lnd.xprv/routing/pathfind_test.go

633 lines
19 KiB
Go
Raw Normal View History

routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
package routing
import (
"bytes"
"encoding/binary"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
"encoding/hex"
"encoding/json"
"errors"
"io/ioutil"
"math/big"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
"net"
"os"
"strings"
"testing"
"time"
"github.com/lightningnetwork/lnd/channeldb"
"github.com/lightningnetwork/lnd/lnwire"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
"github.com/roasbeef/btcd/btcec"
"github.com/roasbeef/btcd/chaincfg/chainhash"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
"github.com/roasbeef/btcd/wire"
"github.com/roasbeef/btcutil"
prand "math/rand"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
)
const (
// basicGraphFilePath is the file path for a basic graph used within
// the tests. The basic graph consists of 5 nodes with 5 channels
// connecting them.
basicGraphFilePath = "testdata/basic_graph.json"
// excessiveHopsGraphFilePath is a file path which stores the JSON dump
// of a graph which was previously triggering an erroneous excessive
// hops error. The error has since been fixed, but a test case
// exercising it is kept around to guard against regressions.
excessiveHopsGraphFilePath = "testdata/excessive_hops.json"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
)
var (
randSource = prand.NewSource(time.Now().Unix())
randInts = prand.New(randSource)
testSig = &btcec.Signature{
R: new(big.Int),
S: new(big.Int),
}
_, _ = testSig.R.SetString("63724406601629180062774974542967536251589935445068131219452686511677818569431", 10)
_, _ = testSig.S.SetString("18801056069249825825291287104931333862866033135609736119018462340006816851118", 10)
testAuthProof = channeldb.ChannelAuthProof{
NodeSig1: testSig,
NodeSig2: testSig,
BitcoinSig1: testSig,
BitcoinSig2: testSig,
}
)
// testGraph is the struct which corresponds to the JSON format used to encode
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// graphs within the files in the testdata directory.
//
// TODO(roasbeef): add test graph auto-generator
type testGraph struct {
Info []string `json:"info"`
Nodes []testNode `json:"nodes"`
Edges []testChan `json:"edges"`
}
// testNode represents a node within the test graph above. We skip certain
// information such as the node's IP address as that information isn't needed
// for our tests.
type testNode struct {
Source bool `json:"source"`
PubKey string `json:"pubkey"`
Alias string `json:"alias"`
}
// testChan represents the JSON version of a payment channel. This struct
// matches the Json that's encoded under the "edges" key within the test graph.
type testChan struct {
Node1 string `json:"node_1"`
Node2 string `json:"node_2"`
ChannelID uint64 `json:"channel_id"`
ChannelPoint string `json:"channel_point"`
Flags uint16 `json:"flags"`
Expiry uint16 `json:"expiry"`
MinHTLC int64 `json:"min_htlc"`
FeeBaseMsat int64 `json:"fee_base_msat"`
FeeRate float64 `json:"fee_rate"`
Capacity int64 `json:"capacity"`
}
// makeTestGraph creates a new instance of a channeldb.ChannelGraph for testing
// purposes. A callback which cleans up the created temporary directories is
// also returned and intended to be executed after the test completes.
func makeTestGraph() (*channeldb.ChannelGraph, func(), error) {
// First, create a temporary directory to be used for the duration of
// this test.
tempDirName, err := ioutil.TempDir("", "channeldb")
if err != nil {
return nil, nil, err
}
// Next, create channeldb for the first time.
cdb, err := channeldb.Open(tempDirName)
if err != nil {
return nil, nil, err
}
cleanUp := func() {
cdb.Close()
os.RemoveAll(tempDirName)
}
return cdb.ChannelGraph(), cleanUp, nil
}
// aliasMap is a map from a node's alias to its public key. This type is
// provided in order to allow easily look up from the human rememberable alias
// to an exact node's public key.
type aliasMap map[string]*btcec.PublicKey
// parseTestGraph returns a fully populated ChannelGraph given a path to a JSON
// file which encodes a test graph.
func parseTestGraph(path string) (*channeldb.ChannelGraph, func(), aliasMap, error) {
2017-02-23 22:56:47 +03:00
graphJSON, err := ioutil.ReadFile(path)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
if err != nil {
return nil, nil, nil, err
}
// First unmarshal the JSON graph into an instance of the testGraph
// struct. Using the struct tags created above in the struct, the JSON
// will be properly parsed into the struct above.
