lnd.xprv/routing/pathfind.go

package routing

import (
	"container/heap"
	"math"

	"github.com/coreos/bbolt"

	"github.com/lightningnetwork/lnd/channeldb"
	"github.com/lightningnetwork/lnd/lnwire"
	"github.com/lightningnetwork/lnd/routing/route"
)

const (
	// HopLimit is the maximum number hops that is permissible as a route.
	// Any potential paths found that lie above this limit will be rejected
	// with an error. This value is computed using the current fixed-size
	// packet length of the Sphinx construction.
	HopLimit = 20

	// infinity is used as a starting distance in our shortest path search.
	infinity = math.MaxInt64

	// RiskFactorBillionths controls the influence of time lock delta
	// of a channel on route selection. It is expressed as billionths
	// of msat per msat sent through the channel per time lock delta
	// block. See edgeWeight function below for more details.
	// The chosen value is based on the previous incorrect weight function
	// 1 + timelock + fee * fee. In this function, the fee penalty
	// diminishes the time lock penalty for all but the smallest amounts.
	// To not change the behaviour of path finding too drastically, a
	// relatively small value is chosen which is still big enough to give
	// some effect with smaller time lock values. The value may need
	// tweaking and/or be made configurable in the future.
	RiskFactorBillionths = 15
)

// pathFinder defines the interface of a path finding algorithm.
type pathFinder = func(g *graphParams, r *RestrictParams,
	source, target route.Vertex, amt lnwire.MilliSatoshi) (
	[]*channeldb.ChannelEdgePolicy, error)

var (
	// DefaultPaymentAttemptPenalty is the virtual cost in path finding weight
	// units of executing a payment attempt that fails. It is used to trade
	// off potentially better routes against their probability of
	// succeeding.
	DefaultPaymentAttemptPenalty = lnwire.NewMSatFromSatoshis(100)

	// DefaultMinRouteProbability is the default minimum probability for routes
	// returned from findPath.
	DefaultMinRouteProbability = float64(0.01)

	// DefaultAprioriHopProbability is the default a priori probability for
	// a hop.
	DefaultAprioriHopProbability = float64(0.95)
)

// edgePolicyWithSource is a helper struct to keep track of the source node
// of a channel edge. ChannelEdgePolicy only contains to destination node
// of the edge.
type edgePolicyWithSource struct {
	sourceNode route.Vertex
	edge       *channeldb.ChannelEdgePolicy
}

// computeFee computes the fee to forward an HTLC of `amt` milli-satoshis over
// the passed active payment channel. This value is currently computed as
// specified in BOLT07, but will likely change in the near future.
func computeFee(amt lnwire.MilliSatoshi,
	edge *channeldb.ChannelEdgePolicy) lnwire.MilliSatoshi {

	return edge.FeeBaseMSat + (amt*edge.FeeProportionalMillionths)/1000000
}

// isSamePath returns true if path1 and path2 travel through the exact same
// edges, and false otherwise.
func isSamePath(path1, path2 []*channeldb.ChannelEdgePolicy) bool {
	if len(path1) != len(path2) {
		return false
	}

	for i := 0; i < len(path1); i++ {
		if path1[i].ChannelID != path2[i].ChannelID {
			return false
		}
	}

	return true
}

// newRoute returns a fully valid route between the source and target that's
// capable of supporting a payment of `amtToSend` after fees are fully
// computed. If the route is too long, or the selected path cannot support the
// fully payment including fees, then a non-nil error is returned.
//
// NOTE: The passed slice of ChannelHops MUST be sorted in forward order: from
// the source to the target node of the path finding attempt.
func newRoute(amtToSend lnwire.MilliSatoshi, sourceVertex route.Vertex,
	pathEdges []*channeldb.ChannelEdgePolicy, currentHeight uint32,
	finalCLTVDelta uint16) (*route.Route, error) {

	var (
		hops []*route.Hop

		// totalTimeLock will accumulate the cumulative time lock
		// across the entire route. This value represents how long the
		// sender will need to wait in the *worst* case.
		totalTimeLock = currentHeight

