lnd.xprv/routing/router_test.go

2155 lines
64 KiB
Go
Raw Normal View History

package routing
import (
"bytes"
"fmt"
"image/color"
"math/rand"
"strings"
"testing"
"time"
"github.com/btcsuite/btcd/btcec"
"github.com/btcsuite/btcd/chaincfg/chainhash"
"github.com/btcsuite/btcd/wire"
"github.com/davecgh/go-spew/spew"
"github.com/lightningnetwork/lightning-onion"
"github.com/lightningnetwork/lnd/channeldb"
"github.com/lightningnetwork/lnd/htlcswitch"
"github.com/lightningnetwork/lnd/lnwire"
)
// defaultNumRoutes is the default value for the maximum number of routes to
// be returned by FindRoutes
const defaultNumRoutes = 10
type testCtx struct {
router *ChannelRouter
graph *channeldb.ChannelGraph
aliases map[string]*btcec.PublicKey
chain *mockChain
chainView *mockChainView
}
func (c *testCtx) RestartRouter() error {
// First, we'll reset the chainView's state as it doesn't persist the
// filter between restarts.
c.chainView.Reset()
// With the chainView reset, we'll now re-create the router itself, and
// start it.
router, err := New(Config{
Graph: c.graph,
Chain: c.chain,
ChainView: c.chainView,
SendToSwitch: func(_ lnwire.ShortChannelID,
_ *lnwire.UpdateAddHTLC, _ *sphinx.Circuit) ([32]byte, error) {
return [32]byte{}, nil
},
ChannelPruneExpiry: time.Hour * 24,
GraphPruneInterval: time.Hour * 2,
})
if err != nil {
return fmt.Errorf("unable to create router %v", err)
}
if err := router.Start(); err != nil {
return fmt.Errorf("unable to start router: %v", err)
}
// Finally, we'll swap out the pointer in the testCtx with this fresh
// instance of the router.
c.router = router
return nil
}
func copyPubKey(pub *btcec.PublicKey) *btcec.PublicKey {
return &btcec.PublicKey{
Curve: btcec.S256(),
X: pub.X,
Y: pub.Y,
}
}
func createTestCtxFromGraphInstance(startingHeight uint32, graphInstance *testGraphInstance) (
*testCtx, func(), error) {
// We'll initialize an instance of the channel router with mock
// versions of the chain and channel notifier. As we don't need to test
// any p2p functionality, the peer send and switch send messages won't
// be populated.
chain := newMockChain(startingHeight)
chainView := newMockChainView(chain)
router, err := New(Config{
Graph: graphInstance.graph,
Chain: chain,
ChainView: chainView,
SendToSwitch: func(_ lnwire.ShortChannelID,
_ *lnwire.UpdateAddHTLC, _ *sphinx.Circuit) ([32]byte, error) {
return [32]byte{}, nil
},
ChannelPruneExpiry: time.Hour * 24,
GraphPruneInterval: time.Hour * 2,
QueryBandwidth: func(e *channeldb.ChannelEdgeInfo) lnwire.MilliSatoshi {
return lnwire.NewMSatFromSatoshis(e.Capacity)
},
})
if err != nil {
return nil, nil, fmt.Errorf("unable to create router %v", err)
}
if err := router.Start(); err != nil {
return nil, nil, fmt.Errorf("unable to start router: %v", err)
}
ctx := &testCtx{
router: router,
graph: graphInstance.graph,
aliases: graphInstance.aliasMap,
chain: chain,
chainView: chainView,
}
cleanUp := func() {
ctx.router.Stop()
graphInstance.cleanUp()
}
return ctx, cleanUp, nil
}
func createTestCtxSingleNode(startingHeight uint32) (*testCtx, func(), error) {
var (
graph *channeldb.ChannelGraph
sourceNode *channeldb.LightningNode
cleanup func()
err error
)
graph, cleanup, err = makeTestGraph()
if err != nil {
return nil, nil, fmt.Errorf("unable to create test graph: %v", err)
}
sourceNode, err = createTestNode()
if err != nil {
return nil, nil, fmt.Errorf("unable to create source node: %v", err)
}
if err = graph.SetSourceNode(sourceNode); err != nil {
return nil, nil, fmt.Errorf("unable to set source node: %v", err)
}
graphInstance := &testGraphInstance{
graph: graph,
cleanUp: cleanup,
}
return createTestCtxFromGraphInstance(startingHeight, graphInstance)
}
func createTestCtxFromFile(startingHeight uint32, testGraph string) (*testCtx, func(), error) {
// We'll attempt to locate and parse out the file
// that encodes the graph that our tests should be run against.
graphInstance, err := parseTestGraph(testGraph)
if err != nil {
return nil, nil, fmt.Errorf("unable to create test graph: %v", err)
}
return createTestCtxFromGraphInstance(startingHeight, graphInstance)
}
// TestFindRoutesFeeSorting asserts that routes found by the FindRoutes method
// within the channel router are properly returned in a sorted order, with the
// lowest fee route coming first.
func TestFindRoutesFeeSorting(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// In this test we'd like to ensure proper integration of the various
// functions that are involved in path finding, and also route
// selection.
// Execute a query for all possible routes between roasbeef and luo ji.
paymentAmt := lnwire.NewMSatFromSatoshis(100)
target := ctx.aliases["luoji"]
routes, err := ctx.router.FindRoutes(
target, paymentAmt, noFeeLimit, defaultNumRoutes,
DefaultFinalCLTVDelta,
)
if err != nil {
t.Fatalf("unable to find any routes: %v", err)
}
// Exactly, two such paths should be found.
if len(routes) != 2 {
t.Fatalf("2 routes should've been selected, instead %v were: %v",
len(routes), spew.Sdump(routes))
}
// We shouldn't pay a fee for the fist route, but the second route
// should have a fee intact.
if routes[0].TotalFees != 0 {
t.Fatalf("incorrect fees for first route, expected 0 got: %v",
routes[0].TotalFees)
}
if routes[1].TotalFees == 0 {
t.Fatalf("total fees not set in second route: %v",
spew.Sdump(routes[0]))
}
// The paths should properly be ranked according to their total fee
// rate.