var g testGraph
2017-02-23 22:56:47 +03:00
if err := json.Unmarshal(graphJSON, &g); err != nil {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
return nil, nil, nil, err
}
// We'll use this fake address for the IP address of all the nodes in
// our tests. This value isn't needed for path finding so it doesn't
// need to be unique.
var testAddrs []net.Addr
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
testAddr, err := net.ResolveTCPAddr("tcp", "192.0.0.1:8888")
if err != nil {
return nil, nil, nil, err
}
testAddrs = append(testAddrs, testAddr)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// Next, create a temporary graph database for usage within the test.
graph, cleanUp, err := makeTestGraph()
if err != nil {
return nil, nil, nil, err
}
aliasMap := make(map[string]*btcec.PublicKey)
var source *channeldb.LightningNode
// First we insert all the nodes within the graph as vertexes.
for _, node := range g.Nodes {
pubBytes, err := hex.DecodeString(node.PubKey)
if err != nil {
return nil, nil, nil, err
}
pub, err := btcec.ParsePubKey(pubBytes, btcec.S256())
if err != nil {
return nil, nil, nil, err
}
dbNode := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
AuthSig: testSig,
LastUpdate: time.Now(),
Addresses: testAddrs,
PubKey: pub,
Alias: node.Alias,
Features: testFeatures,
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// We require all aliases within the graph to be unique for our
// tests.
if _, ok := aliasMap[node.Alias]; ok {
return nil, nil, nil, errors.New("aliases for nodes " +
"must be unique!")
}
2017-02-23 22:56:47 +03:00
// If the alias is unique, then add the node to the
// alias map for easy lookup.
aliasMap[node.Alias] = pub
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// If the node is tagged as the source, then we create a
// pointer to is so we can mark the source in the graph
// properly.
if node.Source {
// If we come across a node that's marked as the
// source, and we've already set the source in a prior
// iteration, then the JSON has an error as only ONE
// node can be the source in the graph.
if source != nil {
return nil, nil, nil, errors.New("JSON is invalid " +
"multiple nodes are tagged as the source")
}
source = dbNode
}
// With the node fully parsed, add it as a vertex within the
// graph.
if err := graph.AddLightningNode(dbNode); err != nil {
return nil, nil, nil, err
}
}
// Set the selected source node
if err := graph.SetSourceNode(source); err != nil {
return nil, nil, nil, err
}
// With all the vertexes inserted, we can now insert the edges into the
// test graph.
for _, edge := range g.Edges {
node1Bytes, err := hex.DecodeString(edge.Node1)
if err != nil {
return nil, nil, nil, err
}
node1Pub, err := btcec.ParsePubKey(node1Bytes, btcec.S256())
if err != nil {
return nil, nil, nil, err
}
node2Bytes, err := hex.DecodeString(edge.Node2)
if err != nil {
return nil, nil, nil, err
}
node2Pub, err := btcec.ParsePubKey(node2Bytes, btcec.S256())
if err != nil {
return nil, nil, nil, err
}
fundingTXID := strings.Split(edge.ChannelPoint, ":")[0]
txidBytes, err := chainhash.NewHashFromStr(fundingTXID)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
if err != nil {
return nil, nil, nil, err
}
fundingPoint := wire.OutPoint{
Hash: *txidBytes,
Index: 0,
}
// We first insert the existence of the edge between the two
// nodes.
edgeInfo := channeldb.ChannelEdgeInfo{
ChannelID: edge.ChannelID,
NodeKey1: node1Pub,
NodeKey2: node2Pub,
BitcoinKey1: node1Pub,
BitcoinKey2: node2Pub,
AuthProof: &testAuthProof,
ChannelPoint: fundingPoint,
Capacity: btcutil.Amount(edge.Capacity),
}
if err := graph.AddChannelEdge(&edgeInfo); err != nil {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
return nil, nil, nil, err
}
edgePolicy := &channeldb.ChannelEdgePolicy{
Signature: testSig,
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
ChannelID: edge.ChannelID,
LastUpdate: time.Now(),
TimeLockDelta: edge.Expiry,
MinHTLC: lnwire.MilliSatoshi(edge.MinHTLC),
FeeBaseMSat: lnwire.MilliSatoshi(edge.FeeBaseMsat),
FeeProportionalMillionths: lnwire.MilliSatoshi(edge.FeeRate),
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// As the graph itself is directed, we need to insert two edges
// into the graph: one from node1->node2 and one from
// node2->node1. A flag of 0 indicates this is the routing
// policy for the first node, and a flag of 1 indicates its the
// information for the second node.