		// nextIncomingAmount is the amount that will need to flow into
		// the *next* hop. Since we're going to be walking the route
		// backwards below, this next hop gets closer and closer to the
		// sender of the payment.
		nextIncomingAmount lnwire.MilliSatoshi
	)

	pathLength := len(pathEdges)
	for i := pathLength - 1; i >= 0; i-- {
		// Now we'll start to calculate the items within the per-hop
		// payload for the hop this edge is leading to.
		edge := pathEdges[i]

		// If this is the last hop, then the hop payload will contain
		// the exact amount. In BOLT #4: Onion Routing
		// Protocol / "Payload for the Last Node", this is detailed.
		amtToForward := amtToSend

		// Fee is not part of the hop payload, but only used for
		// reporting through RPC. Set to zero for the final hop.
		fee := lnwire.MilliSatoshi(0)

		// If the current hop isn't the last hop, then add enough funds
		// to pay for transit over the next link.
		if i != len(pathEdges)-1 {
			// The amount that the current hop needs to forward is
			// equal to the incoming amount of the next hop.
			amtToForward = nextIncomingAmount

			// The fee that needs to be paid to the current hop is
			// based on the amount that this hop needs to forward
			// and its policy for the outgoing channel. This policy
			// is stored as part of the incoming channel of
			// the next hop.
			fee = computeFee(amtToForward, pathEdges[i+1])
		}

		// If this is the last hop, then for verification purposes, the
		// value of the outgoing time-lock should be _exactly_ the
		// absolute time out they'd expect in the HTLC.
		var outgoingTimeLock uint32
		if i == len(pathEdges)-1 {
			// As this is the last hop, we'll use the specified
			// final CLTV delta value instead of the value from the
			// last link in the route.
			totalTimeLock += uint32(finalCLTVDelta)

			outgoingTimeLock = currentHeight + uint32(finalCLTVDelta)
		} else {
			// Next, increment the total timelock of the entire
			// route such that each hops time lock increases as we
			// walk backwards in the route, using the delta of the
			// previous hop.
			delta := uint32(pathEdges[i+1].TimeLockDelta)
			totalTimeLock += delta

			// Otherwise, the value of the outgoing time-lock will
			// be the value of the time-lock for the _outgoing_
			// HTLC, so we factor in their specified grace period
			// (time lock delta).
			outgoingTimeLock = totalTimeLock - delta
		}

		// Since we're traversing the path backwards atm, we prepend
		// each new hop such that, the final slice of hops will be in
		// the forwards order.
		currentHop := &route.Hop{
			PubKeyBytes:      edge.Node.PubKeyBytes,
			ChannelID:        edge.ChannelID,
			AmtToForward:     amtToForward,
			OutgoingTimeLock: outgoingTimeLock,
		}
		hops = append([]*route.Hop{currentHop}, hops...)

		// Finally, we update the amount that needs to flow into the
		// *next* hop, which is the amount this hop needs to forward,
		// accounting for the fee that it takes.
		nextIncomingAmount = amtToForward + fee
	}

	// With the base routing data expressed as hops, build the full route
	newRoute, err := route.NewRouteFromHops(
		nextIncomingAmount, totalTimeLock, route.Vertex(sourceVertex), hops,
	)
	if err != nil {
		return nil, err
	}

	return newRoute, nil
}

// edgeWeight computes the weight of an edge. This value is used when searching
// for the shortest path within the channel graph between two nodes. Weight is
// is the fee itself plus a time lock penalty added to it. This benefits
// channels with shorter time lock deltas and shorter (hops) routes in general.
// RiskFactor controls the influence of time lock on route selection. This is
// currently a fixed value, but might be configurable in the future.
func edgeWeight(lockedAmt lnwire.MilliSatoshi, fee lnwire.MilliSatoshi,
	timeLockDelta uint16) int64 {
	// timeLockPenalty is the penalty for the time lock delta of this channel.
	// It is controlled by RiskFactorBillionths and scales proportional
	// to the amount that will pass through channel. Rationale is that it if
	// a twice as large amount gets locked up, it is twice as bad.
	timeLockPenalty := int64(lockedAmt) * int64(timeLockDelta) *
		RiskFactorBillionths / 1000000000

	return int64(fee) + timeLockPenalty
}

// graphParams wraps the set of graph parameters passed to findPath.
type graphParams struct {
	// tx can be set to an existing db transaction. If not set, a new
	// transaction will be started.
	tx *bbolt.Tx