if routes[0].TotalFees > routes[1].TotalFees {
t.Fatalf("routes not ranked by total fee: %v",
spew.Sdump(routes))
}
}
// TestFindRoutesWithFeeLimit asserts that routes found by the FindRoutes method
// within the channel router contain a total fee less than or equal to the fee
// limit.
func TestFindRoutesWithFeeLimit(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(
startingBlockHeight, basicGraphFilePath,
)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// This test will attempt to find routes from roasbeef to sophon for 100
// satoshis with a fee limit of 10 satoshis. There are two routes from
// roasbeef to sophon:
// 1. roasbeef -> songoku -> sophon
// 2. roasbeef -> phamnuwen -> sophon
// The second route violates our fee limit, so we should only expect to
// see the first route.
target := ctx.aliases["sophon"]
paymentAmt := lnwire.NewMSatFromSatoshis(100)
feeLimit := lnwire.NewMSatFromSatoshis(10)
routes, err := ctx.router.FindRoutes(
target, paymentAmt, feeLimit, defaultNumRoutes,
DefaultFinalCLTVDelta,
)
if err != nil {
t.Fatalf("unable to find any routes: %v", err)
}
if len(routes) != 1 {
t.Fatalf("expected 1 route, got %d", len(routes))
}
if routes[0].TotalFees > feeLimit {
t.Fatalf("route exceeded fee limit: %v", spew.Sdump(routes[0]))
}
hops := routes[0].Hops
if len(hops) != 2 {
t.Fatalf("expected 2 hops, got %d", len(hops))
}
if !bytes.Equal(hops[0].PubKeyBytes[:],
ctx.aliases["songoku"].SerializeCompressed()) {
t.Fatalf("expected first hop through songoku, got %s",
getAliasFromPubKey(hops[0].PubKeyBytes[:],
ctx.aliases))
}
}
// TestSendPaymentRouteFailureFallback tests that when sending a payment, if
// one of the target routes is seen as unavailable, then the next route in the
// queue is used instead. This process should continue until either a payment
// succeeds, or all routes have been exhausted.
func TestSendPaymentRouteFailureFallback(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Craft a LightningPayment struct that'll send a payment from roasbeef
// to luo ji for 1000 satoshis, with a maximum of 1000 satoshis in fees.
var payHash [32]byte
paymentAmt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: ctx.aliases["luoji"],
Amount: paymentAmt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
sourceNode := ctx.router.selfNode
// We'll modify the SendToSwitch method that's been set within the
// router's configuration to ignore the path that has luo ji as the
// first hop. This should force the router to instead take the
// available two hop path (through satoshi).
ctx.router.cfg.SendToSwitch = func(firstHop lnwire.ShortChannelID,
_ *lnwire.UpdateAddHTLC, _ *sphinx.Circuit) ([32]byte, error) {
roasbeefLuoji := lnwire.NewShortChanIDFromInt(689530843)
if firstHop == roasbeefLuoji {
pub, err := sourceNode.PubKey()
if err != nil {
return preImage, err
}
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: pub,
// TODO(roasbeef): temp node failure should be?
FailureMessage: &lnwire.FailTemporaryChannelFailure{},
}
}
return preImage, nil
}
// Send off the payment request to the router, route through satoshi
// should've been selected as a fall back and succeeded correctly.
paymentPreImage, route, err := ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
// The route selected should have two hops
if len(route.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(route.Hops))
}
// The preimage should match up with the once created above.
if !bytes.Equal(paymentPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], paymentPreImage[:])
}
// The route should have satoshi as the first hop.
if !bytes.Equal(route.Hops[0].PubKeyBytes[:],
ctx.aliases["satoshi"].SerializeCompressed()) {
t.Fatalf("route should go through satoshi as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(route.Hops[0].PubKeyBytes[:],
ctx.aliases))
}
}
// TestChannelUpdateValidation tests that a failed payment with an associated
// channel update will only be applied to the graph when the update contains a
// valid signature.
func TestChannelUpdateValidation(t *testing.T) {
t.Parallel()
// Setup a three node network.
testChannels := []*testChannel{
symmetricTestChannel("a", "b", 100000, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
}, 1),
symmetricTestChannel("b", "c", 100000, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
}, 2),
}
testGraph, err := createTestGraphFromChannels(testChannels)
defer testGraph.cleanUp()
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromGraphInstance(startingBlockHeight,
testGraph)
defer cleanUp()
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
// Assert that the initially configured fee is retrieved correctly.
_, policy, _, err := ctx.router.GetChannelByID(
lnwire.NewShortChanIDFromInt(1))
if err != nil {
t.Fatalf("cannot retrieve channel")
}
if policy.FeeProportionalMillionths != 400 {
t.Fatalf("invalid fee")
}
// Setup a route from source a to destination c. The route will be used
// in a call to SendToRoute. SendToRoute also applies channel updates,
// but it saves us from including RequestRoute in the test scope too.
var hop1 [33]byte
copy(hop1[:], ctx.aliases["b"].SerializeCompressed())
var hop2 [33]byte
copy(hop2[:], ctx.aliases["c"].SerializeCompressed())
hops := []*Hop{
{
ChannelID: 1,
PubKeyBytes: hop1,
},
{
ChannelID: 2,
PubKeyBytes: hop2,
},
}
route, err := NewRouteFromHops(
lnwire.MilliSatoshi(10000), 100,
NewVertex(ctx.aliases["a"]), hops,
)
if err != nil {
t.Fatalf("unable to create route: %v", err)
}
// Set up a channel update message with an invalid signature to be
// returned to the sender.
var invalidSignature [64]byte
errChanUpdate := lnwire.ChannelUpdate{
Signature: invalidSignature,
FeeRate: 500,
ShortChannelID: lnwire.NewShortChanIDFromInt(1),
Timestamp: uint32(testTime.Add(time.Minute).Unix()),
}
// We'll modify the SendToSwitch method so that it simulates a failed
// payment with an error originating from the first hop of the route.