edgePolicy.Flags = 0
if err := graph.UpdateEdgePolicy(edgePolicy); err != nil {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
return nil, nil, nil, err
}
edgePolicy.Flags = 1
if err := graph.UpdateEdgePolicy(edgePolicy); err != nil {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
return nil, nil, nil, err
}
}
return graph, cleanUp, aliasMap, nil
}
func TestBasicGraphPathFinding(t *testing.T) {
t.Parallel()
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
graph, cleanUp, aliases, err := parseTestGraph(basicGraphFilePath)
defer cleanUp()
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
sourceNode, err := graph.SourceNode()
if err != nil {
t.Fatalf("unable to fetch source node: %v", err)
}
ignoredEdges := make(map[uint64]struct{})
ignoredVertexes := make(map[vertex]struct{})
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// With the test graph loaded, we'll test some basic path finding using
// the pre-generated graph. Consult the testdata/basic_graph.json file
// to follow along with the assumptions we'll use to test the path
// finding.
const startingHeight = 100
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
paymentAmt := lnwire.NewMSatFromSatoshis(100)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
target := aliases["sophon"]
path, err := findPath(graph, sourceNode, target, ignoredVertexes,
ignoredEdges, paymentAmt)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
if err != nil {
t.Fatalf("unable to find path: %v", err)
}
route, err := newRoute(paymentAmt, path, startingHeight)
if err != nil {
t.Fatalf("unable to create path: %v", err)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// The length of the route selected should be of exactly length two.
if len(route.Hops) != 2 {
t.Fatalf("route is of incorrect length, expected %v got %v", 2,
len(route.Hops))
}
// As each hop only decrements a single block from the time-lock, the
// total time lock value should two more than our starting block
// height.
if route.TotalTimeLock != 102 {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
t.Fatalf("expected time lock of %v, instead have %v", 2,
route.TotalTimeLock)
}
// The first hop in the path should be an edge from roasbeef to goku.
if !route.Hops[0].Channel.Node.PubKey.IsEqual(aliases["songoku"]) {
t.Fatalf("first hop should be goku, is instead: %v",
route.Hops[0].Channel.Node.Alias)
}
// The second hop should be from goku to sophon.
if !route.Hops[1].Channel.Node.PubKey.IsEqual(aliases["sophon"]) {
t.Fatalf("second hop should be sophon, is instead: %v",
route.Hops[0].Channel.Node.Alias)
}
// Next, we'll assert that the "next hop" field in each route payload
// properly points to the channel ID that the HTLC should be forwarded
// along.
hopPayloads := route.ToHopPayloads()
if len(hopPayloads) != 2 {
t.Fatalf("incorrect number of hop payloads: expected %v, got %v",
2, len(hopPayloads))
}
// The first hop should point to the second hop.
var expectedHop [8]byte
binary.BigEndian.PutUint64(expectedHop[:], route.Hops[1].Channel.ChannelID)
if !bytes.Equal(hopPayloads[0].NextAddress[:], expectedHop[:]) {
t.Fatalf("first hop has incorrect next hop: expected %x, got %x",
expectedHop[:], hopPayloads[0].NextAddress)
}
// The second hop should have a next hop value of all zeroes in order
// to indicate it's the exit hop.
var exitHop [8]byte
if !bytes.Equal(hopPayloads[1].NextAddress[:], exitHop[:]) {
t.Fatalf("first hop has incorrect next hop: expected %x, got %x",
exitHop[:], hopPayloads[0].NextAddress)
}
// We'll also assert that the outgoing CLTV value for each hop was set
// accordingly.
