mempool.
case txStatus == chainntnfs.TxFoundMempool:
// The transaction was found within the node's txindex.
case txStatus == chainntnfs.TxFoundIndex:
// The transaction was not found within the node's mempool or txindex.
case txStatus == chainntnfs.TxNotFoundIndex:
// Unexpected txStatus returned.
default:
return nil, txStatus,
fmt.Errorf("Got unexpected txConfStatus: %v", txStatus)
}
return txConf, txStatus, nil
}
// confDetailsFromTxIndex looks up whether a transaction is already included in
// a block in the active chain by using the backend node's transaction index.
// If the transaction is found its TxConfStatus is returned. If it was found in
// the mempool this will be TxFoundMempool, if it is found in a block this will
// be TxFoundIndex. Otherwise TxNotFoundIndex is returned. If the tx is found
// in a block its confirmation details are also returned.
func (b *BtcdNotifier) confDetailsFromTxIndex(txid *chainhash.Hash,
) (*chainntnfs.TxConfirmation, chainntnfs.TxConfStatus, error) {
// If the transaction has some or all of its confirmations required,
// then we may be able to dispatch it immediately.
tx, err := b.chainConn.GetRawTransactionVerbose(txid)
if err != nil {
2018-09-06 11:48:46 +03:00
// If the transaction lookup was successful, but it wasn't found
// within the index itself, then we can exit early. We'll also
// need to look at the error message returned as the error code
// is used for multiple errors.
txNotFoundErr := "No information available about transaction"
jsonErr, ok := err.(*btcjson.RPCError)
if ok && jsonErr.Code == btcjson.ErrRPCNoTxInfo &&
strings.Contains(jsonErr.Message, txNotFoundErr) {
return nil, chainntnfs.TxNotFoundIndex, nil
}
return nil, chainntnfs.TxNotFoundIndex,
fmt.Errorf("unable to query for txid %v: %v", txid, err)
}
// Make sure we actually retrieved a transaction that is included in a
// block. If not, the transaction must be unconfirmed (in the mempool),
// and we'll return TxFoundMempool together with a nil TxConfirmation.
if tx.BlockHash == "" {
return nil, chainntnfs.TxFoundMempool, nil
}
// As we need to fully populate the returned TxConfirmation struct,
// grab the block in which the transaction was confirmed so we can
// locate its exact index within the block.
blockHash, err := chainhash.NewHashFromStr(tx.BlockHash)
if err != nil {
return nil, chainntnfs.TxNotFoundIndex,
fmt.Errorf("unable to get block hash %v for "+
"historical dispatch: %v", tx.BlockHash, err)
}
block, err := b.chainConn.GetBlockVerbose(blockHash)
if err != nil {
return nil, chainntnfs.TxNotFoundIndex,
fmt.Errorf("unable to get block with hash %v for "+
"historical dispatch: %v", blockHash, err)
}
// If the block was obtained, locate the transaction's index within the
// block so we can give the subscriber full confirmation details.
targetTxidStr := txid.String()
for txIndex, txHash := range block.Tx {
if txHash == targetTxidStr {
details := &chainntnfs.TxConfirmation{
BlockHash: blockHash,
BlockHeight: uint32(block.Height),
TxIndex: uint32(txIndex),
}
return details, chainntnfs.TxFoundIndex, nil
}
}
// We return an error because we should have found the transaction
// within the block, but didn't.
return nil, chainntnfs.TxNotFoundIndex,
fmt.Errorf("unable to locate tx %v in block %v", txid,
blockHash)
}
// confDetailsManually looks up whether a transaction is already included in a
// block in the active chain by scanning the chain's blocks, starting from the
// earliest height the transaction could have been included in, to the current
// height in the chain. If the transaction is found, its confirmation details
// are returned. Otherwise, nil is returned.
func (b *BtcdNotifier) confDetailsManually(txid *chainhash.Hash, startHeight,
endHeight uint32) (*chainntnfs.TxConfirmation,
chainntnfs.TxConfStatus, error) {
targetTxidStr := txid.String()
// Begin scanning blocks at every height to determine where the
// transaction was included in.
for height := startHeight; height <= endHeight; height++ {
// Ensure we haven't been requested to shut down before
// processing the next height.