// The unsigned channel update is attached to the failure message.
ctx.router.cfg.SendToSwitch = func(firstHop lnwire.ShortChannelID,
_ *lnwire.UpdateAddHTLC, _ *sphinx.Circuit) ([32]byte, error) {
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: ctx.aliases["b"],
FailureMessage: &lnwire.FailFeeInsufficient{
Update: errChanUpdate,
},
}
}
// The payment parameter is mostly redundant in SendToRoute. Can be left
// empty for this test.
payment := &LightningPayment{}
// Send off the payment request to the router. The specified route
// should be attempted and the channel update should be received by
// router and ignored because it is missing a valid signature.
_, _, err = ctx.router.SendToRoute([]*Route{route}, payment)
if err == nil {
t.Fatalf("expected route to fail with channel update")
}
_, policy, _, err = ctx.router.GetChannelByID(
lnwire.NewShortChanIDFromInt(1))
if err != nil {
t.Fatalf("cannot retrieve channel")
}
if policy.FeeProportionalMillionths != 400 {
t.Fatalf("fee updated without valid signature")
}
// Next, add a signature to the channel update.
chanUpdateMsg, err := errChanUpdate.DataToSign()
if err != nil {
t.Fatal(err)
}
digest := chainhash.DoubleHashB(chanUpdateMsg)
sig, err := testGraph.privKeyMap["b"].Sign(digest)
if err != nil {
t.Fatal(err)
}
errChanUpdate.Signature, err = lnwire.NewSigFromSignature(sig)
if err != nil {
t.Fatal(err)
}
// Retry the payment using the same route as before.
_, _, err = ctx.router.SendToRoute([]*Route{route}, payment)
if err == nil {
t.Fatalf("expected route to fail with channel update")
}
// This time a valid signature was supplied and the policy change should
// have been applied to the graph.
_, policy, _, err = ctx.router.GetChannelByID(
lnwire.NewShortChanIDFromInt(1))
if err != nil {
t.Fatalf("cannot retrieve channel")
}
if policy.FeeProportionalMillionths != 500 {
t.Fatalf("fee not updated even though signature is valid")
}
}
// TestSendPaymentErrorRepeatedFeeInsufficient tests that if we receive
// multiple fee related errors from a channel that we're attempting to route
// through, then we'll prune the channel after the second attempt.
func TestSendPaymentErrorRepeatedFeeInsufficient(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Craft a LightningPayment struct that'll send a payment from roasbeef
// to luo ji for 100 satoshis.
var payHash [32]byte
amt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: ctx.aliases["sophon"],
Amount: amt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
// We'll also fetch the first outgoing channel edge from roasbeef to
// son goku. We'll obtain this as we'll need to to generate the
// FeeInsufficient error that we'll send back.
chanID := uint64(12345)
_, _, edgeUpateToFail, err := ctx.graph.FetchChannelEdgesByID(chanID)
if err != nil {
t.Fatalf("unable to fetch chan id: %v", err)
}
errChanUpdate := lnwire.ChannelUpdate{
ShortChannelID: lnwire.NewShortChanIDFromInt(chanID),
Timestamp: uint32(edgeUpateToFail.LastUpdate.Unix()),
MessageFlags: edgeUpateToFail.MessageFlags,
ChannelFlags: edgeUpateToFail.ChannelFlags,
TimeLockDelta: edgeUpateToFail.TimeLockDelta,
HtlcMinimumMsat: edgeUpateToFail.MinHTLC,
BaseFee: uint32(edgeUpateToFail.FeeBaseMSat),
FeeRate: uint32(edgeUpateToFail.FeeProportionalMillionths),
}
// The error will be returned by Son Goku.
sourceNode := ctx.aliases["songoku"]
// We'll now modify the SendToSwitch method to return an error for the
// outgoing channel to Son goku. This will be a fee related error, so
// it should only cause the edge to be pruned after the second attempt.
ctx.router.cfg.SendToSwitch = func(firstHop lnwire.ShortChannelID,
_ *lnwire.UpdateAddHTLC, _ *sphinx.Circuit) ([32]byte, error) {
roasbeefSongoku := lnwire.NewShortChanIDFromInt(chanID)
if firstHop == roasbeefSongoku {
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: sourceNode,
// Within our error, we'll add a channel update
// which is meant to reflect he new fee
// schedule for the node/channel.
FailureMessage: &lnwire.FailFeeInsufficient{
Update: errChanUpdate,
},
}
}
return preImage, nil
}
// Send off the payment request to the router, route through satoshi
// should've been selected as a fall back and succeeded correctly.
paymentPreImage, route, err := ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
// The route selected should have two hops
if len(route.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(route.Hops))
}
// The preimage should match up with the once created above.
if !bytes.Equal(paymentPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], paymentPreImage[:])
}
// The route should have pham nuwen as the first hop.
if !bytes.Equal(route.Hops[0].PubKeyBytes[:],
ctx.aliases["phamnuwen"].SerializeCompressed()) {
t.Fatalf("route should go through satoshi as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(route.Hops[0].PubKeyBytes[:],
ctx.aliases))
}
}
// TestSendPaymentErrorNonFinalTimeLockErrors tests that if we receive either
// an ExpiryTooSoon or a IncorrectCltvExpiry error from a node, then we prune
// that node from the available graph witin a mission control session. This
// test ensures that we'll route around errors due to nodes not knowing the
// current block height.
func TestSendPaymentErrorNonFinalTimeLockErrors(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Craft a LightningPayment struct that'll send a payment from roasbeef
// to sophon for 1k satoshis.
var payHash [32]byte
amt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: ctx.aliases["sophon"],
Amount: amt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
// We'll also fetch the first outgoing channel edge from roasbeef to
// son goku. This edge will be included in the time lock related expiry
// errors that we'll get back due to disagrements in what the current
// block height is.
chanID := uint64(12345)
roasbeefSongoku := lnwire.NewShortChanIDFromInt(chanID)
_, _, edgeUpateToFail, err := ctx.graph.FetchChannelEdgesByID(chanID)
if err != nil {
t.Fatalf("unable to fetch chan id: %v", err)
}
errChanUpdate := lnwire.ChannelUpdate{
ShortChannelID: lnwire.NewShortChanIDFromInt(chanID),
Timestamp: uint32(edgeUpateToFail.LastUpdate.Unix()),
MessageFlags: edgeUpateToFail.MessageFlags,
ChannelFlags: edgeUpateToFail.ChannelFlags,
TimeLockDelta: edgeUpateToFail.TimeLockDelta,
HtlcMinimumMsat: edgeUpateToFail.MinHTLC,
BaseFee: uint32(edgeUpateToFail.FeeBaseMSat),
FeeRate: uint32(edgeUpateToFail.FeeProportionalMillionths),
}
// The error will be returned by Son Goku.