if route.Hops[0].OutgoingTimeLock != 101 {
t.Fatalf("expected outgoing time-lock of %v, instead have %v",
1, route.Hops[0].OutgoingTimeLock)
}
if route.Hops[1].OutgoingTimeLock != 101 {
t.Fatalf("outgoing time-lock for final hop is incorrect: "+
"expected %v, got %v", 1, route.Hops[1].OutgoingTimeLock)
}
// Additionally, we'll ensure that the amount to forward, and fees
// computed for each hop are correct.
firstHopFee := route.Hops[0].Channel.FeeBaseMSat
if route.TotalAmount != paymentAmt+firstHopFee {
t.Fatalf("first hop forwarding amount incorrect: expected %v, got %v",
paymentAmt+firstHopFee, route.Hops[0].AmtToForward)
}
if route.Hops[0].Fee != firstHopFee {
t.Fatalf("first hop fee incorrect: expected %v, got %v",
firstHopFee, route.Hops[0].Fee)
}
if route.Hops[1].AmtToForward != paymentAmt {
t.Fatalf("second hop forwarding amount incorrect: expected %v, got %v",
paymentAmt+firstHopFee, route.Hops[0].AmtToForward)
}
if route.Hops[1].Fee != 0 {
t.Fatalf("second hop fee incorrect: expected %v, got %v",
0, route.Hops[1].Fee)
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// Next, attempt to query for a path to Luo Ji for 100 satoshis, there
// exist two possible paths in the graph, but the shorter (1 hop) path
// should be selected.
target = aliases["luoji"]
path, err = findPath(graph, sourceNode, target, ignoredVertexes,
ignoredEdges, paymentAmt)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
if err != nil {
t.Fatalf("unable to find route: %v", err)
}
route, err = newRoute(paymentAmt, path, startingHeight)
if err != nil {
t.Fatalf("unable to create path: %v", err)
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// The length of the path should be exactly one hop as it's the
// "shortest" known path in the graph.
if len(route.Hops) != 1 {
t.Fatalf("shortest path not selected, should be of length 1, "+
"is instead: %v", len(route.Hops))
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// As we have a direct path, the total time lock value should be
// exactly the current block height plus one.
if route.TotalTimeLock != 101 {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
t.Fatalf("expected time lock of %v, instead have %v", 1,
route.TotalTimeLock)
}
// Additionally, since this is a single-hop payment, we shouldn't have
// to pay any fees in total, so the total amount should be the payment
// amount.
if route.TotalAmount != paymentAmt {
t.Fatalf("incorrect total amount, expected %v got %v",
paymentAmt, route.TotalAmount)
}
}
func TestKShortestPathFinding(t *testing.T) {
t.Parallel()
graph, cleanUp, aliases, err := parseTestGraph(basicGraphFilePath)
defer cleanUp()
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
sourceNode, err := graph.SourceNode()
if err != nil {
t.Fatalf("unable to fetch source node: %v", err)
}
// In this test we'd like to ensure that our algoirthm to find the
// k-shortest paths from a given source node to any destination node
// works as exepcted.
// In our basic_graph.json, there exist two paths from roasbeef to luo
// ji. Our algorithm should properly find both paths, and also rank
// them in order of their total "distance".
paymentAmt := lnwire.NewMSatFromSatoshis(100)
target := aliases["luoji"]
paths, err := findPaths(graph, sourceNode, target, paymentAmt)
if err != nil {
t.Fatalf("unable to find paths between roasbeef and "+
"luo ji: %v", err)
}
// The algorithm should've found two paths from roasbeef to luo ji.
if len(paths) != 2 {
t.Fatalf("two path shouldn't been found, instead %v were",
len(paths))
}
// Additinoally, the total hop length of the first path returned should
// be _less_ than that of the second path returned.
if len(paths[0]) > len(paths[1]) {
t.Fatalf("paths found not ordered properly")
}
// Finally, we'll assert the exact expected ordering of both paths
// found.
assertExpectedPath := func(path []*ChannelHop, nodeAliases ...string) {
for i, hop := range path {
if hop.Node.Alias != nodeAliases[i] {
t.Fatalf("expected %v to be pos #%v in hop, "+
"instead %v was", nodeAliases[i], i,
hop.Node.Alias)
}
}
}
// The first route should be a direct route to luo ji.