select {
case <-b.quit:
return nil, chainntnfs.TxNotFoundManually,
ErrChainNotifierShuttingDown
default:
}
blockHash, err := b.chainConn.GetBlockHash(int64(height))
if err != nil {
return nil, chainntnfs.TxNotFoundManually,
fmt.Errorf("unable to get hash from block "+
"with height %d", height)
}
// TODO: fetch the neutrino filters instead.
block, err := b.chainConn.GetBlockVerbose(blockHash)
if err != nil {
return nil, chainntnfs.TxNotFoundManually,
fmt.Errorf("unable to get block with hash "+
"%v: %v", blockHash, err)
}
for txIndex, txHash := range block.Tx {
// If we're able to find the transaction in this block,
// return its confirmation details.
if txHash == targetTxidStr {
details := &chainntnfs.TxConfirmation{
BlockHash: blockHash,
BlockHeight: height,
TxIndex: uint32(txIndex),
}
return details, chainntnfs.TxFoundManually, nil
}
}
}
// If we reach here, then we were not able to find the transaction
// within a block, so we avoid returning an error.
return nil, chainntnfs.TxNotFoundManually, nil
}
// handleBlockConnected applies a chain update for a new block. Any watched
// transactions included this block will processed to either send notifications
// now or after numConfirmations confs.
// TODO(halseth): this is reusing the neutrino notifier implementation, unify
// them.
func (b *BtcdNotifier) handleBlockConnected(epoch chainntnfs.BlockEpoch) error {
// First, we'll fetch the raw block as we'll need to gather all the
// transactions to determine whether any are relevant to our registered
// clients.
rawBlock, err := b.chainConn.GetBlock(epoch.Hash)
if err != nil {
return fmt.Errorf("unable to get block: %v", err)
}
newBlock := &filteredBlock{
hash: *epoch.Hash,
height: uint32(epoch.Height),
txns: btcutil.NewBlock(rawBlock).Transactions(),
connect: true,
}
// We'll then extend the txNotifier's height with the information of
// this new block, which will handle all of the notification logic for
// us.
err = b.txNotifier.ConnectTip(
&newBlock.hash, newBlock.height, newBlock.txns,
)
if err != nil {
return fmt.Errorf("unable to connect tip: %v", err)
}
chainntnfs.Log.Infof("New block: height=%v, sha=%v", epoch.Height,
epoch.Hash)
// Now that we've guaranteed the new block extends the txNotifier's
// current tip, we'll proceed to dispatch notifications to all of our
// registered clients whom have had notifications fulfilled. Before
// doing so, we'll make sure update our in memory state in order to
// satisfy any client requests based upon the new block.
b.bestBlock = epoch
b.notifyBlockEpochs(epoch.Height, epoch.Hash)
return b.txNotifier.NotifyHeight(uint32(epoch.Height))
}
// notifyBlockEpochs notifies all registered block epoch clients of the newly
// connected block to the main chain.
func (b *BtcdNotifier) notifyBlockEpochs(newHeight int32, newSha *chainhash.Hash) {
for _, client := range b.blockEpochClients {
b.notifyBlockEpochClient(client, newHeight, newSha)
}
}
// notifyBlockEpochClient sends a registered block epoch client a notification
// about a specific block.
func (b *BtcdNotifier) notifyBlockEpochClient(epochClient *blockEpochRegistration,
height int32, sha *chainhash.Hash) {
epoch := &chainntnfs.BlockEpoch{
Height: height,
Hash: sha,
}
select {
case epochClient.epochQueue.ChanIn() <- epoch:
case <-epochClient.cancelChan:
case <-b.quit:
}
}
2017-02-23 22:56:47 +03:00
// RegisterSpendNtfn registers an intent to be notified once the target
// outpoint has been spent by a transaction on-chain. Once a spend of the target
// outpoint has been detected, the details of the spending event will be sent
// across the 'Spend' channel. The heightHint should represent the earliest
// height in the chain where the transaction could have been spent in.
func (b *BtcdNotifier) RegisterSpendNtfn(outpoint *wire.OutPoint,
pkScript []byte, heightHint uint32) (*chainntnfs.SpendEvent, error) {
// First, we'll construct a spend notification request and hand it off
// to the txNotifier.