sourceNode := ctx.aliases["songoku"]
// We'll now modify the SendToSwitch method to return an error for the
// outgoing channel to son goku. Since this is a time lock related
// error, we should fail the payment flow all together, as Goku is the
// only channel to Sophon.
ctx.router.cfg.SendToSwitch = func(firstHop lnwire.ShortChannelID,
_ *lnwire.UpdateAddHTLC, _ *sphinx.Circuit) ([32]byte, error) {
if firstHop == roasbeefSongoku {
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: sourceNode,
FailureMessage: &lnwire.FailExpiryTooSoon{
Update: errChanUpdate,
},
}
}
return preImage, nil
}
// assertExpectedPath is a helper function that asserts the returned
// route properly routes around the failure we've introduced in the
// graph.
assertExpectedPath := func(retPreImage [32]byte, route *Route) {
// The route selected should have two hops
if len(route.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(route.Hops))
}
// The preimage should match up with the once created above.
if !bytes.Equal(retPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], retPreImage[:])
}
// The route should have satoshi as the first hop.
if !bytes.Equal(route.Hops[0].PubKeyBytes[:],
ctx.aliases["phamnuwen"].SerializeCompressed()) {
t.Fatalf("route should go through phamnuwen as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(route.Hops[0].PubKeyBytes[:],
ctx.aliases))
}
}
// Send off the payment request to the router, this payment should
2018-09-06 11:48:46 +03:00
// succeed as we should actually go through Pham Nuwen in order to get
// to Sophon, even though he has higher fees.
paymentPreImage, route, err := ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
assertExpectedPath(paymentPreImage, route)
// We'll now modify the error return an IncorrectCltvExpiry error
// instead, this should result in the same behavior of roasbeef routing
// around the faulty Son Goku node.
ctx.router.cfg.SendToSwitch = func(firstHop lnwire.ShortChannelID,
_ *lnwire.UpdateAddHTLC, _ *sphinx.Circuit) ([32]byte, error) {
if firstHop == roasbeefSongoku {
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: sourceNode,
FailureMessage: &lnwire.FailIncorrectCltvExpiry{
Update: errChanUpdate,
},
}
}
return preImage, nil
}
// Once again, Roasbeef should route around Goku since they disagree
// w.r.t to the block height, and instead go through Pham Nuwen.
paymentPreImage, route, err = ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
assertExpectedPath(paymentPreImage, route)
}
// TestSendPaymentErrorPathPruning tests that the send of candidate routes
// properly gets pruned in response to ForwardingError response from the
// underlying SendToSwitch function.
func TestSendPaymentErrorPathPruning(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Craft a LightningPayment struct that'll send a payment from roasbeef
// to luo ji for 1000 satoshis, with a maximum of 1000 satoshis in fees.
var payHash [32]byte
paymentAmt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: ctx.aliases["luoji"],
Amount: paymentAmt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
sourceNode, err := ctx.graph.SourceNode()
if err != nil {
t.Fatalf("unable to fetch source node: %v", err)
}
sourcePub, err := sourceNode.PubKey()
if err != nil {
t.Fatalf("unable to fetch source node pub: %v", err)
}
roasbeefLuoji := lnwire.NewShortChanIDFromInt(689530843)
// First, we'll modify the SendToSwitch method to return an error
// indicating that the channel from roasbeef to luoji is not operable
// with an UnknownNextPeer.
//
// TODO(roasbeef): filtering should be intelligent enough so just not
// go through satoshi at all at this point.
ctx.router.cfg.SendToSwitch = func(firstHop lnwire.ShortChannelID,
_ *lnwire.UpdateAddHTLC, _ *sphinx.Circuit) ([32]byte, error) {
if firstHop == roasbeefLuoji {
// We'll first simulate an error from the first
// outgoing link to simulate the channel from luo ji to
// roasbeef not having enough capacity.
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: sourcePub,
FailureMessage: &lnwire.FailTemporaryChannelFailure{},
}
}
// Next, we'll create an error from satoshi to indicate
// that the luoji node is not longer online, which should
// prune out the rest of the routes.
roasbeefSatoshi := lnwire.NewShortChanIDFromInt(2340213491)
if firstHop == roasbeefSatoshi {
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: ctx.aliases["satoshi"],
FailureMessage: &lnwire.FailUnknownNextPeer{},
}
}
return preImage, nil
}
ctx.router.missionControl.ResetHistory()
// When we try to dispatch that payment, we should receive an error as
// both attempts should fail and cause both routes to be pruned.
_, _, err = ctx.router.SendPayment(&payment)
if err == nil {
t.Fatalf("payment didn't return error")
}
// The final error returned should also indicate that the peer wasn't
// online (the last error we returned).
if !strings.Contains(err.Error(), "UnknownNextPeer") {
t.Fatalf("expected UnknownNextPeer instead got: %v", err)
}
ctx.router.missionControl.ResetHistory()
// Next, we'll modify the SendToSwitch method to indicate that luo ji
// wasn't originally online. This should also halt the send all
// together as all paths contain luoji and he can't be reached.
ctx.router.cfg.SendToSwitch = func(firstHop lnwire.ShortChannelID,
_ *lnwire.UpdateAddHTLC, _ *sphinx.Circuit) ([32]byte, error) {
if firstHop == roasbeefLuoji {
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: sourcePub,
FailureMessage: &lnwire.FailUnknownNextPeer{},
}
}
return preImage, nil
}
// This shouldn't return an error, as we'll make a payment attempt via
// the satoshi channel based on the assumption that there might be an
// intermittent issue with the roasbeef <-> lioji channel.
paymentPreImage, route, err := ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable send payment: %v", err)
}
// This path should go: roasbeef -> satoshi -> luoji
if len(route.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(route.Hops))
}
if !bytes.Equal(paymentPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], paymentPreImage[:])
}
if !bytes.Equal(route.Hops[0].PubKeyBytes[:],
ctx.aliases["satoshi"].SerializeCompressed()) {
t.Fatalf("route should go through satoshi as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(route.Hops[0].PubKeyBytes[:],
ctx.aliases))
}
ctx.router.missionControl.ResetHistory()
// Finally, we'll modify the SendToSwitch function to indicate that the
// roasbeef -> luoji channel has insufficient capacity. This should
// again cause us to instead go via the satoshi route.
ctx.router.cfg.SendToSwitch = func(firstHop lnwire.ShortChannelID,
_ *lnwire.UpdateAddHTLC, _ *sphinx.Circuit) ([32]byte, error) {
if firstHop == roasbeefLuoji {
// We'll first simulate an error from the first
// outgoing link to simulate the channel from luo ji to
// roasbeef not having enough capacity.