	// graph is the ChannelGraph to be used during path finding.
	graph *channeldb.ChannelGraph

	// additionalEdges is an optional set of edges that should be
	// considered during path finding, that is not already found in the
	// channel graph.
	additionalEdges map[route.Vertex][]*channeldb.ChannelEdgePolicy

	// bandwidthHints is an optional map from channels to bandwidths that
	// can be populated if the caller has a better estimate of the current
	// channel bandwidth than what is found in the graph. If set, it will
	// override the capacities and disabled flags found in the graph for
	// local channels when doing path finding. In particular, it should be
	// set to the current available sending bandwidth for active local
	// channels, and 0 for inactive channels.
	bandwidthHints map[uint64]lnwire.MilliSatoshi
}

// RestrictParams wraps the set of restrictions passed to findPath that the
// found path must adhere to.
type RestrictParams struct {
	// ProbabilitySource is a callback that is expected to return the
	// success probability of traversing the channel from the node.
	ProbabilitySource func(route.Vertex, EdgeLocator,
		lnwire.MilliSatoshi) float64

	// FeeLimit is a maximum fee amount allowed to be used on the path from
	// the source to the target.
	FeeLimit lnwire.MilliSatoshi

	// OutgoingChannelID is the channel that needs to be taken to the first
	// hop. If nil, any channel may be used.
	OutgoingChannelID *uint64

	// CltvLimit is the maximum time lock of the route excluding the final
	// ctlv. After path finding is complete, the caller needs to increase
	// all cltv expiry heights with the required final cltv delta.
	CltvLimit *uint32

	// PaymentAttemptPenalty is the virtual cost in path finding weight
	// units of executing a payment attempt that fails. It is used to trade
	// off potentially better routes against their probability of
	// succeeding.
	PaymentAttemptPenalty lnwire.MilliSatoshi

	// MinProbability defines the minimum success probability of the
	// returned route.
	MinProbability float64
}

// findPath attempts to find a path from the source node within the
// ChannelGraph to the target node that's capable of supporting a payment of
// `amt` value. The current approach implemented is modified version of
// Dijkstra's algorithm to find a single shortest path between the source node
// and the destination. The distance metric used for edges is related to the
// time-lock+fee costs along a particular edge. If a path is found, this
// function returns a slice of ChannelHop structs which encoded the chosen path
// from the target to the source. The search is performed backwards from
// destination node back to source. This is to properly accumulate fees
// that need to be paid along the path and accurately check the amount
// to forward at every node against the available bandwidth.
func findPath(g *graphParams, r *RestrictParams, source, target route.Vertex,
	amt lnwire.MilliSatoshi) ([]*channeldb.ChannelEdgePolicy, error) {

	var err error
	tx := g.tx
	if tx == nil {
		tx, err = g.graph.Database().Begin(false)
		if err != nil {
			return nil, err
		}
		defer tx.Rollback()
	}

	// First we'll initialize an empty heap which'll help us to quickly
	// locate the next edge we should visit next during our graph
	// traversal.
	nodeHeap := newDistanceHeap()

	// For each node in the graph, we create an entry in the distance map
	// for the node set with a distance of "infinity". graph.ForEachNode
	// also returns the source node, so there is no need to add the source
	// node explicitly.
	distance := make(map[route.Vertex]nodeWithDist)
	if err := g.graph.ForEachNode(tx, func(_ *bbolt.Tx,
		node *channeldb.LightningNode) error {
		// TODO(roasbeef): with larger graph can just use disk seeks
		// with a visited map
		distance[route.Vertex(node.PubKeyBytes)] = nodeWithDist{
			dist: infinity,
			node: route.Vertex(node.PubKeyBytes),
		}
		return nil
	}); err != nil {
		return nil, err
	}

	additionalEdgesWithSrc := make(map[route.Vertex][]*edgePolicyWithSource)
	for vertex, outgoingEdgePolicies := range g.additionalEdges {
		// We'll also include all the nodes found within the additional
		// edges that are not known to us yet in the distance map.
		distance[vertex] = nodeWithDist{
			dist: infinity,
			node: vertex,
		}