spendID := atomic.AddUint64(&b.spendClientCounter, 1)
cancel := func() {
b.txNotifier.CancelSpend(*outpoint, spendID)
}
ntfn := &chainntnfs.SpendNtfn{
SpendID: spendID,
OutPoint: *outpoint,
PkScript: pkScript,
Event: chainntnfs.NewSpendEvent(cancel),
HeightHint: heightHint,
}
historicalDispatch, err := b.txNotifier.RegisterSpend(ntfn)
if err != nil {
return nil, err
}
// If the txNotifier didn't return any details to perform a historical
// scan of the chain, then we can return early as there's nothing left
// for us to do.
if historicalDispatch == nil {
return ntfn.Event, nil
}
// We'll then request the backend to notify us when it has detected the
// outpoint as spent.
ops := []*wire.OutPoint{outpoint}
if err := b.chainConn.NotifySpent(ops); err != nil {
return nil, err
}
// In addition to the check above, we'll also check the backend's UTXO
// set to determine whether the outpoint has been spent. If it hasn't,
// we can return to the caller as well.
txOut, err := b.chainConn.GetTxOut(&outpoint.Hash, outpoint.Index, true)
if err != nil {
return nil, err
}
if txOut != nil {
// We'll let the txNotifier know the outpoint is still unspent
// in order to begin updating its spend hint.
err := b.txNotifier.UpdateSpendDetails(*outpoint, nil)
if err != nil {
return nil, err
}
return ntfn.Event, nil
}
// Otherwise, we'll determine when the output was spent by scanning the
// chain. We'll begin by determining where to start our historical
// rescan.
startHash, err := b.chainConn.GetBlockHash(
int64(historicalDispatch.StartHeight),
)
if err != nil {
return nil, fmt.Errorf("unable to get block hash for height "+
"%d: %v", historicalDispatch.StartHeight, err)
}
// As a minimal optimization, we'll query the backend's transaction
// index (if enabled) to determine if we have a better rescan starting
// height. We can do this as the GetRawTransaction call will return the
// hash of the block it was included in within the chain.
tx, err := b.chainConn.GetRawTransactionVerbose(&outpoint.Hash)
if err != nil {
// Avoid returning an error if the transaction was not found to
// proceed with fallback methods.
jsonErr, ok := err.(*btcjson.RPCError)
if !ok || jsonErr.Code != btcjson.ErrRPCNoTxInfo {
return nil, fmt.Errorf("unable to query for "+
"txid %v: %v", outpoint.Hash, err)
}
}
// If the transaction index was enabled, we'll use the block's hash to
// retrieve its height and check whether it provides a better starting
// point for our rescan.
if tx != nil {
// If the transaction containing the outpoint hasn't confirmed
// on-chain, then there's no need to perform a rescan.
if tx.BlockHash == "" {
return ntfn.Event, nil
}
blockHash, err := chainhash.NewHashFromStr(tx.BlockHash)
if err != nil {
return nil, err
}
blockHeader, err := b.chainConn.GetBlockHeaderVerbose(blockHash)
if err != nil {
return nil, fmt.Errorf("unable to get header for "+
"block %v: %v", blockHash, err)
}
if uint32(blockHeader.Height) > historicalDispatch.StartHeight {
startHash, err = b.chainConn.GetBlockHash(
int64(blockHeader.Height),
)
if err != nil {
return nil, fmt.Errorf("unable to get block "+
"hash for height %d: %v",
blockHeader.Height, err)
}
}
}
// In order to ensure that we don't block the caller on what may be a
// long rescan, we'll launch a new goroutine to handle the async result
// of the rescan. We purposefully prevent from adding this goroutine to
// the WaitGroup as we cannnot wait for a quit signal due to the
// asyncResult channel not being exposed.