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: sourcePub,
FailureMessage: &lnwire.FailTemporaryChannelFailure{},
}
}
return preImage, nil
}
paymentPreImage, route, err = ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
// This should succeed finally. The route selected should have two
// hops.
if len(route.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(route.Hops))
}
// The preimage should match up with the once created above.
if !bytes.Equal(paymentPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], paymentPreImage[:])
}
// The route should have satoshi as the first hop.
if !bytes.Equal(route.Hops[0].PubKeyBytes[:],
ctx.aliases["satoshi"].SerializeCompressed()) {
t.Fatalf("route should go through satoshi as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(route.Hops[0].PubKeyBytes[:],
ctx.aliases))
}
}
// TestAddProof checks that we can update the channel proof after channel
// info was added to the database.
func TestAddProof(t *testing.T) {
t.Parallel()
ctx, cleanup, err := createTestCtxSingleNode(0)
if err != nil {
t.Fatal(err)
}
defer cleanup()
// Before creating out edge, we'll create two new nodes within the
// network that the channel will connect.
node1, err := createTestNode()
if err != nil {
t.Fatal(err)
}
node2, err := createTestNode()
if err != nil {
t.Fatal(err)
}
// In order to be able to add the edge we should have a valid funding
// UTXO within the blockchain.
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(),
100, 0)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
// After utxo was recreated adding the edge without the proof.
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
AuthProof: nil,
}
copy(edge.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Now we'll attempt to update the proof and check that it has been
// properly updated.
if err := ctx.router.AddProof(*chanID, &testAuthProof); err != nil {
t.Fatalf("unable to add proof: %v", err)
}
info, _, _, err := ctx.router.GetChannelByID(*chanID)
if info.AuthProof == nil {
t.Fatal("proof have been updated")
}
}
// TestIgnoreNodeAnnouncement tests that adding a node to the router that is
// not known from any channel announcement, leads to the announcement being
// ignored.
func TestIgnoreNodeAnnouncement(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight,
basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
pub := priv1.PubKey()
node := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: time.Unix(123, 0),
Addresses: testAddrs,
Color: color.RGBA{1, 2, 3, 0},
Alias: "node11",
AuthSigBytes: testSig.Serialize(),
Features: testFeatures,
}
copy(node.PubKeyBytes[:], pub.SerializeCompressed())
err = ctx.router.AddNode(node)
if !IsError(err, ErrIgnored) {
t.Fatalf("expected to get ErrIgnore, instead got: %v", err)
}
}
// TestAddEdgeUnknownVertexes tests that if an edge is added that contains two
// vertexes which we don't know of, the edge should be available for use
// regardless. This is due to the fact that we don't actually need node
// announcements for the channel vertexes to be able to use the channel.
func TestAddEdgeUnknownVertexes(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight,
basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
var pub1 [33]byte
copy(pub1[:], priv1.PubKey().SerializeCompressed())
var pub2 [33]byte
copy(pub2[:], priv2.PubKey().SerializeCompressed())
// The two nodes we are about to add should not exist yet.
_, exists1, err := ctx.graph.HasLightningNode(pub1)
if err != nil {
t.Fatalf("unable to query graph: %v", err)
}
if exists1 {
t.Fatalf("node already existed")
}
_, exists2, err := ctx.graph.HasLightningNode(pub2)
if err != nil {
t.Fatalf("unable to query graph: %v", err)
}
if exists2 {
t.Fatalf("node already existed")
}
// Add the edge between the two unknown nodes to the graph, and check
// that the nodes are found after the fact.
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
10000, 500)
if err != nil {
2017-05-16 04:16:28 +03:00
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("expected to be able to add edge to the channel graph,"+
" even though the vertexes were unknown: %v.", err)
}
// We must add the edge policy to be able to use the edge for route
// finding.
edgePolicy := &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
2018-08-16 21:47:29 +03:00
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 0
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
// Create edge in the other direction as well.
edgePolicy = &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
2018-08-16 21:47:29 +03:00
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 1
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
// After adding the edge between the two previously unknown nodes, they
// should have been added to the graph.
_, exists1, err = ctx.graph.HasLightningNode(pub1)
if err != nil {
t.Fatalf("unable to query graph: %v", err)
}
if !exists1 {
t.Fatalf("node1 was not added to the graph")
}
_, exists2, err = ctx.graph.HasLightningNode(pub2)
if err != nil {
t.Fatalf("unable to query graph: %v", err)
}
if !exists2 {
t.Fatalf("node2 was not added to the graph")
}
// We will connect node1 to the rest of the test graph, and make sure
// we can find a route to node2, which will use the just added channel
// edge.