		// Build reverse lookup to find incoming edges. Needed because
		// search is taken place from target to source.
		for _, outgoingEdgePolicy := range outgoingEdgePolicies {
			toVertex := outgoingEdgePolicy.Node.PubKeyBytes
			incomingEdgePolicy := &edgePolicyWithSource{
				sourceNode: vertex,
				edge:       outgoingEdgePolicy,
			}

			additionalEdgesWithSrc[toVertex] =
				append(additionalEdgesWithSrc[toVertex],
					incomingEdgePolicy)
		}
	}

	// We can't always assume that the end destination is publicly
	// advertised to the network and included in the graph.ForEachNode call
	// above, so we'll manually include the target node. The target node
	// charges no fee. Distance is set to 0, because this is the starting
	// point of the graph traversal. We are searching backwards to get the
	// fees first time right and correctly match channel bandwidth.
	distance[target] = nodeWithDist{
		dist:            0,
		weight:          0,
		node:            target,
		amountToReceive: amt,
		incomingCltv:    0,
		probability:     1,
	}

	// We'll use this map as a series of "next" hop pointers. So to get
	// from `Vertex` to the target node, we'll take the edge that it's
	// mapped to within `next`.
	next := make(map[route.Vertex]*channeldb.ChannelEdgePolicy)

	// processEdge is a helper closure that will be used to make sure edges
	// satisfy our specific requirements.
	processEdge := func(fromVertex route.Vertex, bandwidth lnwire.MilliSatoshi,
		edge *channeldb.ChannelEdgePolicy, toNode route.Vertex) {

		// If this is not a local channel and it is disabled, we will
		// skip it.
		// TODO(halseth): also ignore disable flags for non-local
		// channels if bandwidth hint is set?
		isSourceChan := fromVertex == source

		edgeFlags := edge.ChannelFlags
		isDisabled := edgeFlags&lnwire.ChanUpdateDisabled != 0

		if !isSourceChan && isDisabled {
			return
		}

		// If we have an outgoing channel restriction and this is not
		// the specified channel, skip it.
		if isSourceChan && r.OutgoingChannelID != nil &&
			*r.OutgoingChannelID != edge.ChannelID {

			return
		}

		// Calculate amount that the candidate node would have to sent
		// out.
		toNodeDist := distance[toNode]
		amountToSend := toNodeDist.amountToReceive

		// Request the success probability for this edge.
		locator := newEdgeLocator(edge)
		edgeProbability := r.ProbabilitySource(
			fromVertex, *locator, amountToSend,
		)

		log.Tracef("path finding probability: fromnode=%v, chanid=%v, "+
			"probability=%v", fromVertex, locator.ChannelID,
			edgeProbability)

		// If the probability is zero, there is no point in trying.
		if edgeProbability == 0 {
			return
		}

		// If the estimated bandwidth of the channel edge is not able
		// to carry the amount that needs to be send, return.
		if bandwidth < amountToSend {
			return
		}

		// If the amountToSend is less than the minimum required
		// amount, return.
		if amountToSend < edge.MinHTLC {
			return
		}

		// If this edge was constructed from a hop hint, we won't have access to
		// its max HTLC. Therefore, only consider discarding this edge here if
		// the field is set.
		if edge.MaxHTLC != 0 && edge.MaxHTLC < amountToSend {
			return
		}

		// Compute fee that fromVertex is charging. It is based on the
		// amount that needs to be sent to the next node in the route.
		//
		// Source node has no predecessor to pay a fee. Therefore set
		// fee to zero, because it should not be included in the fee
		// limit check and edge weight.
		//
		// Also determine the time lock delta that will be added to the
		// route if fromVertex is selected. If fromVertex is the source
		// node, no additional timelock is required.
		var fee lnwire.MilliSatoshi
		var timeLockDelta uint16
		if fromVertex != source {
			fee = computeFee(amountToSend, edge)
			timeLockDelta = edge.TimeLockDelta
		}

		incomingCltv := toNodeDist.incomingCltv +
			uint32(timeLockDelta)

		// Check that we have cltv limit and that we are within it.
		if r.CltvLimit != nil && incomingCltv > *r.CltvLimit {
			return
		}