//
// TODO(wilmer): add retry logic if rescan fails?
asyncResult := b.chainConn.RescanAsync(startHash, nil, ops)
go func() {
if rescanErr := asyncResult.Receive(); rescanErr != nil {
chainntnfs.Log.Errorf("Rescan to determine the spend "+
"details of %v failed: %v", outpoint, rescanErr)
}
}()
return ntfn.Event, nil
}
2017-02-23 22:56:47 +03:00
// RegisterConfirmationsNtfn registers a notification with BtcdNotifier
// which will be triggered once the txid reaches numConfs number of
// confirmations.
func (b *BtcdNotifier) RegisterConfirmationsNtfn(txid *chainhash.Hash, _ []byte,
numConfs, heightHint uint32) (*chainntnfs.ConfirmationEvent, error) {
// Construct a notification request for the transaction and send it to
// the main event loop.
ntfn := &chainntnfs.ConfNtfn{
ConfID: atomic.AddUint64(&b.confClientCounter, 1),
TxID: txid,
NumConfirmations: numConfs,
Event: chainntnfs.NewConfirmationEvent(numConfs),
HeightHint: heightHint,
}
chainntnfs.Log.Infof("New confirmation subscription: "+
"txid=%v, numconfs=%v", txid, numConfs)
// Register the conf notification with the TxNotifier. A non-nil value
// for `dispatch` will be returned if we are required to perform a
// manual scan for the confirmation. Otherwise the notifier will begin
// watching at tip for the transaction to confirm.
dispatch, err := b.txNotifier.RegisterConf(ntfn)
if err != nil {
return nil, err
}
if dispatch == nil {
return ntfn.Event, nil
}
select {
case b.notificationRegistry <- dispatch:
return ntfn.Event, nil
case <-b.quit:
return nil, ErrChainNotifierShuttingDown
}
}
// blockEpochRegistration represents a client's intent to receive a
// notification with each newly connected block.
type blockEpochRegistration struct {
epochID uint64
epochChan chan *chainntnfs.BlockEpoch
epochQueue *queue.ConcurrentQueue
bestBlock *chainntnfs.BlockEpoch
errorChan chan error
cancelChan chan struct{}
wg sync.WaitGroup
}
// epochCancel is a message sent to the BtcdNotifier when a client wishes to
// cancel an outstanding epoch notification that has yet to be dispatched.
type epochCancel struct {
epochID uint64
}
// RegisterBlockEpochNtfn returns a BlockEpochEvent which subscribes the
// caller to receive notifications, of each new block connected to the main
// chain. Clients have the option of passing in their best known block, which
// the notifier uses to check if they are behind on blocks and catch them up.
func (b *BtcdNotifier) RegisterBlockEpochNtfn(
bestBlock *chainntnfs.BlockEpoch) (*chainntnfs.BlockEpochEvent, error) {
reg := &blockEpochRegistration{
epochQueue: queue.NewConcurrentQueue(20),
epochChan: make(chan *chainntnfs.BlockEpoch, 20),
cancelChan: make(chan struct{}),
epochID: atomic.AddUint64(&b.epochClientCounter, 1),
bestBlock: bestBlock,
errorChan: make(chan error, 1),
}
reg.epochQueue.Start()
// Before we send the request to the main goroutine, we'll launch a new
// goroutine to proxy items added to our queue to the client itself.
// This ensures that all notifications are received *in order*.
reg.wg.Add(1)
go func() {
defer reg.wg.Done()
for {
select {
case ntfn := <-reg.epochQueue.ChanOut():
blockNtfn := ntfn.(*chainntnfs.BlockEpoch)
select {
case reg.epochChan <- blockNtfn:
case <-reg.cancelChan:
return
case <-b.quit:
return
}
case <-reg.cancelChan:
return
case <-b.quit:
return
}
}
}()
select {
case <-b.quit:
// As we're exiting before the registration could be sent,
// we'll stop the queue now ourselves.
reg.epochQueue.Stop()
return nil, errors.New("chainntnfs: system interrupt while " +
"attempting to register for block epoch notification.")
case b.notificationRegistry <- reg:
return &chainntnfs.BlockEpochEvent{
Epochs: reg.epochChan,
Cancel: func() {
cancel := &epochCancel{
epochID: reg.epochID,
}
// Submit epoch cancellation to notification dispatcher.
select {
case b.notificationCancels <- cancel:
// Cancellation is being handled, drain
// the epoch channel until it is closed
// before yielding to caller.
for {
select {
case _, ok := <-reg.epochChan:
if !ok {
return
}
case <-b.quit:
return
}
}
case <-b.quit:
}
},
}, nil
}
}