// We will connect node 1 to "sophon"
connectNode := ctx.aliases["sophon"]
if connectNode == nil {
t.Fatalf("could not find node to connect to")
}
var (
pubKey1 *btcec.PublicKey
pubKey2 *btcec.PublicKey
)
node1Bytes := priv1.PubKey().SerializeCompressed()
node2Bytes := connectNode.SerializeCompressed()
if bytes.Compare(node1Bytes, node2Bytes) == -1 {
pubKey1 = priv1.PubKey()
pubKey2 = connectNode
} else {
pubKey1 = connectNode
pubKey2 = priv1.PubKey()
}
fundingTx, _, chanID, err = createChannelEdge(ctx,
pubKey1.SerializeCompressed(), pubKey2.SerializeCompressed(),
10000, 510)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock = &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge = &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
AuthProof: nil,
}
copy(edge.NodeKey1Bytes[:], node1Bytes)
copy(edge.NodeKey2Bytes[:], node2Bytes)
copy(edge.BitcoinKey1Bytes[:], node1Bytes)
copy(edge.BitcoinKey2Bytes[:], node2Bytes)
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge to the channel graph: %v.", err)
}
edgePolicy = &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
2018-08-16 21:47:29 +03:00
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 0
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
edgePolicy = &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
2018-08-16 21:47:29 +03:00
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 1
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
// We should now be able to find two routes to node 2.
paymentAmt := lnwire.NewMSatFromSatoshis(100)
targetNode := priv2.PubKey()
routes, err := ctx.router.FindRoutes(
targetNode, paymentAmt, noFeeLimit, defaultNumRoutes,
DefaultFinalCLTVDelta,
)
if err != nil {
t.Fatalf("unable to find any routes: %v", err)
}
if len(routes) != 2 {
t.Fatalf("expected to find 2 route, found: %v", len(routes))
}
// Now check that we can update the node info for the partial node
// without messing up the channel graph.
n1 := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: time.Unix(123, 0),
Addresses: testAddrs,
Color: color.RGBA{1, 2, 3, 0},
Alias: "node11",
AuthSigBytes: testSig.Serialize(),
Features: testFeatures,
}
copy(n1.PubKeyBytes[:], priv1.PubKey().SerializeCompressed())
if err := ctx.router.AddNode(n1); err != nil {
t.Fatalf("could not add node: %v", err)
}
n2 := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: time.Unix(123, 0),
Addresses: testAddrs,
Color: color.RGBA{1, 2, 3, 0},
Alias: "node22",
AuthSigBytes: testSig.Serialize(),
Features: testFeatures,
}
copy(n2.PubKeyBytes[:], priv2.PubKey().SerializeCompressed())
if err := ctx.router.AddNode(n2); err != nil {
t.Fatalf("could not add node: %v", err)
}
// Should still be able to find the routes, and the info should be
// updated.
routes, err = ctx.router.FindRoutes(
targetNode, paymentAmt, noFeeLimit, defaultNumRoutes,
DefaultFinalCLTVDelta,
)
if err != nil {
t.Fatalf("unable to find any routes: %v", err)
}
if len(routes) != 2 {
t.Fatalf("expected to find 2 route, found: %v", len(routes))
}
copy1, err := ctx.graph.FetchLightningNode(priv1.PubKey())
if err != nil {
t.Fatalf("unable to fetch node: %v", err)
}
if copy1.Alias != n1.Alias {
t.Fatalf("fetched node not equal to original")
}
copy2, err := ctx.graph.FetchLightningNode(priv2.PubKey())
if err != nil {
t.Fatalf("unable to fetch node: %v", err)
}
if copy2.Alias != n2.Alias {
t.Fatalf("fetched node not equal to original")
}
}
// TestWakeUpOnStaleBranch tests that upon startup of the ChannelRouter, if the
// the chain previously reflected in the channel graph is stale (overtaken by a
// longer chain), the channel router will prune the graph for any channels
// confirmed on the stale chain, and resync to the main chain.
func TestWakeUpOnStaleBranch(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
const chanValue = 10000
// chanID1 will not be reorged out.
var chanID1 uint64
// chanID2 will be reorged out.
var chanID2 uint64
// Create 10 common blocks, confirming chanID1.
for i := uint32(1); i <= 10; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := startingBlockHeight + i
if i == 5 {
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, height)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block.Transactions = append(block.Transactions,
fundingTx)
chanID1 = chanID.ToUint64()
}
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
[]*wire.MsgTx{})
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
_, forkHeight, err := ctx.chain.GetBestBlock()
if err != nil {
t.Fatalf("unable to ge best block: %v", err)
}
// Create 10 blocks on the minority chain, confirming chanID2.
for i := uint32(1); i <= 10; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := uint32(forkHeight) + i
if i == 5 {
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, height)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block.Transactions = append(block.Transactions,
fundingTx)
chanID2 = chanID.ToUint64()
}
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
[]*wire.MsgTx{})
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
// Now add the two edges to the channel graph, and check that they
// correctly show up in the database.
node1, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
node2, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
edge1 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID1,
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge1.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge1.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge1); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
edge2 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID2,
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge2.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge2.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge2); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Check that the fundingTxs are in the graph db.
_, _, has, err := ctx.graph.HasChannelEdge(chanID1)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !has {
t.Fatalf("could not find edge in graph")
}
_, _, has, err = ctx.graph.HasChannelEdge(chanID2)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID2)
}
if !has {
t.Fatalf("could not find edge in graph")
}
// Stop the router, so we can reorg the chain while its offline.
if err := ctx.router.Stop(); err != nil {
t.Fatalf("unable to stop router: %v", err)
}
// Create a 15 block fork.
for i := uint32(1); i <= 15; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := uint32(forkHeight) + i
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
}
// Give time to process new blocks.
time.Sleep(time.Millisecond * 500)
// Create new router with same graph database.
router, err := New(Config{
Graph: ctx.graph,
Chain: ctx.chain,
ChainView: ctx.chainView,
SendToSwitch: func(_ lnwire.ShortChannelID,
_ *lnwire.UpdateAddHTLC, _ *sphinx.Circuit) ([32]byte, error) {
return [32]byte{}, nil
},
ChannelPruneExpiry: time.Hour * 24,
GraphPruneInterval: time.Hour * 2,
})
if err != nil {
t.Fatalf("unable to create router %v", err)
}
// It should resync to the longer chain on startup.
if err := router.Start(); err != nil {
t.Fatalf("unable to start router: %v", err)
}
// The channel with chanID2 should not be in the database anymore,
// since it is not confirmed on the longest chain. chanID1 should
// still be.