		// amountToReceive is the amount that the node that is added to
		// the distance map needs to receive from a (to be found)
		// previous node in the route. That previous node will need to
		// pay the amount that this node forwards plus the fee it
		// charges.
		amountToReceive := amountToSend + fee

		// Check if accumulated fees would exceed fee limit when this
		// node would be added to the path.
		totalFee := amountToReceive - amt
		if totalFee > r.FeeLimit {
			return
		}

		// Calculate total probability of successfully reaching target
		// by multiplying the probabilities. Both this edge and the rest
		// of the route must succeed.
		probability := toNodeDist.probability * edgeProbability

		// If the probability is below the specified lower bound, we can
		// abandon this direction. Adding further nodes can only lower
		// the probability more.
		if probability < r.MinProbability {
			return
		}

		// By adding fromVertex in the route, there will be an extra
		// weight composed of the fee that this node will charge and
		// the amount that will be locked for timeLockDelta blocks in
		// the HTLC that is handed out to fromVertex.
		weight := edgeWeight(amountToReceive, fee, timeLockDelta)

		// Compute the tentative weight to this new channel/edge
		// which is the weight from our toNode to the target node
		// plus the weight of this edge.
		tempWeight := toNodeDist.weight + weight

		// Add an extra factor to the weight to take into account the
		// probability.
		tempDist := getProbabilityBasedDist(
			tempWeight, probability, int64(r.PaymentAttemptPenalty),
		)

		// If the current best route is better than this candidate
		// route, return. It is important to also return if the distance
		// is equal, because otherwise the algorithm could run into an
		// endless loop.
		if tempDist >= distance[fromVertex].dist {
			return
		}

		// Every edge should have a positive time lock delta. If we
		// encounter a zero delta, log a warning line.
		if edge.TimeLockDelta == 0 {
			log.Warnf("Channel %v has zero cltv delta",
				edge.ChannelID)
		}

		// All conditions are met and this new tentative distance is
		// better than the current best known distance to this node.
		// The new better distance is recorded, and also our "next hop"
		// map is populated with this edge.
		distance[fromVertex] = nodeWithDist{
			dist:            tempDist,
			weight:          tempWeight,
			node:            fromVertex,
			amountToReceive: amountToReceive,
			incomingCltv:    incomingCltv,
			probability:     probability,
		}

		next[fromVertex] = edge

		// Either push distance[fromVertex] onto the heap if the node
		// represented by fromVertex is not already on the heap OR adjust
		// its position within the heap via heap.Fix.
		nodeHeap.PushOrFix(distance[fromVertex])
	}

	// TODO(roasbeef): also add path caching
	//  * similar to route caching, but doesn't factor in the amount

	// To start, our target node will the sole item within our distance
	// heap.
	heap.Push(&nodeHeap, distance[target])

	for nodeHeap.Len() != 0 {
		// Fetch the node within the smallest distance from our source
		// from the heap.
		partialPath := heap.Pop(&nodeHeap).(nodeWithDist)
		pivot := partialPath.node

		// If we've reached our source (or we don't have any incoming
		// edges), then we're done here and can exit the graph
		// traversal early.
		if pivot == source {
			break
		}

		cb := func(_ *bbolt.Tx, edgeInfo *channeldb.ChannelEdgeInfo, _,
			inEdge *channeldb.ChannelEdgePolicy) error {

			// If there is no edge policy for this candidate
			// node, skip. Note that we are searching backwards
			// so this node would have come prior to the pivot
			// node in the route.
			if inEdge == nil {
				return nil
			}

			// We'll query the lower layer to see if we can obtain
			// any more up to date information concerning the
			// bandwidth of this edge.
			edgeBandwidth, ok := g.bandwidthHints[edgeInfo.ChannelID]
			if !ok {
				// If we don't have a hint for this edge, then
				// we'll just use the known Capacity/MaxHTLC as
				// the available bandwidth. It's possible for
				// the capacity to be unknown when operating
				// under a light client.
				edgeBandwidth = inEdge.MaxHTLC
				if edgeBandwidth == 0 {
					edgeBandwidth = lnwire.NewMSatFromSatoshis(
						edgeInfo.Capacity,
					)
				}
			}