assertExpectedPath(paths[0], "roasbeef", "luoji")
// The second route should be a route to luo ji via satoshi.
assertExpectedPath(paths[1], "roasbeef", "satoshi", "luoji")
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
func TestNewRoutePathTooLong(t *testing.T) {
t.Parallel()
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// Ensure that potential paths which are over the maximum hop-limit are
// rejected.
graph, cleanUp, aliases, err := parseTestGraph(excessiveHopsGraphFilePath)
defer cleanUp()
if err != nil {
t.Fatalf("unable to create graph: %v", err)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
sourceNode, err := graph.SourceNode()
if err != nil {
t.Fatalf("unable to fetch source node: %v", err)
}
ignoredEdges := make(map[uint64]struct{})
ignoredVertexes := make(map[vertex]struct{})
paymentAmt := lnwire.NewMSatFromSatoshis(100)
// We start by confirminig that routing a payment 20 hops away is possible.
// Alice should be able to find a valid route to ursula.
target := aliases["ursula"]
_, err = findPath(graph, sourceNode, target, ignoredVertexes,
ignoredEdges, paymentAmt)
if err != nil {
t.Fatalf("path should have been found")
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// Vincent is 21 hops away from Alice, and thus no valid route should be
// presented to Alice.
target = aliases["vincent"]
path, err := findPath(graph, sourceNode, target, ignoredVertexes,
ignoredEdges, paymentAmt)
if err == nil {
t.Fatalf("should not have been able to find path, supposed to be "+
"greater than 20 hops, found route with %v hops",
len(path))
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
func TestPathNotAvailable(t *testing.T) {
t.Parallel()
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
graph, cleanUp, _, err := parseTestGraph(basicGraphFilePath)
defer cleanUp()
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
sourceNode, err := graph.SourceNode()
if err != nil {
t.Fatalf("unable to fetch source node: %v", err)
}
ignoredEdges := make(map[uint64]struct{})
ignoredVertexes := make(map[vertex]struct{})
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// With the test graph loaded, we'll test that queries for target that
// are either unreachable within the graph, or unknown result in an
// error.
unknownNodeStr := "03dd46ff29a6941b4a2607525b043ec9b020b3f318a1bf281536fd7011ec59c882"
unknownNodeBytes, err := hex.DecodeString(unknownNodeStr)
if err != nil {
t.Fatalf("unable to parse bytes: %v", err)
}
unknownNode, err := btcec.ParsePubKey(unknownNodeBytes, btcec.S256())
if err != nil {
t.Fatalf("unable to parse pubkey: %v", err)
}
_, err = findPath(graph, sourceNode, unknownNode, ignoredVertexes,
ignoredEdges, 100)
if !IsError(err, ErrNoPathFound) {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
t.Fatalf("path shouldn't have been found: %v", err)
}
}
func TestPathInsufficientCapacity(t *testing.T) {
t.Parallel()
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
graph, cleanUp, aliases, err := parseTestGraph(basicGraphFilePath)
defer cleanUp()
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
sourceNode, err := graph.SourceNode()
if err != nil {
t.Fatalf("unable to fetch source node: %v", err)
}
ignoredEdges := make(map[uint64]struct{})
ignoredVertexes := make(map[vertex]struct{})
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// Next, test that attempting to find a path in which the current
// channel graph cannot support due to insufficient capacity triggers
// an error.
// To test his we'll attempt to make a payment of 1 BTC, or 100 million
// satoshis. The largest channel in the basic graph is of size 100k
// satoshis, so we shouldn't be able to find a path to sophon even
// though we have a 2-hop link.
target := aliases["sophon"]
const payAmt = btcutil.SatoshiPerBitcoin
_, err = findPath(graph, sourceNode, target, ignoredVertexes,
ignoredEdges, payAmt)
if !IsError(err, ErrNoPathFound) {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
t.Fatalf("graph shouldn't be able to support payment: %v", err)
}
}
func TestPathInsufficientCapacityWithFee(t *testing.T) {
t.Parallel()
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// TODO(roasbeef): encode live graph to json
// TODO(roasbeef): need to add a case, or modify the fee ratio for one
// to ensure that has going forward, but when fees are applied doesn't
// work
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// TODO(roasbeef): more time-lock calvulation tests