_, _, has, err = ctx.graph.HasChannelEdge(chanID1)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !has {
t.Fatalf("did not find edge in graph")
}
_, _, has, err = ctx.graph.HasChannelEdge(chanID2)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID2)
}
if has {
t.Fatalf("found edge in graph")
}
}
// TestDisconnectedBlocks checks that the router handles a reorg happening when
// it is active.
func TestDisconnectedBlocks(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
const chanValue = 10000
// chanID1 will not be reorged out, while chanID2 will be reorged out.
var chanID1, chanID2 uint64
// Create 10 common blocks, confirming chanID1.
for i := uint32(1); i <= 10; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := startingBlockHeight + i
if i == 5 {
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, height)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block.Transactions = append(block.Transactions,
fundingTx)
chanID1 = chanID.ToUint64()
}
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
[]*wire.MsgTx{})
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
_, forkHeight, err := ctx.chain.GetBestBlock()
if err != nil {
t.Fatalf("unable to get best block: %v", err)
}
// Create 10 blocks on the minority chain, confirming chanID2.
var minorityChain []*wire.MsgBlock
for i := uint32(1); i <= 10; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := uint32(forkHeight) + i
if i == 5 {
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, height)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block.Transactions = append(block.Transactions,
fundingTx)
chanID2 = chanID.ToUint64()
}
minorityChain = append(minorityChain, block)
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
[]*wire.MsgTx{})
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
// Now add the two edges to the channel graph, and check that they
// correctly show up in the database.
node1, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
node2, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
edge1 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID1,
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
BitcoinKey1Bytes: node1.PubKeyBytes,
BitcoinKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge1.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge1.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge1); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
edge2 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID2,
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
BitcoinKey1Bytes: node1.PubKeyBytes,
BitcoinKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge2.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge2.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge2); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Check that the fundingTxs are in the graph db.
_, _, has, err := ctx.graph.HasChannelEdge(chanID1)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !has {
t.Fatalf("could not find edge in graph")
}
_, _, has, err = ctx.graph.HasChannelEdge(chanID2)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID2)
}
if !has {
t.Fatalf("could not find edge in graph")
}
// Create a 15 block fork. We first let the chainView notify the router
// about stale blocks, before sending the now connected blocks. We do
// this because we expect this order from the chainview.
for i := len(minorityChain) - 1; i >= 0; i-- {
block := minorityChain[i]
height := uint32(forkHeight) + uint32(i) + 1
ctx.chainView.notifyStaleBlock(block.BlockHash(), height,
block.Transactions)
}
for i := uint32(1); i <= 15; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := uint32(forkHeight) + i
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
block.Transactions)
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
// chanID2 should not be in the database anymore, since it is not
// confirmed on the longest chain. chanID1 should still be.
_, _, has, err = ctx.graph.HasChannelEdge(chanID1)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !has {
t.Fatalf("did not find edge in graph")
}
_, _, has, err = ctx.graph.HasChannelEdge(chanID2)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID2)
}
if has {
t.Fatalf("found edge in graph")
}
}
// TestChansClosedOfflinePruneGraph tests that if channels we know of are
// closed while we're offline, then once we resume operation of the
// ChannelRouter, then the channels are properly pruned.
func TestRouterChansClosedOfflinePruneGraph(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
const chanValue = 10000
// First, we'll create a channel, to be mined shortly at height 102.
block102 := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
nextHeight := startingBlockHeight + 1
fundingTx1, chanUTXO, chanID1, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, uint32(nextHeight))
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block102.Transactions = append(block102.Transactions, fundingTx1)
ctx.chain.addBlock(block102, uint32(nextHeight), rand.Uint32())
ctx.chain.setBestBlock(int32(nextHeight))
ctx.chainView.notifyBlock(block102.BlockHash(), uint32(nextHeight),
[]*wire.MsgTx{})
// We'll now create the edges and nodes within the database required
// for the ChannelRouter to properly recognize the channel we added
// above.
node1, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
node2, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
edge1 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID1.ToUint64(),
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge1.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge1.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge1); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// The router should now be aware of the channel we created above.
_, _, hasChan, err := ctx.graph.HasChannelEdge(chanID1.ToUint64())
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !hasChan {
t.Fatalf("could not find edge in graph")
}
// With the transaction included, and the router's database state
// updated, we'll now mine 5 additional blocks on top of it.
for i := 0; i < 5; i++ {
nextHeight++
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
ctx.chain.addBlock(block, uint32(nextHeight), rand.Uint32())
ctx.chain.setBestBlock(int32(nextHeight))
ctx.chainView.notifyBlock(block.BlockHash(), uint32(nextHeight),
[]*wire.MsgTx{})
}
// At this point, our starting height should be 107.
_, chainHeight, err := ctx.chain.GetBestBlock()
if err != nil {
t.Fatalf("unable to get best block: %v", err)
}
if chainHeight != 107 {
t.Fatalf("incorrect chain height: expected %v, got %v",
2017-11-07 03:49:27 +03:00
107, chainHeight)
}
// Next, we'll "shut down" the router in order to simulate downtime.
if err := ctx.router.Stop(); err != nil {
t.Fatalf("unable to shutdown router: %v", err)
}
// While the router is "offline" we'll mine 5 additional blocks, with
// the second block closing the channel we created above.
for i := 0; i < 5; i++ {
nextHeight++
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
if i == 2 {
// For the second block, we'll add a transaction that
// closes the channel we created above by spending the
// output.
closingTx := wire.NewMsgTx(2)
closingTx.AddTxIn(&wire.TxIn{
PreviousOutPoint: *chanUTXO,
})
block.Transactions = append(block.Transactions,
closingTx)
}
ctx.chain.addBlock(block, uint32(nextHeight), rand.Uint32())
ctx.chain.setBestBlock(int32(nextHeight))
ctx.chainView.notifyBlock(block.BlockHash(), uint32(nextHeight),
[]*wire.MsgTx{})
}
// At this point, our starting height should be 112.
_, chainHeight, err = ctx.chain.GetBestBlock()
if err != nil {
t.Fatalf("unable to get best block: %v", err)
}
if chainHeight != 112 {
t.Fatalf("incorrect chain height: expected %v, got %v",
2017-11-07 03:49:27 +03:00
112, chainHeight)
}
// Now we'll re-start the ChannelRouter. It should recognize that it's
// behind the main chain and prune all the blocks that it missed while
// it was down.
ctx.RestartRouter()
// At this point, the channel that was pruned should no longer be known
// by the router.