			// Before we can process the edge, we'll need to fetch
			// the node on the _other_ end of this channel as we
			// may later need to iterate over the incoming edges of
			// this node if we explore it further.
			chanSource, err := edgeInfo.OtherNodeKeyBytes(pivot[:])
			if err != nil {
				return err
			}

			// Check if this candidate node is better than what we
			// already have.
			processEdge(route.Vertex(chanSource), edgeBandwidth, inEdge, pivot)
			return nil
		}

		// Now that we've found the next potential step to take we'll
		// examine all the incoming edges (channels) from this node to
		// further our graph traversal.
		err := g.graph.ForEachNodeChannel(tx, pivot[:], cb)
		if err != nil {
			return nil, err
		}

		// Then, we'll examine all the additional edges from the node
		// we're currently visiting. Since we don't know the capacity
		// of the private channel, we'll assume it was selected as a
		// routing hint due to having enough capacity for the payment
		// and use the payment amount as its capacity.
		bandWidth := partialPath.amountToReceive
		for _, reverseEdge := range additionalEdgesWithSrc[pivot] {
			processEdge(reverseEdge.sourceNode, bandWidth,
				reverseEdge.edge, pivot)
		}
	}

	// If the source node isn't found in the next hop map, then a path
	// doesn't exist, so we terminate in an error.
	if _, ok := next[source]; !ok {
		return nil, newErrf(ErrNoPathFound, "unable to find a path to "+
			"destination")
	}

	// Use the nextHop map to unravel the forward path from source to
	// target.
	pathEdges := make([]*channeldb.ChannelEdgePolicy, 0, len(next))
	currentNode := source
	for currentNode != target { // TODO(roasbeef): assumes no cycles
		// Determine the next hop forward using the next map.
		nextNode := next[currentNode]

		// Add the next hop to the list of path edges.
		pathEdges = append(pathEdges, nextNode)

		// Advance current node.
		currentNode = route.Vertex(nextNode.Node.PubKeyBytes)
	}

	// The route is invalid if it spans more than 20 hops. The current
	// Sphinx (onion routing) implementation can only encode up to 20 hops
	// as the entire packet is fixed size. If this route is more than 20
	// hops, then it's invalid.
	numEdges := len(pathEdges)
	if numEdges > HopLimit {
		return nil, newErr(ErrMaxHopsExceeded, "potential path has "+
			"too many hops")
	}

	log.Debugf("Found route: probability=%v, hops=%v, fee=%v\n",
		distance[source].probability, numEdges,
		distance[source].amountToReceive-amt)

	return pathEdges, nil
}

// getProbabilityBasedDist converts a weight into a distance that takes into
// account the success probability and the (virtual) cost of a failed payment
// attempt.
//
// Derivation:
//
// Suppose there are two routes A and B with fees Fa and Fb and success
// probabilities Pa and Pb.
//
// Is the expected cost of trying route A first and then B lower than trying the
// other way around?
//
// The expected cost of A-then-B is: Pa*Fa + (1-Pa)*Pb*(c+Fb)
//
// The expected cost of B-then-A is: Pb*Fb + (1-Pb)*Pa*(c+Fa)
//
// In these equations, the term representing the case where both A and B fail is
// left out because its value would be the same in both cases.
//
// Pa*Fa + (1-Pa)*Pb*(c+Fb) < Pb*Fb + (1-Pb)*Pa*(c+Fa)
//
// Pa*Fa + Pb*c + Pb*Fb - Pa*Pb*c - Pa*Pb*Fb < Pb*Fb + Pa*c + Pa*Fa - Pa*Pb*c - Pa*Pb*Fa
//
// Removing terms that cancel out:
// Pb*c - Pa*Pb*Fb < Pa*c - Pa*Pb*Fa
//
// Divide by Pa*Pb:
// c/Pa - Fb < c/Pb - Fa
//
// Move terms around:
// Fa + c/Pa < Fb + c/Pb
//
// So the value of F + c/P can be used to compare routes.
func getProbabilityBasedDist(weight int64, probability float64, penalty int64) int64 {
	// Clamp probability to prevent overflow.
	const minProbability = 0.00001

	if probability < minProbability {
		return infinity
	}

	return weight + int64(float64(penalty)/probability)
}