_, _, hasChan, err = ctx.graph.HasChannelEdge(chanID1.ToUint64())
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if hasChan {
t.Fatalf("channel was found in graph but shouldn't have been")
}
}
// TestFindPathFeeWeighting tests that the findPath method will properly prefer
// routes with lower fees over routes with lower time lock values. This is
// meant to exercise the fact that the internal findPath method ranks edges
// with the square of the total fee in order bias towards lower fees.
func TestFindPathFeeWeighting(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
sourceNode, err := ctx.graph.SourceNode()
if err != nil {
t.Fatalf("unable to fetch source node: %v", err)
}
ignoreVertex := make(map[Vertex]struct{})
ignoreEdge := make(map[edgeLocator]struct{})
amt := lnwire.MilliSatoshi(100)
target := ctx.aliases["luoji"]
if target == nil {
t.Fatalf("unable to find target node")
}
// We'll now attempt a path finding attempt using this set up. Due to
// the edge weighting, we should select the direct path over the 2 hop
// path even though the direct path has a higher potential time lock.
path, err := findPath(
&graphParams{
graph: ctx.graph,
},
&restrictParams{
ignoredNodes: ignoreVertex,
ignoredEdges: ignoreEdge,
feeLimit: noFeeLimit,
},
sourceNode, target, amt,
)
if err != nil {
t.Fatalf("unable to find path: %v", err)
}
// The route that was chosen should be exactly one hop, and should be
// directly to luoji.
if len(path) != 1 {
t.Fatalf("expected path length of 1, instead was: %v", len(path))
}
if path[0].Node.Alias != "luoji" {
t.Fatalf("wrong node: %v", path[0].Node.Alias)
}
}
// TestIsStaleNode tests that the IsStaleNode method properly detects stale
// node announcements.
func TestIsStaleNode(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Before we can insert a node in to the database, we need to create a
// channel that it's linked to.
var (
pub1 [33]byte
pub2 [33]byte
)
copy(pub1[:], priv1.PubKey().SerializeCompressed())
copy(pub2[:], priv2.PubKey().SerializeCompressed())
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
10000, 500)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Before we add the node, if we query for staleness, we should get
// false, as we haven't added the full node.
updateTimeStamp := time.Unix(123, 0)
if ctx.router.IsStaleNode(pub1, updateTimeStamp) {
t.Fatalf("incorrectly detected node as stale")
}
// With the node stub in the database, we'll add the fully node
// announcement to the database.
n1 := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: updateTimeStamp,
Addresses: testAddrs,
Color: color.RGBA{1, 2, 3, 0},
Alias: "node11",
AuthSigBytes: testSig.Serialize(),
Features: testFeatures,
}
copy(n1.PubKeyBytes[:], priv1.PubKey().SerializeCompressed())
if err := ctx.router.AddNode(n1); err != nil {
t.Fatalf("could not add node: %v", err)
}
// If we use the same timestamp and query for staleness, we should get
// true.
if !ctx.router.IsStaleNode(pub1, updateTimeStamp) {
t.Fatalf("failure to detect stale node update")
}
// If we update the timestamp and once again query for staleness, it
// should report false.
newTimeStamp := time.Unix(1234, 0)
if ctx.router.IsStaleNode(pub1, newTimeStamp) {
t.Fatalf("incorrectly detected node as stale")
}
}
// TestIsKnownEdge tests that the IsKnownEdge method properly detects stale
// channel announcements.
func TestIsKnownEdge(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// First, we'll create a new channel edge (just the info) and insert it
// into the database.
var (
pub1 [33]byte
pub2 [33]byte
)
copy(pub1[:], priv1.PubKey().SerializeCompressed())
copy(pub2[:], priv2.PubKey().SerializeCompressed())
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
10000, 500)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Now that the edge has been inserted, query is the router already
// knows of the edge should return true.
if !ctx.router.IsKnownEdge(*chanID) {
t.Fatalf("router should detect edge as known")
}
}
// TestIsStaleEdgePolicy tests that the IsStaleEdgePolicy properly detects
// stale channel edge update announcements.
func TestIsStaleEdgePolicy(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight,
basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// First, we'll create a new channel edge (just the info) and insert it
// into the database.
var (
pub1 [33]byte
pub2 [33]byte
)
copy(pub1[:], priv1.PubKey().SerializeCompressed())
copy(pub2[:], priv2.PubKey().SerializeCompressed())
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
10000, 500)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
// If we query for staleness before adding the edge, we should get
// false.
updateTimeStamp := time.Unix(123, 0)
if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 0) {
t.Fatalf("router failed to detect fresh edge policy")
}
if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 1) {
t.Fatalf("router failed to detect fresh edge policy")
}
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// We'll also add two edge policies, one for each direction.
edgePolicy := &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: updateTimeStamp,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 0
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
edgePolicy = &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: updateTimeStamp,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 1
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
// Now that the edges have been added, an identical (chanID, flag,
// timestamp) tuple for each edge should be detected as a stale edge.
if !ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 0) {
t.Fatalf("router failed to detect stale edge policy")
}
if !ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 1) {
t.Fatalf("router failed to detect stale edge policy")
}
// If we now update the timestamp for both edges, the router should
// detect that this tuple represents a fresh edge.
updateTimeStamp = time.Unix(9999, 0)
if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 0) {
t.Fatalf("router failed to detect fresh edge policy")
}
if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 1) {
t.Fatalf("router failed to detect fresh edge policy")
}
}
// TestEmptyRoutesGenerateSphinxPacket tests that the generateSphinxPacket
// function is able to gracefully handle being passed a nil set of hops for the
// route by the caller.
func TestEmptyRoutesGenerateSphinxPacket(t *testing.T) {
t.Parallel()
emptyRoute := &Route{}
_, _, err := generateSphinxPacket(emptyRoute, testHash[:])
if err != ErrNoRouteHopsProvided {
t.Fatalf("expected empty hops error: instead got: %v", err)
}
}